 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Table of Contents Introduction This catalog has been designed to assist you, our customer, identify products to satisfy your connector needs for printed circuit board headers, mass termination connectors preloaded with contacts, crimp-snap contacts and housings, and card edge connectors with preloaded contacts. The list at right identifies by centerline the types of product available and is meant to be of assistance to you in the product selection process. IDC MTA-50 IDC MTA-100 Crimp CST-100 II IDC MTA-156 (c) 1977, 1978, 1979, 1980, 1983, 1986, 1988, 1992, 1993, 1994, 1995, 1999, 2000, 2001, 2002, 2003 and 2005 by Tyco Electronics Corporation. All International Rights Reserved. AMP, AMP-O-LECTRIC, AMP-O-MATIC, AMPOMATOR, CERTI-CRIMP, PRO-CRIMPER, MADISON CABLE and TYCO are trademarks. TEFLON is a trademark of E.I. DuPont De Nemours and Company. Other products, logos, and company names mentioned herein may be trademarks of their respective owners. Introduction and Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2, 3 Connector Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 .050 [1.27] Centerline Connectors MTA-50 IDC Connectors and Headers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-10 Introduction and Wire-to-Board Mateability Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 IDC Connector Kits (Feed-Thru and Closed End) Ribbon Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5, 6 Discrete Wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7, 8 Through-Hole Header Assemblies Vertical and Right-Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Surface Mount Header Assemblies Vertical and Right-Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 .100 [2.54] Centerline Connectors MTA-100 IDC Connectors and Headers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-31 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Wire-to-Board Mateability Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12, 13 Connectors -- UL94V-2 and UL94V-0 Closed End with and without Polarizing Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14, 15 Feed-Thru with and without Polarizing Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15 LED Closed End and Feed-Thru -- UL94V-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14, 15 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16, 17 Posted Connectors Mateability Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18, 19 MTA-100 Posted Connectors (Wire-to-Wire) UL94V-2 Closed End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Feed-Thru . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Headers -- UL94V-0 Flat -- Straight and Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Narrow Flat -- Straight and Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Polarized -- Straight and Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Friction Lock -- Straight and Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Headers with Retention Peg -- Straight Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 High Profile Headers -- Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Polarized -- High Temperature, Straight and Right-Angle Posts . . . . . . . . . . . . . . . . .27 Friction Lock -- High Temperature, Straight and Right-Angle Posts . . . . . . . . . . . . . .28 Polarized -- Surface Mount, Straight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 Friction Lock -- Surface Mount, Straight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 Shrouded -- Straight and Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 CST-100 II Crimp Contacts, Housings and Shrouded Headers . . . . . . . . . . . . . . . . . . . . . . . . .31, 32 .156 [3.96] Centerline Connectors MTA-156 IDC Connectors and Headers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33-57 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 Wire-to-Board Mateability Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34, 35 Connectors -- UL94V-2 and UL94V-0 Closed End with Locking Ramp, with and without Polarizing Tabs . . . . . . . . . . .36, 37 Closed End without Locking Ramp, with and without Polarizing Tabs . . . . . . . . .36, 37 Feed-Thru with Locking Ramp, with and without Polarizing Tabs . . . . . . . . . . . . .38, 39 Feed-Thru without Locking Ramp, with and without Polarizing Tabs . . . . . . . . . . .38, 39 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40-42 Posted Connectors Mateability Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 44 MTA-156 Posted Connectors (Wire-to-Wire) -- UL94V-2 Closed End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45 Feed-Thru . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45 MTA-156 Headers -- UL94V-0 Flat -- Straight Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 Flat -- Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47 Friction Lock -- Straight Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 Friction Lock -- Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 Polarized Lock -- Straight Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 Polarized Lock -- Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51 Friction Lock -- High Temperature, Straight Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 Shrouded -- Straight and Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53 MTA-156 Quad Connectors -- UL94V-0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54, 55 Closed End with Locking Ramp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 Feed-Thru with Locking Ramp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 2 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Table of Contents (Continued) MTA-156 Card Edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56, 57 Connectors -- UL94V-0 Closed End with and without Mounting Ears . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56 Feed-Thru with and without Mounting Ears . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57 SL-156 Crimp Connectors and Headers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58-62 Wire-to-Board Mateability Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58 Wire-to-Board Crimp Contacts and Keying Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59 Wire-to-Board Housings -- UL94V-0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60 Housings with Through Board Latch -- UL94V-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61 Housings and Contacts for Large Insulation Diameter (LID) Wire . . . . . . . . . . . . . . . . . .62 AMP Economy Power (EP) Connector System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63-69 .156 [3.96] Centerline Connectors Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63 Crimp Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64 Plug Housings, Low-Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64 Low-Profile Headers -- Straight and Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . .65 Low-Profile Headers, High Temp. -- Straight and Right-Angle Posts . . . . . . . . . . . . . . .66 .200 [5.08] Centerline Connectors Plug Housings and Straight and Right-Angle Post Headers . . . . . . . . . . . . . . . . . . . . . .67 .312 [7.92] Centerline Connectors Low-Profile Headers -- Straight Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68 Single Connectors 1-Position Plug Housing and High-Profile Header -- Straight Post . . . . . . . . . . . . . . . . .69 MTA Wire Selection and Ribbon Cable Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70 IDC Ribbon Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71-74 MTA Wire Termination Flowchart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75 MTA Application Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76-79 Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80-82 Global Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83 Crimp SL-156 Crimp AMP EP Connectors Need more information? Call Technical Support at the numbers listed below. Technical Support is staffed with specialists well versed in Tyco Electronics products. They can provide you with: I Technical support I Catalogs I Technical Documents I Product Samples I Authorized Distributor Locations Connector Selection Guide Product Name .050" Centerline MTA-50 IDC Connector Kits and Headers .100" Centerline MTA-100 Connectors and Headers CST-100 II Contacts and Housings .156" Centerline MTA-156 Connectors and Headers Quad Connectors SL-156 Contacts and Housings Contact Center- Termin- Wire-toNo. of Wire line ation Option Positions .050 1.27 .100 2.54 .100 2.54 .156 3.96 .156 3.96 .156 3.96 Wire Wire Size Insulation (AWG) Dia. Max. .039* 0.99 .060* 1.52 .065 1.65 .095* 2.41 .095* 2.41 .105 2.67 .112 2.84 .118 3.00 .118 3.00 .118 3.00 Current Rating (A)** Voltage Operating ReplaceUL Rating Temp. ment Flammability Contacts Max. (VAC) Range (C) Approvals IDC Planned 2-28 30-26 1 30 -55 to +105 V-0 & V-2 No R R IDC Yes 2-28 2-28 28-22 26-22 5 4 250 250 -55 to +105 V-0 & V-2 -55 to +105 V-0 Yes Yes R R Crimp Planned R R IDC IDC Crimp Crimp Yes No No No 2-24 2-12 26-18 22-18 7 12.5 10 10 8 (1 pos.) 7.5 (2-12 Pos.) 7.5 (2-12 Pos.) 7.5 (2-5 Pos.) 600 600 250 250 -55 to +105 V-0 & V-2 -55 to +105 -25 to +105 -25 to +105 V-0 V-0 V-0 Yes Yes Yes Yes R R R R 1-24; 2-10 w/ through 24-18 board latch 2-24 24-16 R R SL-156 Large Ins. Dia. (LID) .156 Contacts and Housings 3.96 .156", .200" and .312" Centerlines .156 3.96 AMP Economy Power .200 (EP) Connector System 5.08 .312 7.92 R R Crimp Crimp Crimp No No No 1-12 2-12 2-5 22-18 22-18 22-18 250 250 250 -25 to +105 -25 to +105 -25 to +105 V-0 V-0 V-0 Yes Yes Yes R R R R R R ** When terminated one position at a time. ** Current Rating is application dependent. 3 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-50 IDC Connectors and Headers Product Facts I I I I I I I I I I I I 2-28 contact positions Connectors terminate 26, 28 and 30 AWG discrete wire or .050 [1.27] centerline ribbon cable Color-coded housings Maximum cable insulation diameter of .039 [0.99] with PVC insulation only IDC contacts pre-loaded in receptacle housing 30 V, 1 A contact rating Contact design allows for gold-to-gold or tin-to-tin interface Contacts are lubricated to prevent fretting corrosion Wire feed-thru capability for daisy-chain wiring or closed end for point-to-point wiring Connectors are polarized for proper mating Manual and semiautomatic application tooling Mating heights shown below: MTA-50 .050 [1.27] .503 [12.78] or .254 [6.45] Max. Vertical Max. Right-Angle The MTA-50 IDC Connector System is a wire-to-printed circuit board system with contacts in a staggered, single row on .050 [1.27] centerline. The design features wire feedthrough capability for daisychain applications. Insulation displacement contacts are used to terminate a wide range of conductor sizes. Ribbon cable can also be terminated when the appropriate receptacle assembly and strain relief cover are used. Header assemblies for board mount applications include right-angle (horizontal) and vertical mount products. These are available in through-hole and surface mount configurations. Typical uses of the MTA-50 IDC connectors would be in the Appliance, Commercial and Home Equipment and Security products industries. See the following pages for related products: I Ribbon Cable (reels), .050 [1.27] centerline (p. 71) I Application Tooling (p. 76) I Cable Assemblies (p. 74) Dielectric Withstanding Voltage -- 500 VAC Insulation Resistance -- 1,000 megohms Operating Temperature -- -55C to +105C for connector only; cable rating may be lower Technical Documents Application Specification -- 114-13072 MTA-50 Connectors Product Specifications -- 108-2113 MTA-50 Connectors 100-4703 MADISON CABLE Cable Specification (28 AWG, 7/36 Tinned copper, PVC insulation) 100-6257 MADISON CABLE Cable Specification (28 AWG, 7/36 Tinned copper, TPO insulation) Performance Data Voltage Rating -- 30 VAC Current Rating -- 1 amp max. Low-Level Resistance -- 30 milliohms I 1445 120 1445 121 1445 169 1445 172 1445 125 1445 126 1445 171 1445 174 These matrixes have been prepared to assist you in defining the correct mating halves for the MTA-50 header and connector kit combination. Where a "Y" is indicated the combination is a valid mating pair. Note: Tyco Electronics does NOT recommend intermating connectors and headers with different contact platings. 1445341 1445344 1445347 1445350 1445353 1445356 1445359 1445362 1445365 1445368 1445371 1445374 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 1445343 1445346 1445349 1445352 1445355 1445358 1445361 1445364 1445367 1445370 1445373 1445376 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 1445342 1445345 1445348 1445351 1445354 1445357 1445360 1445363 1445366 1445369 1445372 1445375 Y Y Y Y Y Y Y Y Y Y Y Y Connector Kits Connector Kits Matrix for Tin Plated Part Numbers Matrix for .000030 [0.00076] Gold Plated Part Numbers USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 4 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 Connector Kits Matrix for .000015 [0.00038] Gold Plated Part Numbers 1445 123 1445 124 1445 170 1445 173 Component Recognized by Underwriters Laboratories Inc. to US and Canadian Standards, File No. E28476 (Connectors and Headers) File No. E53793 (Ribbon Cable) MTA-50 IDC Connector Kit / Header Mateability Guide Headers Headers Headers Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-50 IDC Connectors and Headers (Continued) Feed-Thru and Closed End Connectors Receptacle Assemblies -- Ribbon Cable .004 A [ 0.10] (See Note 1) MTA-50 .050 [1.27] .315 .006 [8.00 0.15] .150 [3.81] Material and Finish Housing -- UL 94V-2 rated, thermoplastic Contacts -- Phosphor bronze; .000100 [0.00254] min. tin in wire termination area, over .000050 [0.00127] min. nickel; choice on mating end: .000100 [0.00254] min. tin or .000030 [0.00076] gold or .000015 [0.00038] gold, over .000050 [0.00127] min. nickel Position 1 .050 Ref. [1.27] .035 Ref. [0.89] .190 .003 [4.83 0.08] .100 .003 [2.54 0.08] Notes: 1. To determine connector overall length (dim. A), multiply .050 x the number of circuits and add .082. Example: .050 x 10 circuits equals 0.50 + .082 = .582 [14.78]. 2. Strain relief covers shown on page 6 are required and sold as part of the Connector Kit. 3. Stranded UL Style 1061 or equivalent wire is recommended. Color Coding by Wire Size for UL94V-0 Connectors 26 AWG -- Blue 28 AWG -- Green 30 AWG -- Brown For Strain Relief Covers see page 6. For mating Headers see pages 9 and 10. For Mateability Guide, see matrixes on page 4. 4. Unless otherwise stated all tolerances (except plating) to be .005 [0.13]. 5. Consult Product Drawing for RoHS Compliant information. Connector Kits -- Ribbon Cable Base Part Numbers Connector Type & Wire Size Feed-Thru Connector Kit No. of Part Nos. Circuits Closed End Connector Kit No. of Part Nos. Circuits Connector Kit Ordering Information Connector Kit consists of Receptacle Assembly and Strain Relief Cover. Base part number prefixes and suffixes indicate the number of circuit positions, for example: Base part number 1445359 2 position = 0-1445359-2 and 28 position = 2-1445359-8 Note: Tin-plated connectors and headers in even position sizes from 2-12 and 18 are stocked parts; all other position sizes and products with gold-plated contacts are Make To Order. Tin Plated 26 AWG 1445359 0.12-0.15 mm2 28 AWG 1445362 0.08-0.09 mm2 30 AWG 1445365 0.05-0.06 mm2 .000030 [0.00076] Gold Plated 26 AWG 1445361 0.12-0.15 mm2 28 AWG 1445364 0.08-0.09 mm2 30 AWG 1445367 0.05-0.06 mm2 .000015 [0.00038] Gold Plated 26 AWG 1445360 0.12-0.15 mm2 28 AWG 1445363 0.08-0.09 mm2 30 AWG 1445366 0.05-0.06 mm2 2-28 2-28 2-28 1445368 1445371 1445374 2-28 2-28 2-28 2-28 2-28 2-28 1445370 1445373 1445376 2-28 2-28 2-28 2-28 2-28 2-28 1445369 1445372 1445375 2-28 2-28 2-28 5 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-50 IDC Connectors and Headers (Continued) Connector Kits -- Ribbon Cable (Continued) MTA-50 .050 [1.27] Strain Relief Covers Material and Finish Strain Relief Cover -- UL 94V-0 rated, thermoplastic, black .040 2 Plcs. [1.02] .068 2 Plcs. [1.73] .090 4 Plcs. [2.29] Feed-Thru A .237 .008 [6.02 0.20] .123 .006 [3.12 0.15] Feed-Thru Closed End A .255 [6.48] .237 .008 [6.02 0.20] Closed End Feed-Thru and Closed End No. of Circuits 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Dim. A .260 6.60 .310 7.87 .360 9.14 .410 10.41 .460 11.68 .510 12.95 .560 14.22 .610 15.49 .660 16.76 .710 18.03 .760 19.30 .810 20.57 .860 21.84 .910 23.11 No. of Circuits 16 17 18 19 20 21 22 23 24 25 26 27 28 Dim. A .960 24.38 1.010 25.65 1.060 26.92 1.110 28.19 1.160 29.46 1.210 30.73 1.260 32.00 1.310 33.27 1.360 34.54 1.410 35.81 1.460 37.08 1.510 38.35 1.560 39.62 6 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-50 IDC Connectors and Headers (Continued) Feed-Thru and Closed End Connectors Receptacle Assemblies -- Discrete Wire .004 [ 0.10] (See Note 1) A MTA-50 .050 [1.27] .315 .006 [8.00 0.15] .150 [3.81] Material and Finish Housing -- UL 94V-2 rated, thermoplastic Contacts -- Phosphor bronze; .000100 [0.00254] min. tin in wire termination area, over .000050 [0.00127] min. nickel; choice on mating end: .000100 [0.00254] min. tin or .000030 [0.00076] gold or .000015 [0.00038] gold, over .000050 [0.00127] min. nickel Position 1 .050 Ref. [1.27] .035 Ref. [0.89] .190 .003 [4.83 0.08] .100 .003 [2.54 0.08] Notes: 1. To determine connector overall length (dim. A), multiply .050 x the number of circuits and add .082. Example: .050 x 10 circuits equals 0.50 + .082 = .582 [14.78]. 2. Strain relief covers shown on page 8 are required and sold as part of the Connector Kit. 3. Stranded UL Style 1061 or equivalent wire is recommended. Color Coding by Wire Size for UL94V-0 Connectors 26 AWG -- Blue 28 AWG -- Green 30 AWG -- Brown For Strain Relief Covers see page 8. For mating Headers see pages 9 and 10. For Mateability Guide, see matrixes on page 4. 4. Unless otherwise stated all tolerances (except plating) to be .005 [0.13]. 5. Consult Product Drawing for RoHS Compliant information. Connector Kits -- Discrete Wire Connector Kit Ordering Information Connector Kit consists of Receptacle Assembly and Strain Relief Cover. Base part number prefixes and suffixes indicate the number of circuit positions, for example: Base part number 1445341 2 position = 0-1445341-2 and 28 position = 2-1445341-8 Note: Tin-plated connectors and headers in even position sizes from 2-12 and 18 are stocked parts; all other position sizes and products with gold-plated contacts are Make To Order. Base Part Numbers Connector Type & Wire Size Feed-Thru Connector Kit No. of Part Nos. Circuits Closed End Connector Kit No. of Part Nos. Circuits Tin Plated 26 AWG 1445341 0.12-0.15 mm2 28 AWG 1445344 0.08-0.09 mm2 30 AWG 1445347 0.05-0.06 mm2 .000030 [0.00076] Gold Plated 26 AWG 1445343 0.12-0.15 mm2 28 AWG 1445346 0.08-0.09 mm2 30 AWG 1445349 0.05-0.06 mm2 .000015 [0.00038] Gold Plated 26 AWG 1445342 0.12-0.15 mm2 28 AWG 1445345 0.08-0.09 mm2 30 AWG 1445348 0.05-0.06 mm2 2-28 2-28 2-28 1445350 1445353 1445356 2-28 2-28 2-28 2-28 2-28 2-28 1445352 1445355 1445358 2-28 2-28 2-28 2-28 2-28 2-28 1445351 1445354 1445357 2-28 2-28 2-28 7 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-50 IDC Connectors and Headers (Continued) Connector Kits -- Discrete Wire (Continued) MTA-50 .050 [1.27] Strain Relief Covers Material and Finish Strain Relief Cover -- UL 94V-0 rated, thermoplastic, black .040 2 Plcs. [1.02] .068 2 Plcs. [1.73] Feed-Thru .090 4 Plcs. [2.29] A .237 .008 [6.02 0.20] .123 .006 [3.12 0.15] Feed-Thru Closed End A .255 [6.48] .237 .008 [6.02 0.20] Closed End Feed-Thru and Closed End No. of Circuits 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Dim. A .260 6.60 .310 7.87 .360 9.14 .410 10.41 .460 11.68 .510 12.95 .560 14.22 .610 15.49 .660 16.76 .710 18.03 .760 19.30 .810 20.57 .860 21.84 .910 23.11 No. of Circuits 16 17 18 19 20 21 22 23 24 25 26 27 28 Dim. A .960 24.38 1.010 25.65 1.060 26.92 1.110 28.19 1.160 29.46 1.210 30.73 1.260 32.00 1.310 33.27 1.360 34.54 1.410 35.81 1.460 37.08 1.510 38.35 1.560 39.62 8 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-50 IDC Connectors and Headers (Continued) Through-Hole Header Assemblies Vertical Circuit #1 A .035 [0.89] Ref. Note: To determine header overall length (dim. A), multiply .050 x the number of circuits and add .150. Example: .050 x 6 circuits equals .300 + .150 = .450 [11.43]. .170 [4.32] MTA-50 .050 [1.27] .220 .003 [5.59 0.08] .060 [1.52] .125 [3.18] Ref. .050 Ref. [1.27] .016 Ref. [0.41] Material and Finish Housing -- UL 94V-0 rated, thermoplastic, black Contacts -- Brass, .000100 [0.00254] min. tin over .000050 [0.00127] min. nickel on solder legs; choice on mating end: .000100 [0.00254] min. tin or .000030 [0.00076] gold or .000015 [0.00038] gold, over .000050 [0.00127] min. nickel .035 Ref. [0.89] Base Part Numbers .060 .003 Dia. [1.52 0.08] .068 [1.73] .100 Typ. [2.54] .050 Typ. [1.27] .031 .002 Dia. Typ. [0.78 0.05] .0705 [1.90] Circuit #1 .250* [6.35] .035 [0.89] Recommended Mounting Hole Size and Pattern for .062 [1.57] Thick PC Board Through-Hole Header No. of Part Nos. Posts Standard UL 94V-0, Tin Plated 1445120 2-28 Standard UL 94V-0 .000030 [0.00076] Gold Plated 1445125 2-28 Standard UL 94V-0 .000015 [0.00038] Gold Plated 1445123 2-28 * 6-circuit Dim. shown, refer to Product Drawing for actual PCB Dimensions and RoHS Compliant information. Right-Angle A Circuit #1 .035 [0.89] Ref. .220 .003 [5.59 0.08] For mating Connector Kits see pages 5 through 8. For mateability options, see matrixes on page 4. Header Ordering Information Base part number prefixes and suffixes indicate the number of circuit positions, for example: Base part number 1445120 2 position = 0-1445120-2 and 28 position = 2-1445120-8 Note: Tin-plated connectors and headers in even position sizes from 2-12 and 18 are stocked parts; all other position sizes and products with gold-plated contacts are Make To Order. .180 [4.57] .125 Ref. [3.18] .016 [0.41] Ref. .100 [2.54] .031 .002 Dia. Typ. [0.78 0.05] Circuit #1 .210 [5.33] .050 Typ. [1.27] .050 Ref. [1.27] .035 [0.89] .035 Ref. [0.89] Base Part Numbers Through-Hole Header No. of Part Nos. Posts Standard UL 94V-0, Tin Plated 1445169 2-28 Standard UL 94V-0 .000030 [0.00076] Gold Plated 1445171 2-28 Standard UL 94V-0 .000015 [0.00038] Gold Plated 1445170 2-28 .250* [6.35] Recommended Mounting Hole Size and Pattern for .062 [1.57] Thick PC Board * 6-circuit Dim. shown, refer to Product Drawing for actual PCB Dimensions and RoHS Compliant information. 9 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-50 IDC Connectors and Headers (Continued) Surface Mount Header Assemblies MTA-50 .050 [1.27] Vertical Circuit #1 A .170 [4.32] .035 Ref. [0.89] Note: To determine header overall length (dim. A), multiply .050 x the number of circuits and add .150. Example: .050 x 6 circuits equals .300 + .150 = .450 [11.43]. .220 .003 [5.59 0.08] .249 Ref. [6.32] Material and Finish Housing -- UL 94V-0 rated, thermoplastic, black Contacts -- Brass, .000100 [0.00254] min. tin over .000050 [0.00127] min. nickel on solder pads; choice on mating end: .000100 [0.00254] min. tin or .000030 [0.00076] gold or .000015 [0.00038] gold, over .000050 [0.00127] min. nickel Boardlock -- Phosphor bronze, tin plated .000100 [0.000254] min. over .000050 [0.00127] min. nickel .100 Typ. [2.54] .050 Typ. [1.27] .100 .162 [2.54] [4.11] .028 .001 Typ. [0.71 0.03] .065 .001 Typ. [1.65 0.03] .070 .003 2 Plcs. [1.78 0.08] Base Part Numbers Surface Mount Header No. of Part Nos. Posts Standard UL 94V-0, Tin Plated 1445121 2-28 Standard UL 94V-0 .000030 [0.00076] Gold Plated 1445126 2-28 Standard UL 94V-0 .000015 [0.00038] Gold Plated 1445124 2-28 Note: All SMT product is prepackaged in standard tape and reel format. .100 [2.54] .145 .003 [3.68 0.08] 2 Plcs. Circuit #1 .574* [14.58] Recommended PC Board Layout for use with .010 [0.25] Thick Stencil * 6-circuit Dim. shown, refer to Product Drawing for actual PCB Dimensions and RoHS Compliant information. Right-Angle A .035 Ref. [0.89] .050 Ref. [1.27] .220 .003 [5.59 0.08] Circuit #1 For mating Connector Kits see pages 5 through 8. For mateability options, see matrixes on page 4. Header Ordering Information Base part number prefixes and suffixes indicate the number of circuit positions, for example: Base part number 1445121 2 position = 0-1445121-2 and 28 position = 2-1445121-8 Note: Tin-plated connectors and headers in even position sizes from 2-12 and 18 are stocked parts; all other position sizes and products with gold-plated contacts are Make To Order. .180 [4.57] .162 [4.11] .050 Typ. [1.27] .028 .001 Typ. [0.71 0.03] .270 Ref. [6.86] .128 [3.25] Circuit #1 .075 .001 [1.91 0.03] .145 .003 [3.68 0.08] 2 Plcs. .070 .003 [1.78 0.08] 2 Plcs. Base Part Numbers Surface Mount Header No. of Part Nos. Posts Standard UL 94V-0, Tin Plated 1445172 2-28 Standard UL 94V-0 .000030 [0.00076] Gold Plated 1445174 2-28 Standard UL 94V-0 .000015 [0.00038] Gold Plated 1445173 2-28 .100 [2.54] .574* [14.58] Recommended PC Board Layout for use with .010 [0.25] Thick Stencil * 6-circuit Dim. shown, refer to Product Drawing for actual PCB Dimensions and RoHS Compliant information. 10 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors .100 [2.54] Centerline MTA-100 IDC Connectors and Headers Product Facts I I I I I I I I I I I I I Connectors and headers for 2 through 28 positions; wire sizes of 22, 24, 26 and 28 AWG [0.4-0.08 mm2] Wire-to-Post Connectors preloaded with dual beam contacts Connectors and headers, except shrouded headers, are end-to-end stackable Connector styles include both closed end and feedthru connectors with locking ramps, with and without polarizing tabs Molded ribs on housing do not allow reverse mating Posted connectors for 2 through 19 positions Connectors preloaded with IDC contacts All contacts are slotted for insulation displacement (IDC) terminal technique Contacts are lubricated for fretting corrosion protection Benefits derived from the MTA-100 system include increased quality and ease of handling such as -- I One-step assembly I No wire stripping I No contact damage I Reduced wiring errors I Simpler tooling I Simple maintenance and repair Meets the material requirements of Table 23.1 of UL1410 Standards for Television Receiver and Video Products (wire-topost connectors only) Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 Certified by Canadian Standards Association, File No. LR7189 R R MTA-100 .100 [2.54] Technical Documents Product Specification 108-1050 MTA-100 Connectors Application Specifications 114-1019 MTA-100 Connectors 114-1031 MTA-100 Ribbon Cable Assembly MTA-100 connectors accept discrete and ribbon cable wire sizes ranging from 22 - 28 AWG [0.4 - 0.08 mm2] with maximum insulation outside diameter of .060 [1.52] for terminating single wire and .050 [1.27] for mass termination of wires. Tin plated solid, fused stranded, or stranded (7 strands) wire with PVC insulation can be used on 22 - 28 AWG [0.4 - 0.9 mm2] MTA-100 connectors and 19 stranded wire on 22-24 AWG [0.4- 0.2 mm2] MTA-100 connectors. Only one wire to be terminated into an IDC contact slot. The wire-to-post connector housing material is flame retardant thermoplastic, either UL94V-2 or UL94V-0 rated. A full line of .100 [2.54] centerline headers completes the system. Headers are available with straight or right-angle posts, in flat, polarized or friction lock styles. Headers are available in 2 through 28 positions. Shrouded headers are available in 2 through 14 positions. Performance Data* Voltage Rating -- 250 vac Current Rating -- 5 amp max. Low-Level Resistance -- 6 m max. initial Dielectric Withstanding Voltage -- 750 vac/1 min. Insulation Resistance -- 5000 M min. initial Operating Temperature -- 55 C to 105 C Note: Refer to page 70 for approved wire listings. *Refer to the Product Specification for additional electrical, mechanical and environmental performance tests and requirements. 11 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-100 Connector/Header Mateability Guide This matrix has been prepared to assist you, our customer, in defining the correct mating halves for the MTA-100 header and connector combination. Where a "Y" is indicated the combination is a valid mating pair. Where an "N" is indicated the combination is not acceptable for mating. MTA-100 .100 [2.54] Matrix for Tin Plated Part Numbers Headers 6404 52 6404 53 6404 54 6404 55 6404 56 6404 57 6444 56 6444 57 6444 86 6444 88 6446 94 6446 95 6448 03 6448 61 6448 74 6448 75 6448 76 6448 77 6448 92 6448 93 6448 94 6470 47 6470 48 6470 50 6470 51 6471 06 6471 66 6475 02 6475 31 6476 09 6476 23 6475 32 1744 075 640440 640441 640442 640443 640468 640469 640470 640471 640620 640621 640622 640623 641311 641312 641313 641314 641534 641535 641536 641537 641653 641654 641655 641656 643498 643813 643814 643815 643816 643828 644083 644312 644313 644497 644511 644512 644513 644514 644540 644563 644564 644565 644574 644575 644576 644577 644578 644579 644795 *1375820 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N Y N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N Y N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Connectors 12 Catalog 82056 Revised 6-08 www.tycoelectronics.com *Select contact plating to match header plating. Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-100 Connector/Header Mateability Guide (Continued) This matrix has been prepared to assist you, our customer, in defining the correct mating halves for the MTA-100 header and connector combination. Where a "Y" is indicated the combination is a valid mating pair. Where an "N" is indicated the combination is not acceptable for mating. 641237 641238 641239 641240 641241 641242 641243 641244 644020 644042 644043 644044 644702 644726 *1375820 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 641190 641191 641192 641193 641198 641199 641200 641201 644038 644040 647477 647480 *1375820 1744020 Y Y Y Y Y Y Y Y Y Y Y Y N Y Connectors *Select contact plating to match header plating. 6411 22 6411 23 6411 24 6411 25 6411 26 6411 27 6448 88 6448 89 6448 90 6448 91 6470 75 6470 76 6470 78 6470 79 6471 07 6471 67 6474 67 6476 25 6476 27 6475 33 1744 074 Matrix for .000015 [0.00038] Gold Plated Part Numbers Connectors 6412 11 6412 12 6412 13 6412 14 6412 15 6412 16 6444 87 6444 89 6448 84 6448 85 6448 86 6448 87 6448 96 6448 97 6448 98 6471 08 6471 09 6471 14 6471 16 6471 17 6471 68 6476 26 6476 24 6475 34 1744 047 1744 163 Matrix for .000030 [0.00076] Gold Plated Part Numbers Headers MTA-100 .100 [2.54] Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N N N N N N N N N N N N N N Y N N N N N N N N N N N N N N Y N N N N N N N N N N N N N N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Headers Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 13 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-100 IDC Connectors--Closed End and Feed-Thru Material and Finish Housing -- UL94V-2 rated, nylon, see below for color; or UL94V-0 rated, nylon, black Contacts -- Phosphor bronze, post tin plated, .000030 [0.00076] or .000015 [0.00038] post gold-plated over nickel Closed End Connectors .275 [6.99] .075 [1.91] .275 [6.99] .245 [6.22] A .056 [1.42] MTA-100 .100 [2.54] Color Coding by Wire Size for UL94V-2 Connectors 28 AWG -- Green 26 AWG -- Blue 24 AWG -- White 22 AWG -- Red All wire sizes in UL94V-0 -- Black .184 [4.67] .520 [13.21] .100 Typ. [2.54] Without Polarizing Tabs .075 [1.91] For mateability options, see matrix on pages 12 and 13. For mating half visuals, see pages 20 thru 30. With Polarizing Tabs Notes: 1. Refer to pages 70-74 for approved wire listing. 2. For strain reliefs and dust covers, see page 16. 3. For keying plugs, see page 17. 4. Other circuit sizes are available upon request. Minimums may apply. 5. Connector circuits can be molded closed for keying purposes. Minimums may apply. 6. Where no part numbers appear in the chart, parts can be made available upon request. Minimums may apply. 7. To determine connector overall length (dim. A), multiply .100 x the number of circuits. Example: .100 x 10 circuits equals 1.000 inch [25.4 mm]. .228 [5.80] Feed-Thru Connectors .275 [6.99] .075 [1.91] .305 [7.75] .245 [6.22] A .056 [1.42] .184 [4.67] .520 [13.21] .100 Typ. [2.54] Without Polarizing Tabs .075 [1.91] .228 [5.80] With Polarizing Tabs 14 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-100 IDC Connectors--Closed End and Feed-Thru (Continued) Connector Ordering Information The "Base Part Numbers" Chart at right shows the base part number, and their RoHS (Restrictions on Certain Hazardous Substances) Compliant (lead free) equivalent available for the described connectors. Prefixes and suffixes are determined by the number of circuit positions in the connector. For example, the complete part number for a 10-position closed end connector without polarizing tabs for 22 AWG wire would be: Base number 640440 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-640440-0 All part numbers are the RoHS equivalent version. Example: No. of Pos. 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Lead Free RoHS Prefix/Suffix 3-640440-2 3-640440-3 3-640440-4 3-640440-5 3-640440-6 3-640440-7 3-640440-8 3-640440-9 4-640440-0 4-640440-1 4-640440-2 4-640440-3 4-640440-4 4-640440-5 4-640440-6 4-640440-7 4-640440-8 4-640440-9 5-640440-0 5-640440-1 5-640440-2 5-640440-3 5-640440-4 5-640440-5 5-640440-6 5-640440-7 5-640440-8 Base Part Numbers Closed End Without Tabs Connector Type & Wire Size Connector Part Nos. RoHS Equiv. With Tabs Connector Part Nos. RoHS Equiv. Without Tabs Connector Part Nos. RoHS Equiv. Feed-Thru With Tabs Connector Part Nos. RoHS Equiv. Standard UL94V-2, Tin Plated 22 AWG 640440 0.3-0.4 mm2 24 AWG 640441 0.2 mm2 26 AWG 640442 0.12-0.15 mm2 28 AWG 640443 0.08-0.09 mm2 MTA-100 .100 [2.54] 32-58 32-58 32-58 32-58 643813 643814 643815 643816 32-58 32-58 32-58 32-58 640620 640621 640622 640623 32-58 32-58 32-58 32-58 6445401 6445631 6445641 6445651 32-45 32-54 32-45 32-45 Tape Mounted on Reel UL94V-2, Tin Plated 22 AWG 640468 32-58 0.3-0.4 mm2 24 AWG 640469 32-58 0.2 mm2 26 AWG 640470 32-58 0.12-0.15 mm2 28 AWG 640471 32-58 0.08-0.09 mm2 Standard UL94V-2, .000030 [0.00076] Gold Plated 22 AWG 641237 32-58 0.3-0.4 mm2 24 AWG 641238 32-58 0.2 mm2 26 AWG 641239 32-58 0.12-0.15 mm2 28 AWG 641240 32-58 0.8-0.9 mm2 644511 644512 644513 644514 42-68 32-58 32-58 32-58 641311 641312 641313 641314 32-58 32-58 32-58 32-58 -- -- -- -- -- -- -- -- 644042 644020 644043 1 32-58 32-58 32-44 32-44 641241 641242 641243 641244 32-58 32-58 32-58 32-58 6447021 -- 644726 -- 1 32-45 -- 32-45 -- 6440441 Standard UL94V-2, .000015 [0.00038] Gold Plated 22 AWG 641190 32-58 6440381 0.3-0.4 mm2 24 AWG 641191 32-58 17440201 0.2 mm2 26 AWG 641192 32-58 6440401 0.12-0.15 mm2 28 AWG 641193 32-58 -- 0.08-0.09 mm2 LED*, UL94V-2, Tin Plated (See Note 1) 22 AWG 641534 0.3-0.4 mm2 24 AWG 641535 0.2 mm2 26 AWG 641536 0.12-0.15 mm2 28 AWG 641537 0.08-0.09 mm2 32-44 32-44 32-44 -- 641198 641199 641200 641201 32-58 32-58 32-58 32-58 647477 -- 647480 -- 32-46 -- 32-43 -- 32-33 32-33 32-33 32-33 -- 644795 -- -- -- 32-33 -- -- 641653 641654 641655 641656 32-33 32-33 32-33 32-33 -- -- -- -- -- -- -- -- Standard UL94V-0, Tin Plated (Gold is available, minimums may apply.) (Black in color) 22 AWG 32-45 6440831 32-45 6445751 6434981 0.3-0.4 mm2 24 AWG 6445741 32-45 6443121 32-45 6445761 0.2 mm2 26 AWG 6438281 32-45 6443131 32-45 6445771 0.12-0.15 mm2 32-45 32-45 32-45 6445781 6445791 6444971 32-45 32-45 32-45 *LED connectors are designed to mate with .014-.020 [0.36-0.51] diameter posts or square leads. 1 Other circuit sizes are available upon request. Minimums may apply. 2 Tape mounted. Note: Blocked circuit configurations are available. Contact product engineer or product manager for details. Minimums may apply. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. 15 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-100 IDC Connector Accessories Covers Material (RoHS Compliant) Strain Relief Cover -- UL94V-2 rated, nylon, white Dust Covers -- UL94V-0 rated, polyester, white A Closed End Strain Relief Covers .127 [3.23] .345 [8.76] Closed End Dust Covers Retention Dimple .335 [8.51] .340 [8.64] MTA-100 .100 [2.54] .360 [9.14] .105 [2.67] A .130 [3.3] Note: This portion of the front locking bar may or may not be present. Feed-Thru Strain Relief Covers .127 [3.23] .360 [9.14] Feed-Thru Dust Covers Retention Dimple A .245 [6.22] .395 [10.03] Cover Ordering Information The "Base Part Numbers" Chart at right shows the base part number and number of circuits available for the described cover. Prefixes and suffixes are determined by the number of circuit positions in the cover. For example, the complete part number for a 10-position closed end strain relief cover would be: Base number 643075 plus prefix-and-suffix 1- -- -0 The correct ordering number is 1-643075-0 Note: This portion of the front locking bar may or may not be present. A .130 [3.3] Base Part Numbers Closed End Strain Relief Dust Covers Covers Cover No. of Cover No. of Part Nos. Circuits Part Nos. Circuits 643075 2-28 640550 2-28 Feed-Thru Strain Relief Dust Covers Covers Cover No. of Cover No. of Part Nos. Circuits Part Nos. Circuits 643077 2-28 640642 3-28 Cover Length No. of Circuits 2 3 4 5 6 7 8 Dim. A .200 5.08 .300 7.62 .400 10.16 .500 12.7 .600 15.24 .700 17.78 .800 20.32 Prefix/ Suffix -2 -3 -4 -5 -6 -7 -8 No. of Circuits 9 10 11 12 13 14 15 Dim. A .900 22.86 1.00 25.4 1.100 27.94 1.200 30.48 1.300 33.02 1.400 35.56 1.500 38.1 Prefix/ Suffix -9 1- -0 1- -1 1- -2 1- -3 1- -4 1- -5 No. of Circuits 16 17 18 19 20 21 22 Dim. A 1.600 40.64 1.700 43.18 1.800 45.72 1.900 48.26 2.000 50.8 2.100 53.34 2.200 55.88 Prefix/ Suffix 1- -6 1- -7 1- -8 1- -9 2- -0 2- -1 2- -2 No. of Circuits 23 24 25 26 27 28 Dim. A 2.300 58.42 2.400 60.96 2.500 63.5 2.600 66.04 2.700 68.58 2.800 71.12 Prefix/ Suffix 2- -3 2- -4 2- -5 2- -6 2- -7 2- -8 16 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-100 IDC Connector Accessories (Continued) Keying Plug with Carrier Strip (10 plugs per strip) Part No. 641994-1 Material (RoHS Compliant) UL94V-2 rated, nylon, natural color .065 [1.65] .077 [1.96] .300 [7.62] .027 Sq. [0.69] .038 [0.97] MTA-100 .100 [2.54] Note: Removal of contact is not necessary when using keying plug. .125 [3.18] .500 Ref. [12.7] 1.800 Ref. [45.72] Replacement IDC Contacts AWG Wire Size mm 2 Material and Finish Phosphor bronze, post tin plated; .000030 [0.00076] or .000015 [0.00038] post gold plated over nickel Note: Tyco Electronics does not recommend terminating an MTA contact more than one time. Use replacement contacts when required for field repairs or wire changes. 22 24 26 28 0.3-0.4 0.2 0.12-0.15 0.08-0.09 Standard Tin Plated 640636-3 640637-3 640638-3 640639-2 Part Numbers .000030 [0.00076] .000015 [0.00038] Gold Plated Gold Plated 641186-4 641186-3 641187-4 641187-3 641188-4 641188-3 641189-4 641189-3 LED Tin Plated 641643-2 641644-2 641645-2 641646-2 Crimp Snap-In Contacts Material and Finish Phosphor bronze, tin plated .425 [10.8] .070 [1.78] .070 [1.78] .142 [3.61] Max. Wire Size AWG mm2 26-22 0.12-0.4 **Hand Tool No. 59836-1 (IS 408-6527) **Applicator No. 466747-1 (IS 408-8040) Special applications for crimp snap-in contacts are: 1. Double wire per contact 2. Coax or shielded wire 3. Mixed wire size in same connector Note: Only one crimp snap-in contact per connector. Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. 2 .452 [11.48] .075 [1.91] Part Nos. Loose Piece* Strip** 640709-2 640708-2 17 USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-100 Posted Connector/Connector Mateability Guide This matrix has been prepared to assist you, our customer, in defining the correct mating halves for the MTA-100 posted connector and connector combination. Where a "Y" is indicated the combination is a valid mating pair. Where an "N" is indicated the combination is not acceptable for mating. MTA-100 .100 [2.54] Matrix for Tin Plated Part Numbers Posted Connectors 6470 00 6470 01 6470 02 6470 03 6470 04 6470 05 6470 06 6470 07 640440 640441 640442 640443 640468 640469 640470 640471 640620 640621 640622 640623 641311 641312 641313 641314 641534 641535 641536 641537 641653 641654 641655 641656 643498 643813 643814 643815 643816 643828 644083 644312 644313 644497 644511 644512 644513 644514 644540 644563 644564 644565 644574 644575 644576 644577 644578 644579 644795 1375820 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y* Y* Y* Y* Y Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y Y Y Y Y* Y* Y* N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y* Y* Y* Y* Y Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y Y Y Y Y* Y* Y* N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y* Y* Y* Y* Y Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y Y Y Y Y* Y* Y* N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y* Y* Y* Y* Y Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y Y Y Y Y* Y* Y* N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y* Y* Y* Y* Y Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y Y Y Y Y* Y* Y* N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y* Y* Y* Y* Y Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y Y Y Y Y* Y* Y* N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y* Y* Y* Y* Y Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y Y Y Y Y* Y* Y* N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y* Y* Y* Y* Y Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y* Y Y Y Y Y* Y* Y* N Connectors 18 Catalog 82056 Revised 6-08 www.tycoelectronics.com *2 & 3 position MTA-100 Posted Connectors can not mate with MTA-100 connectors with polarizing tabs. Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-100 Posted Connector/Connector Mateability Guide (Continued) This matrix has been prepared to assist you, our customer, in defining the correct mating halves for the MTA-100 posted connector and connector combination. Where a "Y" is indicated the combination is a valid mating pair. Where an "N" is indicated the combination is not acceptable for mating. 641237 641238 641239 641240 641241 641242 641243 641244 644020 644042 644043 644044 644702 644726 1375820 Y Y Y Y Y Y Y Y Y* Y* Y* Y* Y* Y* N Connectors *2 & 3 position MTA-100 Posted Connectors can not mate with MTA-100 connectors with polarizing tabs. 641190 641191 641192 641193 641198 641199 641200 641201 644038 644040 647477 647480 1375820 1744020 Y Y Y Y Y Y Y Y Y* Y* Y* Y* N Y* Connectors *2 & 3 position MTA-100 Posted Connectors can not mate with MTA-100 connectors with polarizing tabs. 6470 08 6470 09 6470 10 6470 11 6470 12 6470 13 6470 14 6470 15 Matrix for .000015 [0.00038] Gold Plated Part Numbers 6470 08 6470 09 6470 10 6470 11 6470 12 6470 13 6470 14 6470 15 Matrix for .000030 [0.00076] Gold Plated Part Numbers Posted Connectors MTA-100 .100 [2.54] Y Y Y Y Y Y Y Y Y* Y* Y* Y* Y* Y* N Y Y Y Y Y Y Y Y Y* Y* Y* Y* Y* Y* N Y Y Y Y Y Y Y Y Y* Y* Y* Y* Y* Y* N Y Y Y Y Y Y Y Y Y* Y* Y* Y* Y* Y* N Y Y Y Y Y Y Y Y Y* Y* Y* Y* Y* Y* N Y Y Y Y Y Y Y Y Y* Y* Y* Y* Y* Y* N Y Y Y Y Y Y Y Y Y* Y* Y* Y* Y* Y* N Posted Connectors Y Y Y Y Y Y Y Y Y* Y* Y* Y* N Y* Y Y Y Y Y Y Y Y Y* Y* Y* Y* N Y* Y Y Y Y Y Y Y Y Y* Y* Y* Y* N Y* Y Y Y Y Y Y Y Y Y* Y* Y* Y* N Y* Y Y Y Y Y Y Y Y Y* Y* Y* Y* N Y* Y Y Y Y Y Y Y Y Y* Y* Y* Y* N Y* Y Y Y Y Y Y Y Y Y* Y* Y* Y* N Y* 19 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-100 IDC Posted Connectors (Wire-to-Wire)--Closed End, Feed-Thru Material and Finish Housing -- UL 94V-2 rated, nylon, see chart for color Contacts -- Copper alloy, post tin or gold plated over nickel (see chart) Closed End Feed-Thru B Dim. B Dim. MTA-100 .100 [2.54] Notes: 1. Mating half visuals - pages 14 & 15. 2. Use feed thru strain relief covers & feed thru dust covers (if needed) - page 16. 3. Approved wire listing - pages 70 thru 74. A Dim. .025 Sq. [0.54] .415 [10.54] .100 Typ. [2.54] .100 Typ. [2.54] Closed End Connector RoHS Equiv. Feed-Thru Connector Part Nos. No. of Circuits .079 [2.00] .303 [7.70] .025 Sq. [0.54] .415 [10.54] .843 [21.40] A Dim. .079 [2.00] .843 [21.40] .303 [7.70] Base Part Numbers Connector Type & Wire Size Standard UL 94V-2, Tin Plated 22 AWG 0.3-0.4 mm2 24 AWG 0.2 mm2 26 AWG 0.12-0.15 mm2 28 AWG 0.08-0.09 mm2 Part Nos. Connector Ordering Information The "Base Part Numbers" Chart at right shows the base part number. Prefixes and suffixes are determined by the number of circuit positions in the connector. For example, the complete part number for a 12-position closed end connector for 22 AWG wire would be: Base number 647000 plus prefix-and-suffix 4- -- -2 The correct ordering number is 4-647000-2 All part numbers are the RoHS equivalent version. Example: No. of Pos. 2 19 Lead Free RoHS Prefix/Suffix 3-647000-2 thru 4-647000-9 647000 647001 647002 647003 32-491 32-491 32-49 32-49 1 647004 647005 647006 647007 --2 --2 --2 --2 1 Standard UL 94V-2, .000030 [0.00076] Gold Plated 22 AWG 647008 0.3-0.4 mm2 24 AWG 647009 0.2 mm2 26 AWG 647010 0.12-0.15 mm2 28 AWG 647011 0.08-0.09 mm2 Standard UL 94V-2, .000015 [0.00038] Gold Plated 22 AWG 647016 0.3-0.4 mm2 24 AWG 647017 0.2 mm2 26 AWG 647018 0.12-0.15 mm2 28 AWG 647019 0.08-0.09 mm2 1 2 32-491 32-49 32-49 1 647012 647013 647014 647015 --2 --2 --2 --2 1 32-491 32-491 32-49 1 647020 647021 647022 647023 --2 --2 --2 --2 32-491 32-491 See page 15 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. 2 and 3 position MTA-100 Posted Connectors (Closed End) can not mate with MTA-100 connectors with polarizing tabs. Parts may be manufactured upon request. Minimums may apply. Contact product engineer or product manager for details. No. of Circuits 2 3 4 5 Dim. A B .300 .227 [7.62] [5.77] .400 .327 [10.16] [8.31] .500 .427 [12.70] [10.85] .600 .527 [15.24] [13.39] No. of Circuits 6 7 8 9 Dim. A B .700 .627 [17.78] [15.93] .800 .727 [20.32] [18.47] .900 .827 [22.86] [21.01] 1.000 .927 [25.40] [23.55] No. of Circuits 10 11 12 13 Dim. A B 1.100 1.027 [27.94] [26.09] 1.200 1.127 [30.48] [28.63] 1.300 1.227 [33.02] [31.17] 1.400 1.327 [35.56] [33.71] No. of Circuits 14 15 16 17 18 Dim. A B 1.500 1.427 [38.10] [36.25] 1.600 1.527 [40.64] [38.79] 1.700 1.627 [43.18] [41.33] 1.800 1.727 [45.72] [43.87] 1.900 1.827 [48.26] [46.41] 2.000 1.927 [50.80] [48.95] Color Coding by Wire Size for UL 94V-2 Connectors 22 AWG -- Red 24 AWG -- White 26 AWG -- Blue 28 AWG -- Green Performance Data Voltage Rating -- 250 VAC Current Rating -- 4 amp max. Low-Level Resistance -- 16 m max. initial Dielectric Withstanding Voltage -- 750 VAC/1 min. Insulation Resistance -- 5000 M min. initial Operating Temperature -- -55C to +105C Contacts -- Copper alloy, post tin or gold plated over nickel 19 Technical Documents Product Specification 108-1050-1 MTA-100 Posted Connector Application Specification 114-1019 MTA-100 Connectors Wire Size AWG mm2 .075 [1.91] .770 [19.55] Replacement IDC Contacts Material and Finish .083 [2.10] .025 [0.64] Part Numbers Tin .000030 Plated [.00076] Gold Plated 22 0.3-0.4 3-647030-1 3-647030-2 24 0.2 3-647031-1 3-647031-2 26 0.12-0.15 3-647032-1 3-647032-2 28 0.8-0.9 3-647033-1 3-647033-2 20 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-100 Flat Headers--Straight and Right-Angle Material and Finish Housing -- UL94V-0 rated, polyester, white Posts -- Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. To determine header overall length (dim. A) multiply .100 x the number of posts. Example: .100 x 10 posts equals 1.000 inch [25.4 mm]. .200 [5.08] A .025 [0.64] Sq. .100 [2.54] .050 Typ. [1.27] Typ. Post No. 1 .535 [13.59] .295 [7.49] Straight Post (.025 [0.64] Square) Right-Angle Post (.025 [0.64] Square) Post No. 1 .200 [5.08] MTA-100 .100 [2.54] A .100 [2.54] .140 [3.56] Ref. .062 [1.57] For mateability options, see matrix on pages 12 and 13. For mating half visuals, see pages 14, 15 and 31. .140 [3.56] Ref. .100 [2.54] .025 [0.64] Sq. .050 [1.27] Typ. .100 [2.54] Typ. .295 [7.49] Header Ordering Information The "Base Part Numbers" Chart at right shows the base part number. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with straight posts would be: Base number 641211 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-641211-0 All part numbers are the RoHS equivalent version. Example: No. of Pos. 2 28 Lead Free RoHS Prefix/Suffix 3-641211-2 thru 5-641211-8 Edge of Board .050/.040 Dia. [1.27/1.02] X = .120 [3.05] min., .240 [6.1] max. when mated with MTA-100 Connector. X = .120 [3.05] min., when mated with CST-100 II Connector. Edge of Board .050/.040 Dia. [1.27/1.02] .100 Typ. [2.54] .120 [3.05] Min. .100 [2.54] Typ. X Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board Note: Consult Product Drawing for details on placing headers onto PC boards. Base Part Numbers Straight Posts Header No. of Posts/ Part Nos. RoHS Equiv. Standard UL94V-0, Tin Plated 640452 2-28 Right-Angle Posts Header No. of Posts/ Part Nos. RoHS Equiv. See page 15 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. 640453 2-28 Standard UL94V-0, .000030 [0.00076] Gold Plated 2-28 641211 641212 32-58 Standard UL94V-0, .000015 [0.00038] Gold Plated 2-28 641122 641123 32-58 2-28 32-58 2-28 32-58 21 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-100 Narrow Flat Headers--Straight and Right-Angle Material and Finish Housing -- UL94V-0 rated, polyester, white Posts -- Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Headers without retentive legs are suitable for breakaway application. 3. 2 or 3 retentive leg(s) per header, depending upon number of positions. 4. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 5. To determine header overall length (dim. A) multiply .100 x the number of posts minus (-) .012. Example: .100 x 10 posts - .012 = .988 inches [25.1 mm]. Straight Post (.025 [0.64] Square) Right-Angle Post (.025 [0.64] Square) .110 [2.79] Ref. .0335 [0.85] MTA-100 .100 [2.54] A .100 [2.54] Typ. .092 [2.34] .092 [2.34] A Straight and Right-Angle Post with Retentive Legs .100 [2.54] Typ. .150 [3.81] Post No. 1 .100 [2.54] Post No. 1 .100 [2.54] .295 [7.49] .505 [12.83] .260 [6.6] For mateability options, see matrix on pages 12 and 13. For mating half visuals, see pages 14, 15 and 31. .025 [0.64] Sq. .044 [1.12] Typ. .110 [2.79] Ref. .025 [0.64] Sq. .044 [1.12] Typ. .110 Ref. [2.79] Connector Ordering Information The "Base Part Numbers" Chart at right shows the base part number. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with straight posts and without retentive legs would be: Base number 644456 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-644456-0 All part numbers are the RoHS equivalent version. Example: No. of Pos. 2 28 Lead Free RoHS Prefix/Suffix 3-644456-2 thru 5-644456-8 .100 [2.54] Typ. Edge of Board .050/.040 Dia. [1.27/1.02] For Straight Leg Headers .037 .002 Dia. [0.94 0.05] For Retentive Leg Headers .100 [2.54] Typ. Edge of Board .050/.040 Dia. [1.27/1.02] For Straight Leg Headers .002 .037 Dia. [0.94 0.05] For Retentive Leg Headers .060 [1.52] Min. .060 [1.52] Min. Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board Note: Consult Product Drawing for details on placing headers onto PC boards. Base Part Numbers Straight Posts Without With Retentive Legs Retentive Legs Header RoHS Header RoHS Part Nos. Equiv. Part Nos. Equiv. Standard UL94V-0, Tin Plated 644456 32-58 Right-Angle Posts Without With Retentive Legs Retentive Legs Header RoHS Header RoHS Part Nos. Equiv. Part Nos. Equiv. See page 15 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. 644695 32-58 644457 644885 644889 32-58 644694 644887 644891 32-58 Standard UL94V-0, .000030 [0.00076] Gold Plated 644884 2-28 644886 2-28 Standard UL94V-0, .000015 [0.00038] Gold Plated 644888 2-28 644890 2-28 2-28 2-28 2-28 2-28 High temperature product available. Please contact Sales Engineer or Product Information Center. 22 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-100 Polarized Headers--Straight and Right-Angle Material and Finish Housing -- UL94V-0 rated, polyester, white Posts -- Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. All posts on retentive leg headers are bent. 4. To determine header overall length (dim. A) multiply .100 x the number of posts. Example: .100 x 10 posts equals 1.000 inch [25.4 mm]. Straight Post (.025 [0.64] Square) Right-Angle Post (.025 [0.64] Square) .225 [5.72] .125 [3.18] .100 [2.54] Typ. .050 [1.27] Typ. Post No. 1 .225 [5.72] .125 [3.18] MTA-100 .100 [2.54] A A .100 [2.54] Typ. .050 [1.27] Typ. Post No. 1 .290 [7.37] .025 [0.64] Sq. .035 [0.89] Min. .295 [7.49] .535 [13.59] .025 [0.64] Sq. .035 Min. [0.89] .295 [7.49] .290 [7.37] For mateability options, see matrix on pages 12 and 13. For mating half visuals, see pages 14, 15 and 31. .140 [3.56] Ref. .100 [2.54] .100 [2.54] .140 Max. [3.56] .140 [3.56] Header Ordering Information The "Base Part Numbers" Chart at right shows the base part number. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with straight posts would be: Base number 641213 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-641213-0 All part numbers are the RoHS equivalent version. Example: No. of Pos. 2 28 Lead Free RoHS Prefix/Suffix 3-641213-2 thru 5-641213-8 .125 [3.18] Ref. 34 34 .135 Ref. [3.43] Retentive Leg .050/.040 Dia. for straight [1.27/1.02] leg headers .037 .002 Dia. for retentive [0.94 0.05] leg headers Retentive Leg .050/.040 Dia. for straight [1.27/1.02] leg headers .037 .002 Dia. for retentive [0.94 0.05] leg headers X = .110 [2.79] min., .160 [4.06] max. when mated with MTA-100 Connector. X = .110 [2.79] min., .120 [3.05] max. when mated with CST-100 II Connector. Edge of Board Edge of Board .130 [3.30] Min. .100 [2.54] Typ. X .100 [2.54] Typ. Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board Note: Consult Product Drawing for details on placing headers onto PC boards. See page 15 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. Base Part Numbers Straight Posts Without With Retentive Legs Retentive Legs Header RoHS Header RoHS Part Nos. Equiv. Part Nos. Equiv. Standard UL94V-0, Tin Plated 640454 2-28 Right-Angle Posts Without With Retentive Legs Retentive Legs Header RoHS Header RoHS Part Nos. Equiv. Part Nos. Equiv. 644876 2-28 640455 641214 641125 2-28 644877 -- -- 2-28 Standard UL94V-0, .000030 [0.00076] Gold Plated 641213 32-58 -- Standard UL94V-0, .000015 [0.00038] Gold Plated 641124 32-58 -- -- -- 32-58 -- -- 32-58 23 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-100 Friction Lock Headers--Straight and Right-Angle Material and Finish Housing -- UL94V-0 rated, polyester, white Posts -- Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel Straight Post (.025 [0.64] Square) Right-Angle Post (.025 [0.64] Square) .225 [5.72] A .025 [0.64] Sq. .295 [7.49] .535 [13.59] .125 [3.18] .225 [5.72] .125 [3.18] A MTA-100 .100 [2.54] Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. All posts on retentive leg headers are bent. 4. To determine header overall length (dim. A) multiply .100 x the number of posts. Example: .100 x 10 posts equals 1.000 inch [25.4 mm]. .040 [1.02] Max. Post No. 1 .025 [0.64] Sq. .100 [2.54] Typ. .050 [1.27] Typ. Post No. 1 .295 [7.49] .040 [1.02] Max. .310 [7.87] .310 [7.87] .100 [2.54] Typ. .050 [1.27] Typ. For mateability options, see matrix on pages 12 and 13. For mating half visuals, see pages 14, 15 and 31. .140 [3.56] Ref. .100 [2.54] .100 [2.54] .140 [3.56] Max. .140 [3.56] Header Ordering Information The "Base Part Numbers" Chart at right shows the base part number. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with straight posts would be: Base number 641215 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-641215-0 All part numbers are the RoHS equivalent version. Example: No. of Pos. 2 28 Standard Prefix/Suffix 641215-2 thru 2-641215-8 Lead Free RoHS Prefix/Suffix 3-641215-2 5-641215-8 .125 [3.18] Ref. 34 34 .135 [3.43] Retentive Leg Retentive Leg Edge of Board .050/.040 Dia. for straight [1.27/1.02] leg headers .037 .002 Dia. for retentive [0.94 0.05] leg headers Edge of Board .050/.040 Dia. for straight [1.27/1.02] leg headers .037 .002 Dia. for retentive [0.94 0.05] leg headers X = .110 [2.79] min., .160 [4.06] max. when mated with MTA-100 Connector. X = .110 [2.79] min., .120 [3.05] max. when mated with CST-100 II Connector. .130 [3.30] Min. .100 [2.54] Typ. X .100 [2.54] Typ. Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board Note: Consult Product Drawing for details on placing headers onto PC boards. See page 15 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. Base Part Numbers Straight Posts Without With Retentive Legs Retentive Legs Header RoHS Header RoHS Part Nos. Equiv. Part Nos. Equiv. Standard UL94V-0, Tin Plated 640456 2-28 Right-Angle Posts Without With Retentive Legs Retentive Legs Header RoHS Header RoHS Part Nos. Equiv. Part Nos. Equiv. 644874 2-28 640457 641216 641127 2-28 644875 -- -- 2-28 Standard UL94V-0, .000030 [0.00076] Gold Plated 641215 32-58 -- Standard UL94V-0, .000015 [0.00038] Gold Plated 641126 32-58 -- -- -- 32-58 -- -- 32-58 24 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Page_Head (Continued) MTA-100 Headers with Retention Peg--Straight Material and Finish Housing -- UL94V-0 rated, thermoplastic, black Posts -- Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel A Friction Lock .113 [2.87] Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. To determine header overall length (dim. A) multiply .100 x the number of posts. Example: .100 x 10 posts equals 1.000 inch [25.4 mm]. .250 [6.35] Post No. 1 .135 [3.43] .125 [3.18] .050 [1.27] .290 .010 [7.37 0.25] .025-.040 [0.64-1.01] MTA-100 .100 [2.54] .347 .010 [8.81 0.25] .550 .010 [13.97 0.25] .025 .001 [0.64 0.03] Square Typ. .100 Typ. [2.54] .070 [1.78] For mateability options, see matrix on pages 12 and 13. For mating half visuals, see pages 14, 15 and 31. Polarized .113 [2.87] Header Ordering Information The "Base Part Numbers" Chart at right shows the base part number. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with straight posts would be: Base number 647609 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-647609-0 All part numbers are the RoHS equivalent version. Example: No. of Pos. 2 3 4 5 6 7 8 9 10 11 12 Standard Prefix/Suffix 647609-2 647609-3 647609-4 647609-5 647609-6 647609-7 647609-8 647609-9 1-647609-0 1-647609-1 1-647609-2 Lead Free RoHS Prefix/Suffix 3-647609-2 3-647609-3 3-647609-4 3-647609-5 3-647609-6 3-647609-7 3-647609-8 3-647609-9 4-647609-0 4-647609-1 4-647609-2 A .250 [6.35] Post No. 1 .290 .010 0.25] .135 [7.37 [3.43] .055 Min. [1.39] .347 .010 .550 .010 [8.81 0.25] [13.97 0.25] .025 .001 [0.64 0.03] Square Typ. .100 Typ. [2.54] .125 [3.18] .050 [1.27] .070 [1.78] .055 [1.40] O .052 .002 [1.32 0.05] .100 Typ. [2.54] .070 Min. [1.78] O .040 .003 [1.02 0.07 ] .090 [2.29] Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board Note: Consult Product Drawing for details on placing headers onto PC boards. Base Part Numbers Friction Lock Header RoHS Part Nos. Equiv. Standard UL94V-0, Tin Plated 647609 32-42 Header Part Nos. Polarized RoHS Equiv. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. 647623 32-42 Standard UL94V-0, .000030 [0.00076] Gold Plated 647626 32-42 647624 Standard UL94V-0, .000015 [0.00038] Gold Plated 647627 32-42 647625 32-42 Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. 32-42 25 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-100 High Profile Headers--Right-Angle Material and Finish Housing -- UL94V-0 rated, thermoplastic, black Posts -- Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel Friction Lock Right-Angle Post (.025 [0.64] Square) Polarized Right-Angle Post (.025 [0.64] Square) A MTA-100 .100 [2.54] Notes: 1. Post(s) can be omitted for keying .250 purposes. Specify the desired [6.35] post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. To determine header overall length (dim. A) multiply .100 x the number of posts. Example: .100 x 10 posts equals 1.000 inch [25.4 mm]. 4. This product can be mounted in the middle of the PC Board as shown in the PCB layout. .250 [6.35] .113 [2.87] .113 [2.87] A .025 [0.64] Sq. Post No. 1 .040 [1.02] Max. .025 [0.64] Sq. .100 [2.54] .050 [1.27] .070 [1.78] .290 [7.37] .112 [2.84] For mateability options, see matrix on pages 12 and 13. For mating half visuals, see pages 14, 15 and 31. .347 [8.81] .290 Post No. 1 [7.37] .347 [8.81] Header Ordering Information The "Base Part Numbers" Chart at right shows the base part number. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with right-angle posts would be: Base number 647630 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-647630-0 All part numbers are the RoHS equivalent version. Example: No. of Pos. 2 3 4 5 6 7 8 9 10 11 12 Lead Free RoHS Prefix/Suffix 3-647630-2 3-647630-3 3-647630-4 3-647630-5 3-647630-6 3-647630-7 3-647630-8 3-647630-9 4-647630-0 4-647630-1 4-647630-2 .100 [2.54] .050 [1.27] .125 [3.18] .112 [2.84] .125 [3.18] .140 [3.56] .100 Typ. [2.54] .040 .003 Dia. [1.02 0.07] Note: Consult Product Drawing for details on placing headers onto PC boards. Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board Base Part Numbers Friction Lock Right-Angle Posts Header RoHS Part Nos. Equiv. Standard UL94V-0, Tin Plated 647630 32-42 Polarized Right-Angle Posts Header RoHS Part Nos. Equiv. 647651 32-42 Standard UL94V-0, .000030 [0.00076] Gold Plated 647629 32-42 647653 Standard UL94V-0, .000015 [0.00038] Gold Plated 647628 32-42 647652 32-42 Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. 32-42 Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. 26 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Page_Head (Continued) MTA-100 Polarized High Temperature Headers--Straight and Right-Angle Material and Finish Housing -- 2-12 Position -- UL94V-0 rated, nylon, black 13-18 Position -- UL94V-0 rated, LCP, black Posts -- Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. To determine header overall length (dim. A) multiply .100 x the number of posts. Example: .100 x 10 posts equals 1.000 inch [25.4 mm]. For use with Infrared Reflow Process Straight Post (.025 [0.64] Square) Maximum Temperature Rating: 2-12 Position: 280C 13-18 Position: 235C Right-Angle Post (.025 [0.64] Square) A MTA-100 .100 [2.54] .250 [6.35] .113 [2.87] A .100 [2.54] .050 [1.27] .250 [6.35] .113 [2.87] .025 [0.64] Sq. .070 [1.78] .025 [0.64] Sq. .100 [2.54] .050 [1.27] .070 [1.78] Post No. 1 .290 [7.37] .550 [13.97] .347 [8.81] .290 Post No. 1 [7.37] .347 [8.81] For mateability options, see matrix on pages 12 and 13. For mating half visuals, see pages 14, 15 and 31. .125 [3.18] .135 [3.43] .112 [2.84] .125 [3.18] .008 [0.20] Min. Thk. Solder Paste In Area Shown Post No. 1 .140 [3.56] Header Ordering Information The "Base Part Numbers" Chart at right shows the base part number. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with straight posts would be: Base number 647047 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-647047-0 All part numbers are the RoHS equivalent version. Example: No. of Pos. 2 12 13 18 Lead Free RoHS Prefix/Suffix 3-647047-2 thru 4-647047-2 NA thru NA .060 [1.52] Pre-Tinned Land Both Sides Typ. .040 [1.02] Pre-Tinned Plated Thru Hole Typ. .100 [2.54] Typ. .300 [7.62] .150 [3.81] Note: Consult Product Drawing for details on placing headers onto PC boards. .0325 [0.826] .065 [1.65] Recommended Mounting Hole Pattern for .062 [1.57] Thick PC Board Base Part Numbers Straight Posts Header RoHS Part Nos. Equiv. Standard UL94V-0, Tin Plated 647047 32-42 Straight Posts (Tube Loaded) Header RoHS Part Nos. Equiv. Right-Angle Posts Header RoHS Part Nos. Equiv. See page 15 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. 647298 32-42 647048 647114 647076 32-42 Standard UL94V-0, .000030 [0.00076] Gold Plated 647109 32-42 647300 Standard UL94V-0, .000015 [0.00038] Gold Plated 647075 32-42 647299 32-42 32-42 32-42 32-42 Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. 27 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-100 Friction Lock High Temperature Headers--Straight and Right-Angle Material and Finish Housing -- 2-12 Position -- UL94V-0 rated, nylon, black 13-18 Position -- UL94V-0 rated, LCP, black Posts -- Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. To determine header overall length (dim. A) multiply .100 x the number of posts. Example: .100 x 10 posts equals 1.000 inch [25.4 mm]. For use with Infrared Reflow Process Straight Post (.025 [0.64] Square) Maximum Temperature Rating: 2-12 Position: 280C 13-18 Position: 235C Right-Angle Post (.025 [0.64] Square) MTA-100 .100 [2.54] .250 [6.35] .250 [6.35] A .025 [0.64] Sq. Post No. 1 .040 [1.02] Max. .113 [2.87] A .025 [0.64] Sq. .113 [2.87] Post No. 1 .040 [1.02] Max. .290 [7.37] .550 [13.97] .347 [8.81] .290 [7.37] .112 [2.84] .347 [8.81] For mateability options, see matrix on pages 12 and 13. For mating half visuals, see pages 14, 15 and 31. .100 [2.54] .050 [1.27] .125 [3.18] .130 [3.30] .100 [2.54] .050 [1.27] .125 [3.18] Header Ordering Information The "Base Part Numbers" Chart at right shows the base part number. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with straight posts would be: Base number 647050 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-647050-0 All part numbers are the RoHS equivalent version. Example: No. of Pos. 2 12 13 18 Standard Prefix/Suffix 647050-2 thru 1-647050-2 1-647050-3 thru 1-647050-8 Lead Free RoHS Prefix/Suffix 3-647050-2 4-647050-2 NA NA .060 [1.52] Pre-Tinned Land Both Sides Typ. .040 [1.02] Pre-Tinned Plated Thru Hole Typ. .100 [2.54] Typ. .008 [0.20] Min. Thk. Solder Paste In Area Shown Post No. 1 .300 [7.62] .150 [3.81] .0325 [0.826] .065 [1.65] Note: Consult Product Drawing for details on placing headers onto PC boards. Recommended Mounting Hole Pattern for .062 [1.57] Thick PC Board Base Part Numbers Straight Posts Header RoHS Part Nos. Equiv. Standard UL94V-0, Tin Plated 647050 32-42 Straight Posts (Tube Loaded) Header RoHS Part Nos. Equiv. Right-Angle Posts Header RoHS Part Nos. Equiv. 647295 32-42 647051 647117 647079 32-42 See page 15 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Standard UL94V-0, .000030 [0.00076] Gold Plated 647116 32-42 647297 Standard UL94V-0, .000015 [0.00038] Gold Plated 647078 32-42 647296 32-42 32-42 32-42 32-42 Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. 28 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-100 Polarized and Friction Lock Surface Mount Headers--Straight Material and Finish Housing -- 2-12 Position -- UL94V-0 rated, nylon, black 13-18 Position -- UL94V-0 rated, LCP, black Posts -- Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. To determine header overall length (dim. A) multiply .100 x the number of posts. Example: .100 x 10 posts equals 1.000 inch [25.4 mm]. For use with Infrared Reflow Process Polarized Header .113 [2.87] .318 [8.08] Ref. .250 [6.35] .318 [8.08] Ref. Maximum Temperature Rating: 2-12 Position: 280C 13-18 Position: 235C Friction Lock Header .113 [2.87] .250 [6.35] MTA-100 .100 [2.54] .025 [0.64] Sq. Post No. 1 .070 [1.78] .025 [0.64] Sq. Post No. 1 .040 [1.02] Max. .290 [7.37] .347 [8.81] .290 [7.37] .347 [8.81] For mateability options, see matrix on pages 12 and 13. For mating half visuals, see pages 14, 15 and 31. .100 [2.54] .050 [1.27] .125 [3.18] .159 [4.04] Typ. .100 [2.54] .050 [1.27] .125 [3.18] .159 [4.04] Header Ordering Information The "Base Part Numbers" Chart at right shows the base part number. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position surface mount polarized header would be: Base number 647106 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-647106-0 All part numbers are the RoHS equivalent version. Example: No. of Pos. 2 12 Lead Free RoHS Prefix/Suffix 3-647106-2 4-647106-2 .060 [1.52] .100 [2.54] Typ. Post No. 1 .235 [5.97] .070 [1.78] Note: Consult Product Drawing for details on placing headers onto PC boards. Recommended PC Board Layout for use with .010 [0.25] Thick Stencil Base Part Numbers Polarized Headers Header RoHS Part Nos. Equiv. Standard UL94V-0, Tin Plated 647106 32-42 Friction Lock Headers Header RoHS Part Nos. Equiv. 647166 32-42 Standard UL94V-0, .000030 [0.00076] Gold Plated 647108 32-42 647168 Standard UL94V-0, .000015 [0.00038] Gold Plated 647107 32-42 647167 32-42 See page 15 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. 32-42 Tape Mount Part Numbers Polarized Headers Header RoHS Part Nos. Equiv. Standard UL94V-0, Tin Plated 647531 32-42 Friction Lock Headers Header RoHS Part Nos. Equiv. 647502 32-42 Standard UL94V-0, .000030 [0.00076] Gold Plated 1744163 Standard UL94V-0, .000015 [0.00038] Gold Plated 647467 32-42 32-42 Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. 29 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-100 Shrouded Headers--Straight and Right-Angle Material and Finish Housing -- UL94V-0 rated, polyester, black Posts -- Copper alloy, tin plated; or .000030 [0.00076] gold over nickel Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Headers with .000015 [0.00038] gold plated post are available upon request. Minimums may apply. 3. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. Straight Post (.025 [0.64] Square) Right-Angle (.025 [0.64] Square) Post No. 1 A Post No. 1 MTA-100 .100 [2.54] A .313 [7.95] .313 [7.95] .410 [10.41] .200 [5.08] .440 [11.18] .025 [0.64] Typ. .410 [10.41] .200 [5.08] For mateability options, see matrix on pages 12 and 13. For mating half visuals, see pages 14 and 15. .025 [0.64] Typ. Header Ordering Information The "Base Part Numbers" Chart at right shows the base part number. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with straight posts and with pegs would be: Base number 644486 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-644486-0 See page 15 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Notes: 1. Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. 2. MTA-100 shrouded headers do not mate with CST-100 II housings. .100 [2.54] .092 [2.34] Typ. Ref. .140 [3.56] .107 [2.72] Ref. .176 [4.47] Ref. .125 [3.18] .100 [2.54] .130 .092 [2.34] [3.30] Typ. Ref. .137 [3.48] Ref. .050 [1.27] Max. .176 [4.47] Ref. Front Bend .206 [5.23] Ref. Polarized Retention Peg .125 [3.18] Min. .300 [7.62] Max. .130 [3.30] Ref. Edge of Board .042 [1.07] .124 [3.15] Edge of Board Rear Bend .050/.040 Dia. [1.27/1.02] .100 [2.54] Typ. .050/.040 Dia. [1.27/1.02] .100 [2.54] Typ. .081/.075 Dia. [2.06/1.91] Note: Consult Product Drawing for details on placing headers onto PC boards. Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board (Solder Side of Board Shown) Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board (Solder Side of Board Shown) Base Part Numbers Straight Posts With Pegs Header Part Nos. RoHS Equiv. Without Pegs Header Part Nos. RoHS Equiv. Right-Angle Posts Without Pegs Only Front Bend Rear Bend Header RoHS Header RoHS Part Nos. Equiv. Part Nos. Equiv. Standard UL94V-0, Tin Plated 644486 22-34 644861 22-34 644488 644489 22-34 644803 -- 22-34 Standard UL94V-0, .000030 [0.00076] Gold Plated 644487 22-34 -- -- 22-34 -- Header Length No. of Circuits 2 3 4 5 Dim. A .284 7.21 .384 9.75 .484 12.29 .584 14.83 Prefix/ Suffix 3- -2 3- -3 3- -4 3- -5 No. of Circuits 6 7 8 9 Dim. A .684 17.37 .784 19.91 .884 22.45 .984 24.99 Prefix/ Suffix 3- -6 3- -7 3- -8 3- -9 No. of Circuits 10 11 12 13 Dim. A 1.084 27.53 1.184 30.07 1.284 32.61 1.384 35.15 Prefix/ Suffix 4- -0 4- -1 4- -2 4- -3 No. of Circuits 14 Dim. A 1.484 37.69 Prefix/ Suffix 4- -4 30 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors .100 [2.54] Centerline CST-100 II Crimp Contacts and Housings Product Facts I Application Tooling Loose Piece Contacts -- Hand Tool No. 58517-3 (408-4064) Strip Contacts -- AMP-O-LECTRIC Model "G" Termination Machine* Applicator No. 567373-3 (Request Catalog 65828) AMP-O-MATIC Stripper-Crimper Machine* Applicator No. 567910-1 or 567827-1 (with CQM) (Request Catalog 65004) AMPOMATOR CLS IIIG Lead Making Machine* (Request Catalog 82659) *Requires applicators. For part numbers, call Technical Support. Low cost wire-to-board interconnections Wide wire range for single contact Tin and gold plated contacts Mates with specified MTA and similar competitive notched headers Plastic latching feature in housing helps prevent contact backout Locking ramps and polarizing tabs are standard For keying purposes use keying plug 641994-1 (page 17) Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 Certified by Canadian Standards (R) Association, File No. LR7189 I I I CST-100 II .100 [2.54] I I I Contacts Part Numbers Tin Plated 15 Au Gold Plated 30 Au Gold Plated 1375819-1 (Strip) 1375819-2 (Strip) 1375819-3 (Strip) 1445336-1 (Loose Piece) 1445336-2 (Loose Piece) 1445336-3 (Loose Piece) I .195 [4.95] .440 [11.17] Material and Finish (RoHS Compliant) Phosphor bronze, pretinned or .000015 [.00038] gold, over nickel .000030 [0.00076] gold over nickel Wire Range -- 22-26 AWG [0.35-0.13 mm2] Max. Ins. Dia. -- .065 [1.65] I .016.002 [.406.051] For mateability options, see matrix on pages 12 and 13. For mating half visuals, see pages 21 thru 29 and 32. See page 15 for an explanation of RoHS lead free equivalents. Housing* Material (RoHS Compliant) UL94V-0 rated, nylon, white No. of Pos. 2 3 4 5 Dim. A .220 5.59 .320 8.13 .420 10.67 .520 13.21 .620 15.75 .720 18.29 .820 20.83 .920 23.37 1.020 25.91 1.120 28.45 1.220 30.99 1.320 33.53 1.420 36.07 1.520 38.61 Part Numbers 1375820-2 1375820-3 1375820-4 1375820-5 1375820-6 1375820-7 1375820-8 1375820-9 1-1375820-0 1-1375820-1 1-1375820-2 1-1375820-3 1-1375820-4 1-1375820-5 No. of Pos. 16 17 18 19 20 21 22 23 24 25 26 27 28 Dim. A 1.620 41.15 1.720 43.69 1.820 46.23 1.920 48.77 2.020 51.31 2.120 53.85 2.220 56.39 2.320 58.93 2.420 61.47 2.520 64.01 2.620 66.55 2.720 69.09 2.820 71.63 Part Numbers 1-1375820-6 1-1375820-7 1-1375820-8 1-1375820-9 2-1375820-0 2-1375820-1 2-1375820-2 2-1375820-3 2-1375820-4 2-1375820-5 2-1375820-6 2-1375820-7 2-1375820-8 *Housings without polarizing tabs may be manufactured upon request. Minimums may apply. Contact product engineering or product manager for details. .260 [6.60] .190 Ref. [4.83] A .510 [12.95] .100 [2.54] Typ. .060 [1.52] Typ. Performance Data Voltage Rating -- 250 vac Current Rating -- 4 amp max. Low-Level Resistance -- 6 m max. initial; 10 m max. final Insulation Resistance -- 1000 M min. initial; 100 M min. final Operating Temperature -- 55 C to 105 C 6 7 8 9 10 11 Technical Documents Product Specification 108-1948 Application Specification 114-13036 Instruction Sheet 408-8493 12 13 14 15 31 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors CST-100 II Shrouded Headers--Straight and Right-Angle Material and Finish Housing -- UL94V-0 rated, polyester, black Posts -- Copper alloy, tin plated; or .000030 [0.00076] gold over nickel Post No. 1 Post No. 1 A A Straight Post (.025 [0.64] Square) Right-Angle (.025 [0.64] Square) Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Headers with .000015 [0.00038] gold plated posts are available upon request. Minimums may apply. 3. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. CST-100 II .100 [2.54] .313 [7.95] .313 [7.95] .280 [7.11] .280 [7.11] .410 [10.41] For mateability options, see matrix on pages 12 and 13. For mating half visuals, see page 31. .036 .520 [0.91] Max. [13.21] .140 [3.56] .100 [2.54] .092 [2.34] Typ. .025 [0.64] Typ. .100 [2.54] .092 [2.34] Ref. .140 [3.56] .107 [2.72] Ref. .125 [3.18] .025 [0.64] Typ. Header Ordering Information The "Base Part Numbers" Chart at right shows the base part number and number of posts available for the described headers. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with straight posts and with pegs would be: Base number 644893 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-644893-0 All part numbers are the RoHS equivalent version. Example: No. of Pos. 2 14 Lead Free RoHS Prefix/Suffix 3-644893-2 thru 4-644893-4 Polarized Retention Peg .125 [3.18] Min. .176 [4.47] Ref. .107 [2.72] Ref. .176 [4.47] Ref. Note: Consult Product Drawing for details on placing headers onto PC boards. Edge of Board .042 [1.07] .124 [3.15] .450 [11.43] Max. Edge of Board .050/.040 Dia. [1.27/1.02] .100 [2.54] Typ. .081/.075 Dia. [2.06/1.91] .050/.040 Dia. [1.27/1.02] .100 [2.54] Typ. Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board (Solder Side of Board Shown) Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board (Solder Side of Board Shown) Base Part Numbers Straight Posts With Pegs Header Part Nos. No. of Posts/ RoHS Equiv. Without Pegs Header Part Nos. No. of Posts/ RoHS Equiv. Right-Angle Posts Without Pegs Only Header Part Nos. No. of Posts/ RoHS Equiv. See page 15 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: CST-100 II shrouded headers only mate with CST-100 II housings. All the MTA-100 headers except the MTA-100 shrouded headers mate with CST-100 II housings. Standard UL94V-0, Tin Plated 644893 32-44 644892 32-44 644894 644898 32-44 Standard UL94V-0, .000030 [0.00076] Gold Plated 644897 32-44 644896 32-44 32-44 Header Length No. of Circuits 2 3 4 Dim. A .284 7.21 .384 9.75 .484 12.29 Prefix/ Suffix 3- -2 3- -3 3- -4 No. of Circuits 5 6 7 Dim. A .584 14.83 .684 17.37 .784 19.91 Prefix/ Suffix 3- -5 3- -6 3- -7 No. of Circuits 8 9 10 Dim. A .884 22.45 .984 24.99 1.084 27.53 Prefix/ Suffix 3- -8 3- -9 4- -0 32 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors .156 [3.96] Centerline MTA-156 IDC Connectors and Headers Product Facts I Connectors and headers for 2 through 24 positions; wire sizes of 18, 20, 22, 24 and 26 AWG [0 .9- 0.12 mm2] Connectors and headers, except shrouded headers, are end-to-end stackable Quad Connectors for higher current rating (page 54) Posted connectors for 2, 3, 4, 6, 9,12,15 and 24 positions Card edge connectors for 3, 6, 9,12,15,18 and 20 through 24 positions Connectors preloaded with IDC contacts All contacts are slotted for insulation displacement (IDC) termination technique Connector styles include both closed end and feedthru, with and without locking ramps and polarizing tabs Molded ribs on housing do not allow reverse mating Contacts are lubricated for fretting corrosion protection Benefits derived from the MTA-156 system include increases quality and ease of handling such as -- I One-step assembly I No wire stripping I No contact damage I Reduced wiring errors I Simpler tooling I Simple maintenance and repair Meets the material requirements of Table 23.1 of UL 1410 Standards for Television Receiver and Video Products (wire-topost connectors only) Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 R I I I MTA-156 .156 [3.96] I I I I I I I I MTA-156 connectors accept discrete and ribbon cable wire sizes ranging from 18 - 26 AWG [0.9- 0.12 mm2] with maximum insulation outside diameter.095 [2.41] for single wire and .070 [1.78] for mass termination of wires. Tin plated solid, fused stranded or stranded (7, 16, and 19 strands) wire with PVC insulation can be used on 18 AWG [0.8 - 0.9 mm2] MTA-156 connectors; 7, 10, and 19 stranded wire on 20 AWG [0.5 - 0.6 mm2 ] MTA-156 connectors; and 7 and 19 stranded wire on 22 - 26 AWG [0.4 - 0.12 mm2] MTA-156 connectors. Only one wire to be terminated into an IDC contact slot. Mass termination of wire provides the lowest applied cost because it drastically reduces the labor content of virtually any cable or harness assembly required. The wire-to-post connector housing material is flame retardant thermoplastic, either UL94V-2 or UL94V-0 rated. A full line of .156 [3.96] centerline headers completes the system. Headers are available with straight or right-angle posts, in flat friction lock and shrouded styles. Headers are available in 2 through 24 positions. Performance Data* Voltage Rating -- 600 vac Current Rating -- 7 amp max. for MTA-156 Connector Low-Level Resistance -- 3.0 m max. initial Dielectric Withstanding Voltage -- 2200 vac/1 min. Insulation Resistance -- 5000 M min. initial Operating Temperature -- 55 C to 105 C *Refer to the Product Specification for additional electrical, mechanical and environmental performance tests and requirements. Technical Documents Product Specification 108-1051 MTA-156 Connectors Application Specifications 114-1020 MTA-156 Connectors, Posted Connectors and Card Edge Connectors Note: Refer to page 70 for approved wire listings. I 114-1032 I Certified by Canadian Standards Association, File No. LR7189 MTA-156 Ribbon Cable Assembly R 33 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors e rs He a d MTA-156 Connector/ Header Mateability Guide Matrix for Tin Plated Part Numbers This matrix has been prepared to assist you, our customer, in defining the correct mating halves for the MTA-156 header and connector combination. Where a "Y" is indicated the combination is a valid mating pair. Where an "N" is indicated the combination is not acceptable for mating. 640426 640427 640428 640429 640430 640431 640432 640433 640434 640435 640472 640473 640474 640475 640476 640477 640478 640479 640480 640481 640595 640599 640600 640601 640602 640604 640605 640606 640607 640608 641301 641302 641303 641304 641305 641306 641307 641308 641309 641310 643817 643818 643819 643820 643821 644082 644461 644462 644463 644464 644465 644466 644467 644468 644469 644470 644471 644472 644501 644502 644566 644567 644569 644570 644572 644783 644791 644860 644878 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y MTA-156 .156 [3.96] Connectors 34 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 6403 84 6403 85 6403 87 6403 88 6403 89 6404 45 6446 11 6446 12 6446 13 6446 14 6446 15 6446 16 6446 17 6447 49 6447 50 6447 51 6447 52 6447 53 6447 54 6447 55 6471 23 6471 24 6471 25 6471 26 6471 27 6471 28 6471 29 6471 30 6472 10 6472 11 6472 12 6472 27 6472 28 6472 29 6472 30 6476 46 6476 48 1744 017 6403 83 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N Y Y Y Y Y Y Y Y Y Y Y N Y N N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N Y Y Y Y Y Y Y Y Y Y Y N Y N N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N Y Y Y Y Y Y Y Y Y Y Y N Y N N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N Y Y Y Y Y Y Y Y Y Y Y N Y N N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N Y Y Y Y Y Y Y Y Y Y Y N Y N N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 Connector/Header Mateability Guide (Continued) This matrix has been prepared to assist you, our customer, in defining the correct mating halves for the MTA-156 header and connector combination. Where a "Y" is indicated the combination is a valid mating pair. Where an "N" is indicated the combination is not acceptable for mating. 02 641217 641218 641219 641220 641221 641222 641223 641224 641225 641226 641227 641228 641229 641230 641231 641232 641233 641234 641235 641236 644460 644662 644663 644687 644718 644720 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N Y N N 6412 07 6412 08 6412 09 6412 10 6446 27 6446 28 6446 29 6446 30 6446 31 6446 32 6446 33 6447 56 6447 57 6447 58 6447 59 6447 60 6447 61 6447 62 6471 31 6471 32 6471 33 6471 34 6471 35 6471 36 6412 6412 6412 03 04 Matrix for .000030 [0.00076] Gold Plated Part Numbers Headers Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N Y N N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N Y N N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y MTA-156 .156 [3.96] 641148 641149 641150 641151 641152 641153 641154 641155 641156 641157 641168 641169 641170 641171 641172 641173 641174 641175 641176 641177 644284 647478 647479 647496 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N Y Connectors 6411 18 6411 19 6411 20 6411 21 6447 63 6447 64 6447 65 6447 66 6447 67 6447 68 6447 69 6471 39 6471 40 6471 41 6471 42 6471 43 6471 44 6476 49 13 14 6411 6411 6411 15 Matrix for .000015 [0.00038] Gold Plated Part Numbers Connectors Headers Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 35 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 IDC Connectors--Closed End Material and Finish Housing -- UL94V-2 rated, nylon, see below for color; or UL94V-0 rated, nylon, black Contacts -- Phosphor bronze, post tin plated, .000030 [0.00076] or .000015 [.00038] post gold plated over nickel Closed End with Locking Ramp .245 [6.22] .100 [2.54] A .097 [2.46] .355 .325 [9.02] [8.26] .230 [5.84] MTA-156 .156 [3.96] Color Coding by Wire Size for UL94V-2 Connectors 26 AWG -- Blue 24 AWG -- White 22 AWG -- Red 20 AWG -- Yellow 18 AWG -- Orange All Wire Sizes in UL94V-0 -- Black .725 [18.42] .050 [1.27] .156 Typ. [3.96] without Polarizing Tabs .100 [2.54] .258 [6.56] Notes: 1. Only connectors with locking ramp and without polarizing tabs mate with posted connectors on page 45. 2. Refer to pages 70 thru 74 for approved wire listing. 3. For strain reliefs and dust covers, see pages 40 and 41. 4. For keying plugs and panel mount end caps, see page 42. 5. Other circuit sizes are available upon request. Minimums may apply. 6. Connector circuits can be molded closed for keying purposes. Minimums may apply. 7. Where no part numbers appear in the chart, parts can be made available upon request. Minimums may apply. 8. To determine connector overall length (Dim. A), multiply .156 x the number of circuits. Example: .156 x 10 circuits equals 1.560 inches [39.62 mm]. with Polarizing Tabs .050 [1.27] For mateability options, see matrix on pages 34 and 35. Mating half visuals for Closed End Connectors with Locking Ramp, see pages 45 thru 48, 50, 52, and 53, (49 and 51 Front Bend Headers Only). Closed End without Locking Ramp .245 [6.22] A .047 [1.19] .355 .325 [9.02] [8.26] .180 [4.57] .725 [18.42] .050 [1.27] .156 Typ. [3.96] without Polarizing Tabs .100 [2.54] .258 [6.56] with Polarizing Tabs .050 [1.27] For mateability options, see matrix on pages 34 and 35. Mating half visuals for Closed End Connectors without Locking Ramp, see pages 46 thru 53. 36 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 IDC Connectors--Closed End (Continued) Connector Ordering Information The "Base Part Numbers" Chart at right shows the base part number and number of circuits available for the described connectors. Prefixes and suffixes are determined by the number of circuit positions in the connector. For example, the complete part number for a 10-position closed end connector with locking ramp and without polarizing tabs for 18 AWG wire would be: Base number 640426 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-640426-0 All part numbers in bold face are the RoHS equivalent version. Example: No. of Pos. 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Lead Free RoHS Prefix/Suffix 3-640426-2 3-640426-3 3-640426-4 3-640426-5 3-640426-6 3-640426-7 3-640426-8 3-640426-9 4-640426-0 4-640426-1 4-640426-2 4-640426-3 4-640426-4 4-640426-5 4-640426-6 4-640426-7 4-640426-8 4-640426-9 5-640426-0 5-640426-1 5-640426-2 5-640426-3 5-640426-4 Base Part Numbers Closed End with Locking Ramp Without Tabs With Tabs Connector Type & Wire Size Connector Part Nos. Connector RoHS Equiv. Connector Part RoHS Nos. Equiv. Closed End without Locking Ramp Without Tabs With Tabs Connector Part Nos. RoHS Equiv. Part Nos. RoHS Equiv. Standard UL94V-2, Tin Plated 18 AWG 640426 0.8-0.9 mm2 20 AWG 640427 0.5-0.6 mm2 22 AWG 640428 0.3-0.4 mm2 24 AWG 640429 0.2 mm2 26 AWG 640430 0.12-0.15 mm2 32-54 32-54 32-54 32-54 32-54 643817 643818 643819 643820 643821 32-54 32-54 32-54 32-54 32-54 640431 640432 640433 640434 640435 32-54 32-54 32-54 32-54 32-54 644461 1 32-44 32-44 32-44 32-44 644462 644463 1 1 6444641 -- MTA-156 .156 [3.96] -- Tape Mounted on Reel UL94V-2, Tin Plated 18 AWG 640472 32-54 0.8-0.9 mm2 20 AWG 640473 32-54 0.5-0.6 mm2 22 AWG 640474 32-54 0.3-0.4 mm2 24 AWG 640475 32-54 0.2 mm2 26 AWG 640476 32-54 0.12-0.15 mm2 644878 -- 644783 -- -- 32-54 -- 32-54 -- -- 640477 640478 640479 640480 640481 32-54 32-54 32-54 32-54 32-54 -- -- 6447911 -- -- -- -- 32-44 -- -- Standard UL94V-2, .000030 [0.00076] Gold Plated 1 18 AWG 641217 32-54 644460 0.8-0.9 mm2 20 AWG 641218 32-54 6446631 0.5-0.6 mm2 22 AWG 641219 32-54 6446621 0.3-0.4 mm2 24 AWG 641220 32-54 -- 0.2 mm2 26 AWG 641221 32-54 -- 0.12-0.15 mm2 Standard UL94V-2, .000015 [0.00038] Gold Plated 1 18 AWG 641148 32-54 644284 0.8-0.9 mm2 20 AWG 641149 32-54 -- 0.5-0.6 mm2 22 AWG 641150 32-54 6474781 0.3-0.4 mm2 24 AWG 641151 32-54 -- 0.2 mm2 26 AWG 641152 32-54 -- 0.12-0.15 mm2 Standard UL94V-0, Tin Plated (Black in color) 1 18 AWG 32-42 644860 0.8-0.9 mm2 22 AWG -- -- 0.3-0.4 mm2 1 32-42 32-42 32-42 -- -- 641222 641223 641224 641225 641226 32-54 32-54 32-54 32-54 32-54 -- -- 644687 -- -- 1 -- -- 32-44 -- -- 32-42 -- 32-42 -- -- 641153 641154 641155 641156 641157 32-54 32-54 32-54 32-54 32-54 -- -- -- -- -- -- -- -- -- -- -- -- -- -- 6445021 644501 1 32-42 32-42 6440821 644566 1 32-42 32-42 Other circuit sizes are available upon request. Minimums may apply. Note: Blocked circuit configurations are available upon request. Contact product engineer or product manager for details. Minimums may apply. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. 37 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 IDC Connectors--Feed-Thru Material and Finish Housing -- UL94V-2 rated, nylon, see below for color; or UL94V-0 rated, nylon, black Contacts -- Phosphor bronze; post tin plated, .000030 [.00076] or .000015 [.00038] post gold plated over nickel .385 .325 [9.78] [8.26] Feed-Thru with Locking Ramp .245 [6.22] .100 [2.54] A .097 [2.46] .230 [5.84] Color Coding by Wire Size for UL94V-2 Connectors 26 AWG -- Blue 24 AWG -- White 22 AWG -- Red 20 AWG -- Yellow 18 AWG -- Orange All Wire Sizes in UL94V-0 -- Black .725 [18.42] .050 [1.27] .156 Typ. [3.96] MTA-156 .156 [3.96] without Polarizing Tabs .100 [2.54] .258 [6.56] Notes: 1. Only connectors with locking ramp and without polarizing tabs mate with posted connectors on page 45. 2. Refer to pages 70 thru 74 for approved wire listing. 3. For strain reliefs and dust covers, see pages 40 and 41. 4. For keying plugs and panel mount end caps, see page 42. 5. Other circuit sizes are available upon request. Minimums may apply. 6. Connector circuits can be molded closed for keying purposes. Minimums may apply. 7. Where no part numbers appear in the chart, parts can be made available upon request. Minimums may apply. 8. To determine connector overall length (Dim. A), multiply .156 x the number of circuits. Example: .156 x 10 circuits equals 1.560 inches [39.62 mm]. .050 [1.27] with Polarizing Tabs For mateability options, see matrix on pages 34 and 35. Mating half visuals for Feed-Thru Connectors with Locking Ramp, see pages 45 thru 48, 50, 52, and 53, (49 and 51 Front Bend Headers Only). Feed-Thru without Locking Ramp .245 [6.22] A .047 [1.19] .325 .385 [9.78] [8.26] .180 [4.57] .725 [18.42] .050 [1.27] .156 Typ. [3.96] without Polarizing Tabs .100 [2.54] .258 [6.56] .050 [1.27] with Polarizing Tabs For mateability options, see matrix on pages 34 and 35. Mating half visuals for Feed-Thru Connectors without Locking Ramp, see pages 46 thru 53. 38 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 IDC Connectors--Feed-Thru (Continued) Connector Ordering Information The "Base Part Numbers" Chart at right shows the base part number and number of circuits available for the described connectors. Prefixes and suffixes are determined by the number of circuit positions in the connector. For example, the complete part number for a 10-position feed-thru connector with locking ramp and without polarizing tabs for 18 AWG wire would be: Base number 640599 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-640599-0 The part numbers in bold face are the RoHS equivalent version. Example: No. of Pos. 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Lead Free RoHS Prefix/Suffix 3-640599-2 3-640599-3 3-640599-4 3-640599-5 3-640599-6 3-640599-7 3-640599-8 3-640599-9 4-640599-0 4-640599-1 4-640599-2 4-640599-3 4-640599-4 4-640599-5 4-640599-6 4-640599-7 4-640599-8 4-640599-9 5-640599-0 5-640599-1 5-640599-2 5-640599-3 5-640599-4 Base Part Numbers Feed-Thru with Locking Ramp Without Tabs With Tabs Connector Type & Wire Size Connector Part Nos. Connector RoHS Equiv. Connector Part RoHS Nos. Equiv. Feed-Thru without Locking Ramp Without Tabs With Tabs Connector Part Nos. RoHS Equiv. Part Nos. RoHS Equiv. Standard UL94V-2, Tin Plated 18 AWG 640599 0.8-0.9 mm2 20 AWG 640600 0.5-0.6 mm2 22 AWG 640601 0.3-0.4 mm2 24 AWG 640602 0.2 mm2 26 AWG 640595 0.12-0.15 mm2 32-54 32-54 32-54 32-54 32-54 644465 1 32-44 32-44 32-44 32-44 -- 640604 640605 640606 640607 640608 32-54 32-54 32-54 32-54 32-54 644469 644470 644471 644472 -- 1 32-44 32-44 32-44 32-44 644466 644467 644468 -- 1 1 1 1 1 1 MTA-156 .156 [3.96] -- Tape Mounted on Reel UL94V-2, Tin Plated 18 AWG 641302 32-54 0.8-0.9 mm2 20 AWG 641303 32-54 0.5-0.6 mm2 22 AWG 641304 32-54 0.3-0.4 mm2 24 AWG 641305 32-54 0.2 mm2 26 AWG 641301 32-54 0.12-0.15 mm2 Standard UL94V-2, .00003 [.00076] Gold Plated 18 AWG 641227 32-54 0.8-0.9 mm2 20 AWG 641228 32-54 0.5-0.6 mm2 22 AWG 641229 32-54 0.3-0.4 mm2 24 AWG 641230 32-54 0.2 mm2 26 AWG 641231 32-54 0.12-0.15 mm2 Standard UL94V-2, .000015 [.00038] Gold Plated 18 AWG 641168 32-54 0.8-0.9 mm2 20 AWG 641169 32-54 0.5-0.6 mm2 22 AWG 641170 32-54 0.3-0.4 mm2 24 AWG 641171 32-54 0.2 mm2 26 AWG 641172 32-54 0.12-0.15 mm2 Standard UL94V-0, Tin Plated 18 AWG -- 0.8-0.9 mm2 22 AWG -- 0.3-0.4 mm2 1 -- -- -- -- -- -- -- -- -- -- 641306 641307 641308 641309 641310 32-54 32-54 32-54 32-54 32-54 -- -- -- -- -- -- -- -- -- -- 644718 -- 1 32-44 -- 641232 641233 641234 641235 641236 32-54 32-54 32-54 32-54 32-54 -- -- -- -- -- -- -- -- -- -- 644720 -- -- 1 32-44 -- -- 647479 -- 1 32-42 -- 641173 641174 641175 641176 641177 32-54 32-54 32-54 32-54 32-54 -- -- -- -- -- -- -- -- -- -- 647496 -- -- 1 32-42 -- -- -- -- -- -- -- -- 644567 1 32-42 32-42 644570 644572 1 32-42 32-42 644569 1 1 Other circuit sizes are available upon request. Minimums may apply. Note: Blocked circuit configurations are available upon request. Contact product engineer or product manager for details. Minimums may apply. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. 39 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 Connector Accessories Closed End Covers Material (RoHS Compliant) Strain Relief Covers -- UL94V-2 rated, nylon, white Dust Covers -- UL94V-0 rated, polyester, white .440 [11.18] .335 [8.51] .440 [11.18] .105 [2.67] Strain Relief Covers Dust Covers Retention Dimple .335 [8.51] .127 [3.23] A A .130 [3.30] Base Part Numbers MTA-156 .156 [3.96] Note: This portion of front locking bar may or may not be present Closed End Strain Relief Dust Covers Covers Cover No. of Cover No. of Part Nos. Circuits Part Nos. Circuits 643067 2-24 640551 2-24 Feed-Thru Covers Material (RoHS Compliant) Strain Relief Covers -- UL94V-2 rated, nylon, white Dust Covers -- UL94V-0 rated, polyester, white Strain Relief Covers Dust Covers Retention Dimple .470 [11.94] .475 [12.07] .127 [3.23] A .130 [3.3] .325 [8.26] A Base Part Numbers Feed-Thru Strain Relief Dust Covers Covers Cover No. of Cover No. of Part Nos. Circuits Part Nos. Circuits 643071 2-24 640643 2-24 Cover Ordering Information The "Base Part Numbers" Chart at right shows the base part number and number of circuits available for the described cover. Prefixes and suffixes are determined by the number of circuit positions in the cover. For example, the complete part number for a 10-position closed-end strain relief cover would be: Base number 643067 plus prefix-and-suffix 1- -- -0 The correct ordering number is 1-643067-0 40 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Note: This portion of front locking bar may or may not be present Cover Length No. of Circuits 2 3 4 5 6 7 8 9 Dim. A .312 7.92 .468 11.89 .624 15.85 .780 19.81 .936 23.77 1.092 27.74 1.248 31.7 1.404 35.66 Prefix/ Suffix -2 -3 -4 -5 -6 -7 -8 -9 No. of Circuits 10 11 12 13 14 15 16 17 Dim. A 1.560 39.62 1.716 43.59 1.872 47.55 2.028 51.51 2.184 55.47 2.340 59.44 2.496 63.4 2.652 67.36 Prefix/ Suffix 1- -0 1- -1 1- -2 1- -3 1- -4 1- -5 1- -6 1- -7 No. of Circuits 18 19 20 21 22 23 24 Dim. A 2.808 71.32 2.964 75.29 3.120 79.25 3.276 83.21 3.432 87.17 3.588 91.14 3.744 95.1 Prefix/ Suffix 1- -8 1- -9 2- -0 2- -1 2- -2 2- -3 2- -4 Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 Connector Accessories (Continued) Replacement IDC Contacts Material and Finish Contacts -- Phosphor bronze, post tin plated; .000030 [0.00076] or .000015 [0.00038] post gold plated over nickel Note: Tyco Electronics does not recommend terminating an MTA contact more than one time. Use replacement contacts when required for field repairs or wire changes. .637 [16.18] .125 [3.18] Wire Size AWG mm2 18 20 22 24 26 0.8-0.9 0.5-0.6 0.3-0.4 0.2 0.12-0.15 Tin Plated 640631-3 640632-3 640633-3 640634-3 640635-3 Part Numbers .000030 [0.00076] Gold Plated 641143-4 641144-4 641145-4 641146-4 641147-4 .000015 [0.00038] Gold Plated 641143-3 641144-3 641145-3 641146-3 641147-3 MTA-156 .156 [3.96] Crimp Snap-in Contacts .580 [14.73] Material and Finish Contacts -- Phosphor bronze, tin plated .105 [2.67] Wire Size AWG mm2 26-22 .12-0.3 22-18 0.3-0.9 Part Nos. Loose Piece* 640557-3 640559-3 Strip** 640556-3 640558-3 .110 [2.79] .165 Max. [4.19] **Hand Tool No. 59837-1 (408-6528) **AMP-O-LECTRIC Model "G" Termination Machine (Request Catalog 65828) Note: Requires applicator. For part number, call Technical Support. Special applications for crimp snap-in contacts are: 1. Double wire per contact 2. Coax or shielded wire 3. Mixed wire size in same connector Note: Only one crimp snap-in contact per connector. 41 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 Connector Accessories (Continued) Keying Plugs Material (RoHS Compliant) UL94V-2 rated, nylon, natural color Note: Removal of contact is not necessary when using keying plug. .066 [1.68] Loose Piece Part No. 640629-1 (Flush) Used with keyed headers .300 [7.62] .065 [1.65] On Carrier Strip Part No. 641623-1 (Flush) (10 per strip) .500 [12.70] Ref. .051 [1.30] Flush .085 [2.16] 2.525 [64.14] Ref. MTA-156 .156 [3.96] Part No. 640630-1 (Long Nose) Used with staked post .300 [7.62] .051 [1.30] .375 [9.52] .300 [7.62] Ref. .125 [3.18] .065 [1.65] .066 [1.68] Long Nose .070 Dia. [1.78] Panel Mount End Caps Part No. 641440-1 Part No. 641533-1 (2-position only) Material (RoHS Compliant) UL94V-2 rated, nylon, black Notes: 1. Both left-hand and right-hand end caps are attached by a connecting tab. This tab must be broken off prior to installing on connector. 2. For best results attach panel mount end caps to the MTA-156 (IDC) connectors shown on pages 36 thru 39. While not preferred, panel mount end caps can be attached to MTA-156 (IDC) posted connector on page 45. No. of Pos. 3 4 6 9 12 15 24 Dim. A .736 18.69 .892 22.66 1.204 30.58 1.672 42.47 2.140 54.36 2.608 66.24 4.012 101.9 .550 .410 [13.97] [10.41] .564 [14.33] .440 [11.18] .520 [13.2] .440 [11.18] .520 [13.2] 3- thru 24-Position 641440-1 See Note 1 Two-Position Only 641533-1 A .578 [14.7] .453 [11.5] .010 [.254] Max. R. Typ. at Min. Tolerance Cutout .453 [11.5] .010 [.254] Max. R. Typ. at Min. Tolerance Cutout Recommended Panel Cutout (Recommended Panel Thickness .062 [1.57] to .067 [1.70] max.) 42 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors 6414 35 6414 36 6414 37 6414 38 6414 39 6415 22 6415 23 6415 24 6415 25 6415 26 Posted Connectors MTA-156 Posted Connector/Connector Mateability Guide Matrix for Tin Plated Part Numbers This matrix has been prepared to assist you, our customer, in defining the correct mating halves for the MTA-156 posted connector and connector combination. Where a "Y" is indicated the combination is a valid mating pair. Where an "N" is indicated the combination is not acceptable for mating. 640426 640427 640428 640429 640430 640431 640432 640433 640434 640435 640472 640473 640474 640475 640476 640477 640478 640479 640480 640481 640595 640599 640600 640601 640602 640604 640605 640606 640607 640608 641301 641302 641303 641304 641305 641306 641307 641308 641309 641310 643817 643818 643819 643820 643821 644082 644461 644462 644463 644464 644465 644466 644467 644468 644469 644470 644471 644472 644501 644502 644566 644567 644569 644570 644572 644783 644791 644860 644878 Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N Y N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N Y N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N Y N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N Y N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N Y N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N Y N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N Y N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N Y N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N Y N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N Y N MTA-156 .156 [3.96] Connectors 43 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 Posted Connector/Connector Mateability Guide (Continued) This matrix has been prepared to assist you, our customer, in defining the correct mating halves for the MTA-156 posted connector and connector combination. Where a "Y" is indicated the combination is a valid mating pair. Where an "N" is indicated the combination is not acceptable for mating. 641217 641218 641219 641220 641221 641222 641223 641224 641225 641226 641227 641228 641229 641230 641231 641232 641233 641234 641235 641236 644460 644662 644663 644687 644718 644720 Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N N N N N N N MTA-156 .156 [3.96] Connectors 641148 641149 641150 641151 641152 641153 641154 641155 641156 641157 641168 641169 641170 641171 641172 641173 641174 641175 641176 641177 644284 647478 647479 647496 YYYY YYYY YYYY Y Y N N N N N Y Y Y Y Y N N N N N N N N N Y Y N N N N N Y Y Y Y Y N N N N N N N N N Y Y N N N N N Y Y Y Y Y N N N N N N N N N Y Y N N N N N Y Y Y Y Y N N N N N N N N N 44 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 Connectors 6439 95 6474 76 6474 81 6474 97 Matrix for .000015 [0.00038] Gold Plated Part Numbers Posted Connectors 6448 07 6448 09 6448 12 6448 14 Matrix for .000030 [0.00076] Gold Plated Part Numbers Posted Connectors Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N N N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N N N N N N N Y Y Y Y Y N N N N N Y Y Y Y Y N N N N N N N N N N N MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 IDC Posted Connectors (Wire-to-Wire)--Closed End, Feed-Thru Material and Finish Housing -- UL 94V-2 rated, nylon, see chart for color Contacts -- Copper alloy, post tin or .000030 [.00076] gold plated over nickel Closed End 4 Feed-Thru B Dim. B Dim. 1 2 3 A Dim. .010 [ 0.25 ] .105 [2.67] .156 [3.96] .370 [9.4] .045 [1.14] Sq. 1.010 [25.65] .487 .355 [12.37] [9.02] Ref. A Dim. .010 [ 0.25 ] .156 [3.96] .105 [2.67] 1.010 [25.65] .487 .385 [12.37] [9.78] Ref. .370 [9.4] .045 [1.14] Sq. MTA-156 .156 [3.96] Notes: 1. Mating half visuals - pages 36 thru 39. 2. Strain relief & dust covers - pages 40 & 41. 3. Approved wire listing - page 70. Base Part Numbers Closed End Connector1 Connector Type & Wire Size Standard UL 94V-2, Tin Plated 18 AWG 0.8-0.9 mm2 20 AWG 0.5-0.6 mm2 22 AWG 0.3-0.4 mm2 24 AWG 0.2 mm2 26 AWG 0.12-0.15 mm2 Part Nos. RoHS Equiv. Feed-Thru Connector1 Part Nos. RoHS Equiv. Connector Ordering Information The "Base Part Numbers" Chart at right shows the base part number and number of circuits available for the described connectors. Prefixes and suffixes are determined by the number of circuit positions in the connector. For example, the complete part number for a 12-position closed end connector for 18 AWG wire would be: Base number 641435 plus prefix-and-suffix 4- -- -2 The correct ordering number is 4-641435-2 See page 15 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. 641435 641436 641437 641438 641439 32, 33, 34, 36, 39, 42, 45, 54 32, 33, 34, 36, 39, 42, 45, 54 32, 33, 34, 36, 39, 42, 45, 54 32, 33, 34, 36, 39, 42, 45, 54 32, 33, 34, 36, 39, 42, 45, 54 641522 641523 641524 641525 641526 32, 33, 34, 36, 39, 42, 45, 54 32, 33, 34, 36, 39, 42, 45, 54 32, 33, 34, 36, 39, 42, 45, 54 32, 33, 34, 36, 39, 42, 45, 54 32, 33, 34, 36, 39, 42, 45, 54 Standard UL 94V-2, .000030 [0.00076] Gold Plated 18 AWG 644807 32, 33, 34, 36, 39, 42, 45, 54 0.8-0.9 mm2 20 AWG 2 -- -- 0.5-0.6 mm2 22 AWG 644809 32, 33, 34, 36, 39, 42, 45, 54 0.3-0.4 mm2 24 AWG --2 -- 0.2 mm2 26 AWG --2 -- 0.12-0.15 mm2 Standard UL 94V-2, .000015 [0.00038] Gold Plated 18 AWG 647476 32, 33, 34, 36, 39, 42, 45, 54 0.8-0.9 mm2 22 AWG 643995 32, 33, 34, 36, 39, 42, 45, 54 0.3-0.4 mm2 1 644812 -- 2 32, 33, 34, 36, 39, 42, 45, 54 -- 32, 33, 34, 36, 39, 42, 45, 54 -- -- 644814 --2 --2 647481 647497 32, 33, 34, 36, 39, 42, 45, 54 32, 33, 34, 36, 39, 42, 45, 54 2 Color Coding by Wire Size for UL 94V-2 Connectors 18 AWG --Orange 20 AWG -- Yellow 22 AWG -- Red 24 AWG -- White 26 AWG -- Blue MTA-156 Posted Connectors (Closed End and Feed-Thru) will Only mate with MTA-156 connectors with locking ramp and without polarizing tabs. They will NOT mate with MTA-156 Quad Connectors. Parts can be made available upon request. Minimums may apply. No. of Circuits 2 3 4 6 Dim. A .468 11.89 .624 15.85 .780 19.81 1.092 27.74 B .316 8.03 .472 11.99 .628 15.95 .940 23.88 Suffix -2 -3 -4 -6 No. of Circuits 9 12 15 24 Dim. A 1.560 39.62 2.028 51.51 2.496 63.40 3.900 99.06 B 1.408 35.76 1.876 47.65 2.344 59.54 3.748 95.20 Prefix/ Suffix -9 112-2 -5 -4 Performance Data Voltage Rating -- 600 VAC Current Rating -- 7 amp max. Low-Level Resistance -- 7 m max. initial Dielectric Withstanding Voltage -- 1500 VAC/1 min. Insulation Resistance -- 5000 M min. initial Operating Temperature -- -55 C to 105 C Technical Documents Product Specification 108-1065 MTA-156 Posted Connector Application Specification 114-1020 MTA-156 Connectors, Posted Connectors and Card Edge Connectors Replacement IDC Contacts Material and Finish Contacts -- Copper alloy, post tin .126 plated over nickel [3.20] .045 [1.14] Sq. .840 [21.34] .100 [2.54] AWG 18 20 22 24 26 Wire Size mm2 0.8-0.9 0.5-0.6 0.3-0.4 0.2 0.12-0.15 Part Numbers 3-641425-1 3-641426-1 3-641427-1 3-641428-1 3-641429-1 45 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 Flat Headers--Straight Material and Finish Housing -- UL94V-0 rated, polyester, white Posts -- Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. .125 [3.18] solder tail lengths are for .062 [1.57] thick printed circuit boards and .175 [4.45] solder tail lengths are for .093-.125 [2.363.18] thick printed circuit boards. 4. To determine header overall length (Dim. A), multiply .156 x the number of posts. Example: .156 x 10 posts equals 1.560 inches [39.62 mm]. .250 [6.35] .125 [3.18] A .045 [1.14] .078 [1.98] Typ. .156 [3.96] Typ. Post No. 1 .450 Ref. [11.43] MTA-156 .156 [3.96] .125 [3.18] .140 Min. [3.56] Edge of Board Solder tail Length (See Chart) For mateability options, see matrix on pages 34, 35, 54 and 58. For mating half visuals, see pages 36 thru 39, 55, 60 and 62. .156 [3.96] Header Ordering Information The "Base Part Numbers" Chart at right shows the base part number and number of posts available for the described headers. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with square posts and a .125 [3.18] solder tail length would be: Base number 640383 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-640383-0 The part numbers in bold face are the RoHS equivalent version. Example: No. of Pos. 2 24 Lead Free RoHS Prefix/Suffix 3-640383-2 thru 5-640383-4 Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board PC Board Hole Diameters Square Round Post Post .080/.070 .070/.060 [2.03/1.78] [1.78/1.52] Note: Consult Product Drawing for details on placing headers onto PC boards. Base Part Numbers Square Posts .125 [3.18] .175 [4.45] Solder tail Solder tail Header RoHS Header RoHS Part Nos. Equiv. Part Nos. Equiv. Standard UL94V-0, Tin Plated 640383 2-24 Round Posts .125 [3.18] Solder tail Header RoHS Part Nos. Equiv. .175 [4.45] Solder tail Header RoHS Part Nos. Equiv. 644749 2-24 640384 641203 641114 2-24 644750 644757 644764 2-24 Standard UL94V-0, .000030 [0.00076] Gold Plated 641202 32-54 644756 32-54 Standard UL94V-0, .000015 [0.00038] Gold Plated 641113 32-54 644763 32-54 32-54 32-54 32-54 32-54 See page 15 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. 46 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 Flat Headers--Right-Angle Material and Finish Housing -- UL94V-0 rated, polyester, white Posts -- Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. .125 [3.18] solder tail lengths are for .062 [1.57] thick printed circuit boards and .175 [4.45] solder tail lengths are for .093-.125 [2.363.18] thick printed circuit boards. 4. To determine header overall length (Dim. A), multiply .156 x the number of posts. Example: .156 x 10 posts equals 1.560 inches [39.62 mm]. .045 [1.14] Sq. .156 [3.96] Typ. .078 [1.98] Typ. Post No. 1 .125 [3.18] A A .250 [6.35] .125 [3.18] .100 [2.54] MTA-156 .156 [3.96] .390 [9.91] Solder tail Length (See Chart) X .156 [3.96] .080/.070 [2.03/1.78] .390 .015 [9.91 0.38] Edge of Board For mateability options, see matrix on pages 34, 35, 54 and 58. For mating half visuals, see pages 36 thru 39, 55, 60 and 62. Header Ordering Information The "Base Part Numbers" Chart at right shows the base part number and number of posts available for the described headers. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with square posts and a .125 [3.18] solder tail length would be: Base number 641204 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-641204-0 The part numbers in bold face are the RoHS equivalent version. Example: No. of Pos. 2 24 Lead Free RoHS Prefix/Suffix 3-641204-2 thru 5-641204-4 Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board .125 [3.18] X = .140 [3.56] Min., .430 [10.92] Max. when mated with MTA Connector. X = .140 [3.56] Min. when mated with SL-156 Wire-to-Board Connector. 16 Retentive Leg Edge of Board Y O .063 .002 Typ. [1.60 0.05] Note: Consult Product Drawing for details on placing headers onto PC boards. .156 Typ. [3.96] Recommended Mounting Hole Pattern for .063 [1.60] Thk. PC Board for Retentive Leg Header Y = .140 [3.56] Min., .430 [10.92] Max. when mated with MTA Connector. Base Part Numbers Retentive Leg Header RoHS Part Nos. Equiv. Standard UL94V-0, Tin Plated 647646 2-12 Square Posts .125 [3.18] Solder tail Header RoHS Part Nos. Equiv. .175 [4.45] Solder tail Header RoHS Part Nos. Equiv. 640385 2-24 644751 644758 644765 2-24 Standard UL94V-0, .000030 [0.00076] Gold Plated -- -- 641204 Standard UL94V-0, .000015 [0.00038] Gold Plated -- -- 641115 32-54 32-54 32-54 32-54 See page 15 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. 47 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 Friction Lock Headers--Straight Material and Finish Housing -- UL94V-0 rated, polyester, white Posts -- Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. .125 [3.18] solder tail lengths are for .062 [1.57] thick printed circuit boards and .175 [4.45] solder tail lengths are for .093-.125 [2.363.18] thick printed circuit boards. 4. To determine header overall length (Dim. A), multiply .156 x the number of posts. Example: .156 x 10 posts equals 1.560 inches [39.62 mm]. A .045 [1.14] .156 Typ. [3.96] .078 Typ. [1.98] Post No. 1 .450 Ref. [11.43] .425 [10.8] .125 [3.18] Y = .068 [1.73] Max. 2-8 position tin plated and 2-24 position gold plated headers. Y = .073 [1.85] 9-24 position tin plated headers. Y .180 [4.57] .300 [7.62] MTA-156 .156 [3.96] .175 Min. [4.45] Edge of Board Solder tail Length (See Chart) .068 [1.7] For mateability options, see matrix on pages 34, 35, 54 and 58. For mating half visuals, use connectors with a locking ramp for polarization/retention purposes, see pages 36 thru 39, 55, 60 and 62. For polarizing purposes only use connectors without a locking ramp. See pages 36 thru 39, 55, 60 and 62. .156 [3.96] .400 [10.16] Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board Header Ordering Information The "Base Part Numbers" Chart at right shows the base part number and number of posts available for the described headers. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with square posts and a .125 [3.18] solder tail length would be: Base number 641208 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-641208-0 The part numbers in bold face are the RoHS equivalent version. Example: No. of Pos. 2 24 Standard Prefix/Suffix 641208-2 thru 2-641208-4 Lead Free RoHS Prefix/Suffix 3-641208-2 5-641208-4 PC Board Hole Diameters Square Round Post Post .080/.070 .070/.060 [2.03/1.78] [1.78/1.52] 16 3 Retentive Leg Note: Consult Product Drawing for details on placing headers onto PC boards. Base Part Numbers Retentive Leg Header RoHS Part Nos. Equiv. Square Posts .125 [3.18] Solder tail Header RoHS Part Nos. Equiv. .175 [4.45] Solder tail Header RoHS Part Nos. Equiv. Round Posts .125 [3.18] .175 [4.45] Solder tail Solder tail Header RoHS Header RoHS Part Nos. Equiv. Part Nos. Equiv. Standard UL94V-0, Tin Plated 1744017 2-12 640445 2-24 644752 644759 644766 2-24 640388 641209 641120 2-24 644753 644760 644767 2-24 Standard UL94V-0, .000030 [0.00076] Gold Plated -- -- 641208 32-54 Standard UL94V-0, .000015 [0.00038] Gold Plated -- -- 641119 32-54 32-54 32-54 32-54 32-54 32-54 32-54 Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) and tube loaded product are available upon request. Please contact product engineer or product manager for details. See page 15 for an explanation of RoHS lead free equivalents. 48 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 Friction Lock Headers--Right-Angle Material and Finish Housing -- UL94V-0 rated, polyester, white Posts -- Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. .125 [3.18] solder tail lengths are for .062 [1.57] thick printed circuit boards and .175 [4.45] solder tail lengths are for .093-.125 [2.36-3.18] thick printed circuit boards. 4. To determine header overall length (Dim. A), multiply .156 x the number of posts. Example: .156 x 10 posts equals 1.560 inches [39.62 mm]. .180 [4.57] .300 [7.62] Y = .068 [1.73] Max. 2-8 position tin plated and 2-24 position gold plated headers. Y = .073 [1.85] 9-24 position tin plated headers. A .045 [1.14] Sq. .156 Typ. [3.96] .078 [1.98] Typ. Y Y MTA-156 .156 [3.96] Post No. 1 .450 [11.43] .425 [10.8] .425 [10.8] For mateability options, see matrix on pages 34, 35, 54 and 58. When using Front Bend Headers -- for mating half visuals use connectors with a locking ramp for polarization/ retention purposes. When using Rear Bend Headers -- for mating half visuals use connectors without a locking ramp. For polarization purposes only see pages 36 thru 39, 55, 60 and 62. .125 [3.18] .212 [5.38] X Solder tail Length (See Chart) .157 [3.99] Edge of Board Front Bend Rear Bend X = .500 [12.7] Min., .650 [16.51] Max., when mated with MTA Connector. X = .500 [12.7] Min., when mated with SL-156 Connector. .156 [3.96] X = .325 [8.26] Min., .400 [10.16] Max., when mated with MTA Connector. .080/.070 X = .325 [8.26] Min., .345 [8.76] [2.03/1.78] Max., when mated with SL-156 Connector. Header Ordering Information The "Base Part Numbers" Chart at right shows the base part number and number of posts available for the described headers. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with square posts, front bend, and a .125 [3.18] solder tail length would be: Base number 641210 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-641210-0 The part numbers in bold face are the RoHS equivalent version. Example: No. of Pos. 2 24 Standard Prefix/Suffix 641210-2 thru 2-641210-4 Lead Free RoHS Prefix/Suffix 3-641210-2 5-641210-4 Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board Note: Consult Product Drawing for details on placing headers onto PC boards. Base Part Numbers Square Posts Front Bend .125 [3.18] Solder tail Header RoHS Part Nos. Equiv. Standard UL94V-0, Tin Plated 640389 2-24 .175 [4.45] Solder tail Header RoHS Part Nos. Equiv. .125 [3.18] Solder tail Header RoHS Part Nos. Equiv. Rear Bend .175 [4.45] Solder tail Header RoHS Part Nos. Equiv. 644754 2-24 640387 641207 641118 2-24 644755 644762 644769 2-24 Standard UL94V-0, .000030 [0.00076] Gold Plated 641210 32-54 644761 32-54 Standard UL94V-0, .000015 [0.00038] Gold Plated 641121 32-54 644768 32-54 32-54 32-54 32-54 32-54 Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. See page 15 for an explanation of RoHS lead free equivalents. 49 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 Polarized Lock Headers--Straight Material and Finish Housing -- UL94V-0 rated, polyester, white Posts -- Copper alloy, tin plated or .000030 [0.00076] gold over nickel Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Peg holes are not required in PC Boards when headers without pegs are used. 3. One peg only on a 2 position header, other position sizes have two pegs. 4. Headers with .00015 [0.00038] gold plated post are available upon request. Minimums may apply. 5. To determine header overall length (Dim. A), multiply .156 x the number of posts. Example: .156 x 10 posts equals 1.560 inches [39.62 mm]. A .156 [3.96] Typ. .076 [1.93] .210 [5.33] 90 Ref. Typ. Retention Tabs 4 Plc. Polarized Retention Peg .045 [1.14] Post No. 1 .125 [3.18] .450 [11.43] .100 [2.54] .545 [13.84] .073 [1.85] MTA-156 .156 [3.96] For mateability options, see matrix on pages 34, 35, 54 and 58. For mating half visuals, use connectors with a locking ramp for polarization/retention purposes, see pages 36 thru 39, 55, 60 and 62. For polarizing purposes only use connectors without a locking ramp. See pages 36 thru 39, 60 and 62. Polarized Retention Peg Peg Hole .066/.062 Dia. [1.68/1.57] .125 [3.18] .425 [10.80] Edge of Board .225 Min. [5.72] .167 [4.24] .156 [3.96] .078 [1.98] PC Board Hole Diameters Square Round Post Post .069/.065 .054/.050 [1.75/1.65] [1.37/1.27] Header Ordering Information The "Base Part Numbers" Chart at right shows the base part number and number of posts available for the described headers. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with square posts with pegs would be: Base number 644615 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-644615-0 The part numbers in bold face are the RoHS equivalent version. Example: No. of Pos. 2 18 Lead Free RoHS Prefix/Suffix 3-644615-2 thru 4-644615-8 Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board Note: Consult Product Drawing for details on placing headers onto PC boards. Base Part Numbers Square Posts Without Pegs With Pegs Header RoHS Header RoHS Part Nos. Equiv. Part Nos. Equiv. Standard UL94V-0, Tin Plated 644611 32-48 Round Posts Without Pegs Header RoHS Part Nos. Equiv. With Pegs Header RoHS Part Nos. Equiv. 644615 32-48 644612 644628 32-48 644616 644632 32-48 Standard UL94V-0, .000030 [0.00076] Gold Plated 644627 32-48 644631 32-48 32-48 32-48 Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. See page 15 for an explanation of RoHS lead free equivalents. 50 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 Polarized Lock Headers--Right-Angle Material and Finish Housing -- UL94V-0 rated, polyester, white Posts -- Copper alloy, tin plated or .000030 [0.00076] gold over nickel Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Peg holes are not required in PC Boards when headers without pegs are used. 3. One peg only on a 2 position header, other position sizes have two pegs. 4. Headers with .00015 [0.00038] gold plated post are available upon request. Minimums may apply. 5. To determine header overall length (Dim. A), multiply .156 x the number of posts. Example: .156 x 10 posts equals 1.560 inches [39.62 mm]. A .156 Typ. [3.96] .076 [1.93] Typ. .100 [2.54] .045 Sq. [1.14] Post No. 1 .125 [3.18] .205 [5.21] Typ. .125 [3.18] .425 [10.80] .125 [3.18] Rear Bend Rear Bend X = .500 [12.7] Min., .700 [17.78] Max., when mated with MTA Connector. X = .500 [12.7] Min., when mated with SL-156 Connector. .450 [11.43] .545 [13.84] .200 [5.08] Typ. 90 Ref. Typ. Retention Tabs 4 Plc. Polarized Retention Peg .210 [5.33] Typ. Ref. .073 [1.85] Typ. MTA-156 .156 [3.96] For mateability options, see matrix on pages 34, 35, 54 and 58. For mating half visuals, use only connectors with a locking ramp for polarization/retention purposes, see pages 36 thru 39, 55, 60 and 62. For polarizing purposes only use connectors without a locking ramp. See pages 36 thru 39, 60 and 62. Front Bend Front Bend Reg. Hole .066/.062 Dia. [1.68/1.57] x .239 [6.07] .156 [3.96] Edge of Board X = .350 [8.89] Min., .825 [20.96] Max., when mated with MTA Connector. X = .350 [8.89] Min. when mated with SL-156 Connector. .069/.065 [1.75/1.65] .078 [1.98] Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board Header Ordering Information The "Base Part Numbers" Chart at right shows the base part number and number of posts available for the described headers. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with front bend and with pegs would be: Base number 644617 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-644617-0 The part numbers in bold face are the RoHS equivalent version. Example: No. of Pos. 2 18 Lead Free RoHS Prefix/Suffix 3-644617-2 thru 4-644617-8 Note: Consult Product Drawing for details on placing headers onto PC boards. Base Part Numbers Square Posts Front Bend Without Pegs Header RoHS Part Nos. Equiv. Standard UL94V-0, Tin Plated 644613 32-48 With Pegs Header RoHS Part Nos. Equiv. Rear Bend Without Pegs Header RoHS Part Nos. Equiv. 644617 32-48 644614 644630 32-48 Standard UL94V-0, .000030 [0.00076] Gold Plated 644629 32-48 644633 32-48 32-48 Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. See page 15 for an explanation of RoHS lead free equivalents. 51 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 Friction Lock High Temperature Headers--Straight Material and Finish Housing -- UL94V-0 rated, nylon, black Posts -- Copper alloy, tin plated, .000015 [0.00038] gold over nickel Temperature-- Maximum Temperature Rating: 280C Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin-lead on the solder tail. 3. Headers with straight and right-angle square posts are available upon request. Minimums may apply. 4. To determine header overall length (Dim. A), multiply .156 x the number of posts. Example: .156 x 10 posts equals 1.560 inches [39.62 mm]. .076 .003 [1.93 0.08] 2 Plcs. Mating End A .156 Typ. [3.96] .005 .073 + .010 - yp.T +0.13 -025 ] . For use with Infrared Reflow Process O .045 .001 Ref. [1.14 0.03] .210 Ref. [5.33] p.Ty 15 [ .8 Post No. 1 .125 [3.18] .700 .010 025 ] . 778 1. [ .450 Ref. [11.43] 1843. [ .545 .010 0.25 MTA-156 .156 [3.96] ] For mateability options, see matrix on pages 34, 35, 54 and 58. For mating half visuals, use connectors with a locking ramp for polarization/retention purposes, see pages 36 thru 39, 55, 60 and 62. For polarizing purposes only use connectors without a locking ramp. See pages 36 thru 39, 60 and 62. Solder tail .125 .010 025 ] . 18 [3. .335 [8.51] .425 [10.80] .156 [3.96]Typ. .120 [3.05]Typ. .008 [0.20] Min. Thick Solder Paste in Area Shown Position No. 1 .120 [3.05]Typ. .650 .010 [16.51 0.25] Solder Paste Area Header Ordering Information The "Base Part Numbers" Chart at right shows the base part number and number of posts available for the described headers. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with round tin plated posts: Base number 647648 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-647648-0 The part numbers in bold face are the RoHS equivalent version. Example: No. of Pos. 2 12 Lead Free RoHS Prefix/Suffix 3-647648-2 4-647648-2 .057 .003 [1.45 0.08] Pretinned Plated Thru Hole Typ. .100 [2.54] Pretinned Land (Both Sides) Typ. .070 Typ. [1.78] Recommended Mounting Hole Pattern for .062 [1.57] Thick PC Board Note: Consult Product Drawing for details on placing headers onto PC boards. Base Part Numbers Round Post Header Part Nos. Standard UL94V-0, Tin Plated 647648 Standard UL94V-0, .000015 [0.00038] Gold Plated 647649 RoHS Equiv. 32-42 See page 15 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. 32-42 Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. 52 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 Shrouded Headers--Straight and Right-Angle Material and Finish Housing -- UL94V-0 rated, polyester, black Posts -- Copper alloy, tin plated; or .000030 [0.00076] or .000015 [0.00038] gold over nickel Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. Peg holes are not required in PC boards when headers without pegs are used. 4. One peg only on a 2 position header, other position sizes have two pegs. 5. Right-angle front and rear bend headers with retention pegs can be made available upon request. Minimums may apply. A Straight Post (.045 [1.14] Square or Round) Right-Angle (.045 [1.14] Square) .045 [1.14] .300 [7.62] Ref. .525 [13.34] Ref. .205 .002 .156 0.05] Typ. Post [5.21 [3.96] No. 1 .455 [11.56] .210 [5.33] .455 [11.56] Polarized Retention Peg Post No. 1 .300 [7.62] .210 [5.33] .045 [1.14] .125 .010 [3.18 0.25] .525 [13.34] Front Bend .550 [13.97] .045 [1.14] .300 [7.62] Ref. .525 [13.34] Ref. .455 [11.56] For mateability options, see matrix on pages 34, 35, 54 and 58. For mating half visuals, see pages 36 thru 39 and 55. .125 [3.18] .156 [3.96] .210 [5.33] .205 [5.21] MTA-156 .156 [3.96] .100 .167 [2.54] [4.24] .125 [3.18] PC Board Hole Diameters Square Post .069/.065 [1.75/1.65] Round Post .054/.050 [1.37/1.27] .156 Typ. Post [3.96] No. 1 .125 [3.18] Header Ordering Information The "Base Part Numbers" Chart at right shows the base part number and number of posts available for the described headers. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with straight, square posts and with pegs would be: Base number 647127 plus prefix-and-suffix 4- -- -0 The correct ordering number is 4-647127-0 No. of Pos. 2 3 4 5 6 7 8 9 10 11 12 Dim. A .406 10.31 .562 14.27 .718 18.24 .874 22.20 1.030 26.16 1.186 30.12 1.342 34.09 1.498 38.05 1.654 42.01 1.810 45.97 1.966 49.94 RoHS Prefix/ Suffix 2--2 2--3 2--4 2--5 2--6 2--7 2--8 2--9 3--0 3--1 3--2 Rear Bend .069/.065 Dia. [1.75/1.65] .239 [6.07] .350/.700 [8.89/17.78] .078 [1.98] .156 [3.96] Note: Consult Product Drawing for details on placing headers onto PC boards. .167 [4.24] .066/062 [1.68/1.58] Dia. Edge of Board .156 [3.96] .078 [1.98] .245 Min. [6.22] .066/062 [1.68/1.58] Dia. Edge of Board Recommended Mounting Hole Pattern for .062 [1.57] Thick PC Board Using a Straight Post Header Recommended Mounting Hole Pattern for .062 [1.57] Thick PC Board Using a Right-Angle Header Base Part Numbers Straight Square Posts Without Pegs With Pegs Header RoHS Header RoHS Part Nos. Equiv. Part Nos. Equiv. Standard UL94V-0, Tin Plated 647123 22-32 Straight Round Posts Without Pegs With Pegs Header RoHS Header RoHS Part Nos. Equiv. Part Nos. Equiv. 647127 22-32 647124 647132 647140 22-32 647128 647136 647144 22-32 Standard UL94V-0, .000030 [0.00076] Gold Plated 647131 22-32 647135 22-32 Standard UL94V-0, .000015 [0.00038] Gold Plated 647139 22-32 647143 22-32 Square Posts Right-Angle Posts, Front Bend Without Pegs Header RoHS Part Nos. Equiv. Standard UL94V-0, Tin Plated 647125 22-32 22-32 22-32 22-32 Right-Angle Posts, Rear Bend Without Pegs Header RoHS Part Nos. Equiv. 22-32 647126 647134 22-32 Standard UL94V-0, .000030 [0.00076] Gold Plated 647133 22-32 22-32 Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Standard UL94V-0, .000015 [0.00038] Gold Plated 647141 22-32 647142 22-32 Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. 53 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 IDC Quad Connectors Product Facts I Provides four points of contact Greater current carrying capability than Standard MTA-156 Connectors Connector styles include both closed end and feedthru with locking ramp, with and without polarizing tabs in 2 through 12 positions Available for wire ranges of 18 - 22 AWG [0.9- 0.3 mm] Contacts are lubricated for fretting corrosion protection Complies with Tyco Electronics Quality Specification 102-6, "Preparation of Design Objectives" Uses existing MTA application tooling for termination Quad connectors preloaded with contacts All contacts are slotted for insulation displacement (IDC) termination technique Connectors and headers are end-to-end stackable AWG size is "frosted" on the side of the connector Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 R I I I The MTA-156 Quad Connector provides a connection with four points of contact. The UL94V-0 rated connector with multi-point contacts provides greater current carrying capability than the Standard MTA-156 Connector. These connectors comply with Tyco Electronics Quality Specification 102-6* and satisfy the VDE requirements according to VDE 110. The connectors are available for wire ranges of 18 - 22 AWG [0.9- 0.3 mm2] and in a variety of styles including closed end and feed-thru with locking ramp, with and without polarizing tabs. Only one wire to be terminated into an IDC contact slot. *The 102-6 Quality Specification is the new procedure for "Preparation of Design Objectives". Its purpose is to provide a means for verifying the maximum current carrying capacity of the device. Note: Refer to pages 70 through 74 for approved wire listings. MTA-156 .156 [3.96] I I The MTA-156 Quad Connectors only mate with standard MTA156 square post headers and use existing MTA application tooling for termination. Performance Data Voltage Rating -- 600 vac Current Rating -- 12.5 amp max. on a single circuit. For Multiple Circuit Loading -- refer to Product Specification for current rating chart. Low-Level Resistance -- 3.0 m max. initial Dielectric Withstanding Voltage -- 1500 vac/1 min. Insulation Resistance -- 5000 M min. initial Operating Temperature -- -55 C to 105 C I I I I I Technical Documents Product Specifications 108-1219 MTA-156 Quad Connector System Application Specifications 114-1048 MTA-156 Quad Connector I I Certified by Canadian Standards Association, File No. LR 7189 R This matrix has been prepared to assist you, our customer, in defining the correct mating halves for the MTA-156 header and connector combination. Where a "Y" is indicated the combination is a valid mating pair. Headers 383 385 389 445 611 613 615 617 749 751 752 754 123 I Satisfies the VDE requirements according to VDE 110, Insulation Group B, 250 vac for air and creepage paths 125 126 647 Y Y Y Y Y Y Y Y Y Y Y Y 640 640 640 640 644 644 644 644 644 644 644 644 647 647 644329 644370 644371 644375 644376 644377 644381 644382 644383 644387 644388 644389 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 54 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 Connectors 647 127 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 IDC Quad Connectors--Closed End and Feed-Thru Closed End with Locking Ramp A .097 [2.46] .090 [2.29] .280 .230 [7.11] [5.84] .180 [4.57] .100 [2.54] .245 [6.22] .100 [2.54] AWG .325 .355 [8.26] [9.02] .308 [7.82] AWG .156 Typ. [3.96] .725 [18.42] without Polarizing Tabs with Polarizing Tabs Feed-Thru with Locking Ramp A .097 [2.46] .090 [2.29] .230 .280 [5.84] [7.11] .180 [4.57] .100 [2.54] .325 .385 [8.26] [9.78] .308 [7.82] .245 [6.22] .100 [2.54] AWG MTA-156 .156 [3.96] AWG .156 Typ. [3.96] .725 [18.42] without Polarizing Tabs with Polarizing Tabs Material and Finish Housing -- UL94V-0 rated, nylon, black Contacts -- High conductivity copper alloy, post tin plated Base Part Numbers Closed End with Locking Ramp Without Tabs With Tabs Connector Type & Wire Size Connector Part Nos. RoHS Equiv. Connector Part Nos. RoHS Equiv. Feed-Thru with Locking Ramp Without Tabs With Tabs Connector Part Nos. RoHS Equiv. Connector Part Nos. RoHS Equiv. For mateability options, see matrix on page 54. For strain relief and dust covers, see pages 40 and 41. For mating half visuals, see pages 46 thru 48 and 50, 52 and 53, (49 and 51 Front Bend Headers only). Mates with tin-plated square posts only. Refer to pages 70 thru 74 for approved wire listing. Note: To determine connector overall length (Dim. A), multiply .156 x the number of circuits. Example: .156 x 10 circuits equals 1.560 inches [39.62 mm]. Standard UL94V-0, Tin Plated 18 AWG 644329 0.8-0.9 mm2 20 AWG 644370 0.5-0.6 mm2 22 AWG 644371 0.3-0.4 mm2 32-42 32-42 32-42 644381 644382 644383 32-42 32-42 32-42 644375 644376 644377 32-42 32-42 32-42 644387 644388 644389 32-42 32-42 32-42 Connector Ordering Information The "Base Part Numbers" Chart above shows the base part number and number of circuits available for the described connectors. Prefixes and suffixes are determined by the number of circuit positions in the connector. For example, the complete part number for a 10-position closed end connector with locking ramp and without polarizing tabs for 18 AWG wire would be: Base number 644329 plus prefix-and-suffix 1- -- -0 The correct ordering number is 1-644329-0 The set of numbers in bold face are the RoHS equivalent version of the standard product. Example: No. of Pos. 2 12 Standard Prefix/Suffix 644329-2 thru 1-644329-2 Lead Free RoHS Prefix/Suffix 3-644329-2 4-644329-2 Replacement IDC Contacts Material and Finish Contacts -- High conductivity copper alloy post tin plated .562 [14.27] .116 [2.95] See page 15 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Wire Size AWG mm2 18 0.8-0.9 20 0.5-0.6 22 0.3-0.4 Part Numbers 3-644508-1 3-644509-1 3-644510-1 Note: Tyco Electronics does not recommend terminating an MTA contact more than one time. Use replacement contacts when required for field repairs or wire gage changes. 55 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 IDC Card Edge Connectors--Closed End and Feed-Thru Material and Finish Housing -- UL94V-0 rated, polyester, see chart for color Contacts -- Phosphor bronze, post tin plated Note: Refer to pages 70 thru 74 for approved wire listings. C B A .094 [2.39] .161 Ref. [4.09] .156 [3.96] Typ. .170 [4.32] .075 [1.91] .380 [9.65] .300 [7.62] .440 [11.18] MTA-156 .156 [3.96] Color Coding by Wire Size for UL94V-0 Connectors 26 AWG -- Blue 24 AWG -- White 22 AWG -- Red 20 AWG -- Yellow 18 AWG -- Orange .125 Dia. [3.18] .677 [17.2] .100 [2.54] Min. .156 [3.96] Typ. D .005 [ 0.13 ] .100 [2.54] Min. R. .075 [1.91] E .138 [3.51] .015 .005 [0.38 0.13] x 45 Cham. Both sides .375 [9.53] Connector Ordering Information The "Base Part Numbers" Chart at right shows the base part number and number of circuits available for the described connectors. Prefixes and suffixes are determined by the number of circuit positions in the connector. For example, the complete part number for a 12-position closed end connector without mounting ears for 18 AWG wire would be: Base number 640859 plus prefix-and-suffix 1- -- -2 The correct ordering number is 1-640859-2 See page 15 for an explanation of RoHS lead free equivalents. Circuitry side .090 [2.29] Min. .312 .005 [7.92 0.13] .130 [3.3] Typ. B .145 [3.68] Recommended PC Board Layout for .062 [1.57] Thk. PC Board Recommended Panel Cutout Base Part Numbers Closed End Without With Mounting Ears Mounting Ears No. of No. of Connector Circuits/ Connector Circuits/ Part Nos. RoHS Part Nos. RoHS Equiv. Equiv. Standard UL94V-0, Tin Plated 3, 6, 9, 12, 3, 6, 9, 12, 18 AWG 15,18, 20-24 15,18, 20-24 640859 33, 36, 39, 42, 640864 33, 36, 39, 42, 0.8-0.9 mm2 45, 48, 50-54 45, 48, 50-54 3, 6, 9, 12, 3, 6, 9, 12, 20 AWG 15,18, 20-24 15,18, 20-24 640860 33, 36, 39, 42, 640865 33, 36, 39, 42, 2 0.5-0.6 mm 45, 48, 50-54 45, 48, 50-54 3, 6, 9, 12, 3, 6, 9, 12, 22 AWG 15,18, 20-24 15,18, 20-24 640861 33, 36, 39, 42, 640866 33, 36, 39, 42, 2 0.3-0.4 mm 45, 48, 50-54 45, 48, 50-54 3, 6, 9, 12, 3, 6, 9, 12, 24 AWG 15,18, 20-24 15,18, 20-24 640862 33, 36, 39, 42, 640867 33, 36, 39, 42, 0.2 mm2 45, 48, 50-54 45, 48, 50-54 3, 6, 9, 12, 3, 6, 9, 12, 26 AWG 15,18, 20-24 15,18, 20-24 640863 33, 36, 39, 42, 640868 33, 36, 39, 42, 0.12-0.15 mm2 45, 48, 50-54 45, 48, 50-54 Connector Type & Wire Size Feed-Thru Without With Mounting Ears Mounting Ears No. of No. of Connector Circuits/ Connector Circuits/ Part Nos. RoHS Part Nos. RoHS Equiv. Equiv. 3, 6, 9, 12, 15,18, 20-24 641283 33, 36, 39, 42, 45, 48, 50-54 3, 6, 9, 12, 15,18, 20-24 641284 33, 36, 39, 42, 45, 48, 50-54 3, 6, 9, 12, 15,18, 20-24 641285 33, 36, 39, 42, 45, 48, 50-54 3, 6, 9, 12, 15,18, 20-24 641286 33, 36, 39, 42, 45, 48, 50-54 3, 6, 9, 12, 15,18, 20-24 641287 33, 36, 39, 42, 45, 48, 50-54 3, 6, 9, 12, 15,18, 20-24 641288 33, 36, 39, 42, 45, 48, 50-54 3, 6, 9, 12, 15,18, 20-24 641289 33, 36, 39, 42, 45, 48, 50-54 3, 6, 9, 12, 15,18, 20-24 641290 33, 36, 39, 42, 45, 48, 50-54 3, 6, 9, 12, 15,18, 20-24 641291 33, 36, 39, 42, 45, 48, 50-54 3, 6, 9, 12, 15,18, 20-24 641292 33, 36, 39, 42, 45, 48, 50-54 Performance Data Voltage Rating -- 600 vac Current Rating -- 5 amp max. Low-Level Resistance -- 7 m max. initial Dielectric Withstanding Voltage -- 1250 vac/1 min. Insulation Resistance -- 5000 M min. initial Operating Temperature -- 55 C to 105 C No. of Circuits 3 6 9 12 15 18 20 21 22 23 24 Technical Documents Product Specification 108-1058 MTA-156 Card Edge Connectors Application Specification 114-1020 MTA-156 Connectors, Posted Connectors and Card Edge Connectors A .500 [12.70] .968 [24.59] 1.436 [36.47] 1.904 [48.36] 2.372 [60.25] 2.840 [72.14] 3.152 [80.06] 3.308 [84.02] 3.464 [87.99] 3.620 [91.95] 3.776 [95.91] B .926 [23.52] 1.394 [35.41] 1.862 [47.29] 2.330 [59.18] 2.798 [71.07] 3.266 [82.96] 3.578 [90.88] 3.734 [94.84] 3.890 [98.81] 4.046 [102.77] 4.202 [106.73] Dimensions C 1.248 [31.70] 1.716 [43.59] 2.184 [55.47] 2.652 [67.36] 3.120 [79.25] 3.588 [91.14] 3.900 [99.06] 4.056 [103.02] 4.212 [106.98] 4.368 [110.95] 4.524 [114.91] D .484 [12.29] .952 [24.18] 1.420 [36.07] 1.888 [47.96] 2.356 [59.84] 2.824 [71.73] 3.136 [79.65] 3.292 [83.62] 3.448 [87.58] 3.604 [91.54] 3.760 [95.50] E .650 [16.51] 1.118 [28.40] 1.586 [40.28] 2.054 [52.17] 2.522 [64.06] 2.990 [75.95] 3.302 [83.87] 3.458 [87.83] 3.614 [91.80] 3.770 [95.76] 3.926 [99.72] Prefix/ Suffix -3 -6 -9 -2 -5 -8 -0 -1 -2 -3 -4 11122222- 56 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA-156 IDC Card Edge Accessories Dust Cover Retention Dimple Material (RoHS Compliant) UL94V-0 rated, polyester, white .530 [13.46] Cover is for both Closed End and Feed-Thru connectors A .130 [3.3] Cover Ordering Information The "Base Part Numbers" Chart at right shows the base part number and number of circuits available for the described cover. Prefixes and suffixes are determined by the number of circuit positions in the cover. For example, the complete part number for a 12-position dust cover would be: Base number 641106 plus prefix-and-suffix 1- -- -2 The correct ordering number is 1-641106-2 MTA-156 .156 [3.96] Base Part Number Cover Part No. 641106 No. of Circuits 3, 6, 9, 12, 15, 18, 20-24 Locking Plugs No. of Circuits 3 6 9 12 15 18 20 21 22 23 24 Dim. A .504 12.80 .972 24.69 1.440 36.58 1.908 48.46 2.376 60.35 2.844 72.24 3.156 80.16 3.312 84.12 3.468 88.09 3.624 92.05 3.780 96.01 Prefix/ Suffix -3 -6 -9 11122222-2 -5 -8 -0 -1 -2 -3 -4 Note: Contact must be removed to install locking plug. .074 [1.88] .075 [1.91] .195 [4.95] 1.150 [29.21] Material (RoHS Compliant) UL94V-2 rated, nylon, white Part Number 641101-1 Material (RoHS Compliant) UL94V-2 rated, nylon, white Part Number 641293-1 Replacement IDC Contacts Material and Finish Phosphor bronze; post tin plated Part Numbers 3-640991-1 (18 AWG [0.8-0.9 mm2]) 3-640992-1 (20 AWG [0.5-0.6 mm2]) 3-640993-1 (22 AWG [0.3-0.4 mm2]) 3-640994-1 (24 AWG [0.2 mm2]) 3-640995-1 (26 AWG [0.12-0.15 mm2]) .900 [22.86] .609 [15.47] .126 [3.2] .100 [2.54] .170 [4.32] .130 [3.3] .100 [2.54] Note: Contact can remain during locking plug installation. 57 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors .156 [3.96] Centerline SL-156 Crimp Contacts and Housings Product Facts I Rugged wire-to-board interconnection to mate with .045 square or round post headers or staked posts on .156 centers Standard Connectors accept wire range of 18-24 AWG [0.9-0.2 mm] and LID Connectors accept wire range of 18-24 AWG [0.9-0.2 mm] and a limited 16 AWG [1.29-1.42 mm] (2550-2800 CMA) Two-piece interconnection system (connector/header) Housing made of flame retardant nylon Available in 1- through 24-position connector configurations Connectors are end-to-end stackable Wire-to-board system offers polarization with friction lock for positive mating I I Meets the material requirements of Table 23.1 of UL1410 Standard for High-Voltage Television Receivers and Video Productions Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 R I I I Certified by Canadian Standards Association, File No. LR7189 R SL-156 .156 [3.96] I I Technical Documents Product Specification 108-1049, 108-1049-1, 108-1049-2 Application Specification 114-1021 I The AMP SL-156 connectors shown on the following pages are designed to mate with .045 [1.14] square or round post headers or staked posts on .156 [3.96] centers. The wire-to-board connector is a two-piece connector system with the wire crimped to the contact, then inserted into the housing. This product mates with the MTA-156 flat, polarized and friction lock header, or staked posts (not MTA-156 shrouded headers). Performance Data Voltage Rating -- 250 vac Current Rating -- 10 amp max. at 250 vac Low-Level Resistance -- 3.0 m max. initial Dielectric Withstanding Voltage -- 2000 vac/1 min. Insulation Resistance -- 1000 M min. initial Operating Temperature -- 55 C to 105 C I These matrixes represent only the housing and header combinations. You also need to consider the plating on the contacts and headers. Gold contacts with gold headers and tin contacts with tin headers. Matrix for Tin Plated Part Numbers The Large Insulation Diameter (LID) Contacts and Housings are for use in applications where wire insulation is up to .112 [2.84] in diameter. Headers 6403 83 6403 84 6403 85 6403 87 6403 88 6403 89 6404 45 6446 11 6446 12 6446 13 6446 14 6446 15 6446 16 6446 17 6447 49 6447 50 6447 51 6447 52 6447 53 6447 54 6447 55 6472 27 6472 28 6472 29 6472 30 6472 60 6472 62 Housings Standard LID 640250 647401 640251 647400 770849 647402 YYYNYYY YYYYYYY YYYNYYY YYYNY YYYYY YYYNY YY YY YY YY YY YY YYYYNYYYNYY YYYYYYYYYYY YYYYNYYYNYY Housings LID Standard 640250 647401 640251 647400 770849 647402 YYYNYYYYYYNYYYYY YYYYYYYYYYYYYYYY YYYNYYYYYYNYYYYY Housings Standard LID 640250 647401 640251 647400 770849 647402 YYYNYYYYY YYYYYYYYY YYYNYYYYY 58 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 14 6411 15 6411 18 6411 19 6411 20 6411 21 6443 22 6447 63 6447 64 6447 65 6447 66 6447 67 6447 68 6447 69 6472 61 6411 6411 Matrix for .000015 [0.00038] Gold Plated Part Numbers 13 02 6412 03 6412 04 6412 07 6412 08 6412 09 6412 10 6446 27 6446 28 6446 29 6446 30 6446 31 6446 32 6446 33 6447 56 6447 57 6447 58 6447 59 6447 60 6447 61 6447 62 6412 Matrix for .000030 [0.00076] Gold Plated Part Numbers Headers YYYYN YYYYY YYYYN Headers YYYYYNY YYYYYYY YYYYYNY MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors SL-156 Crimp Contacts and Keying Plugs Contacts .115 [2.92] .180 [4.57] Material and Finish .012 [0.3] bright tin plated brass or phosphor bronze; .012 [0.3] pre-tin brass; or .012 [0.3] brass or phosphor bronze with .000030 [0.00076] gold over nickel (see chart) .121/.115 [3.07/2.92] .131 .004 [3.33 0.10] A High Force (6.5 Amp Max. Current Rating) B Low Force (6.5 Amp Max. Current Rating) I All tin-plated contacts are post lubricated to resist fretting corrosion Maximum insulation diameter is .105 [2.67] Wire range is 18-30 AWG [0.9-0.06 mm2] .145/.140 [3.68/3.56] .230 [5.84] I I SL-156 .156 [3.96] C Hooded (Dual Wipe) (10 Amp. Max. Current Rating) Wire Size AWG mm2 24-30 0.2-0.06 Part Numbers Loose Piece -- 640706-1 640706-2 3-640706-1 640707-1 -- 770258-1 3-640707-1 770522-1 770522-2 3-770522-1 Contact A A Material and Finish brass, pre-tin plated brass, bright tin plated brass, pre-tin plated brass, RoHS Compliant brass, bright tin plated brass, pre-tin plated brass, gold plated brass, RoHS Compliant phosphor bronze, bright tin plated phosphor bronze, gold plated phosphor bronze, RoHS Compliant Strip 641550-1 640252-1 640252-2 3-640252-1 350980-1 350980-2 350980-3 3-350980-1 770476-1 770476-2 3-770476-1 Application Note Part No. 640252 has a higher mating and unmating force than Part No. 350980 and is recommended to be used only in housings with 1 through 12 positions. Part No. 350980 can be used in any size housing but is recommended to be used in housings with 13 through 24 positions. Part No. 770476 is recommended for use in any size housing. Its mating force is similar to Part No. 350980 while unmating force is similar to 640252. 18-24 0.9-0.2 B C Application Tooling Extraction Tool Part No. 90471-1 Loose Piece Contacts -- PRO-CRIMPER II Hand Tool Part No. 58614-1 (408-4228) [For field service use only] For CERTI-CRIMP hand tool, contact Technical Support. Strip Contacts -- AMP-O-LECTRIC Model "G" Termination Machine* Applicator 680211-3 (Request Catalog 65828) AMP-O-LECTRIC Model "K" Termination Machine* Applicator 466468-2 AMP-O-MATIC Stripper-Crimper Machine* SCA 466947-1 or 567828-1 (with CQM) (Request Catalog 65004) AMPOMATOR CLS IV+ Lead Making Machine* Applicator 466468-1 (Request Catalog 82659) *Requires applicators. For part numbers, call Technical Support. For housings, see pages 60 and 61. Keying Plugs Material (RoHS Compliant) UL94V-2 rated, nylon, natural color Keying Plug Part No. 640254-1 Keying Pin Part No. 640255-1 .300 [7.62] .225 [5.72] .300 [7.62] 59 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors SL-156 Housings--Wire-to-Board Housings Material (RoHS Compliant) UL94V-0 rated, nylon, white Notes: 1. Accepts either .045 [1.14] square or round posts. Housings mate with flat and friction lock headers, or staked posts on .156 [3.96] centers. 2. Housings without ramp, with polarizing tab, available upon request. Minimums may apply. 3. Recommend contact: Part No. 640252 for 1 thru 12 positions; Part No. 350980 for 13 thru 24 positions; Part No. 770476 for 1 thru 24 positions. .250 [6.35] .250 [6.35] .660 [16.76] .100 [2.54] .019 [0.48] .156 [3.96] Typ. A .076 [1.93] Typ. .097 [2.46] 1 2 23 24 .037 Ref. [0.93] (A) With Locking Ramp/With Polarizing Tabs .660 [16.76] .100 [2.54] A .156 [3.96] Typ. .076 [1.93] Typ. .097 [2.46] SL-156 .156 [3.96] 1 2 23 24 .037 Ref. [0.93] (B) With Locking Ramp/Without Polarizing Tabs For contacts, see page 59. For mateability options, see matrix on page 58. For mating half visuals, for connectors with locking ramp, see pages 46, 47, 48, 50 and 52, (49 and 51 Front Bend Headers only.) For mating half visuals, for connectors without locking ramp, see pages 46 thru 52. .660 [16.76] .250 [6.35] A .156 [3.96] Typ. .076 [1.93] Typ. 1 2 23 24 .060 [1.52] (C) Without Locking Ramp/Without PolarizingTabs Note: Dim. A = 0.156 (No. of Positions - 1) 0.152 No. of Positions* 2-24 1-24 Housing A B C Description With Locking Ramp and Polarizing Tabs With Locking Ramp and without Polarizing Tabs Without Locking Ramp or Polarizing Tabs Part Numbers* 770849 640250 640251 *Base Part Number Prefixes and Suffixes indicate number of contact positions, e.g. 2 Position = 0-xxxxxx-2 and 12 Position = 1-xxxxxx-2. Note: Housings not for use with LID Contacts. Shown on page 62. 60 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors SL-156 Housings With Through Board Latch Housings Material (RoHS Compliant) UL94V-2 rated, nylon, white .078 [1.98] Typ. .156 [3.96] Typ. .063 .003 [1.60 0.08] .125 [3.18] .075 [1.91] 1 .063 [1.60 .003 0.08 ] 2 3 4 7 8 9 10 .250 [6.35] .660 [16.76] .050 .007 [1.27 0.18] SL-156 .156 [3.96] A Mates with .045 square or round staked posts only. For contacts, see page 59 . 10 B .052 .002 [1.32 0.05] Latch Cutout .005 .163 + .000 - .105 [2.67] R. .015 Max. [0.38] 4 Plc. .078 [1.98] .156 [3.96] PC Board Posts Recommended PC Board Cutout for .062 [1.57] Thick PC Board No. of Pos. 2 3 4 5 6 7 8 9 10 Dimensions A .312 7.92 .468 11.89 .624 15.85 .780 19.81 .936 23.77 1.092 27.74 1.248 31.70 1.404 35.66 1.560 39.62 B -- -- -- -- -- -- -- 1.092 27.74 1.248 31.70 Latch Location Centered Between Pos. 1 and 2 1 and 2 2 and 3 2 and 3 3 and 4 3 and 4 4 and 5 1 and 2 & 8 and 9 1 and 2 & 9 and 10 Part Number 1-770894-21 1-770894-31 1-770894-41 1-770894-51 1-770894-61 1-770894-71 1-770894-81 1-770894-91 1-770894-01 Note: Not for use with LID Contacts. Shown on page 62. Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 9 8 7 4 3 2 1 .105 [2.67] 0.13 [4.14 + 0.00 - 61 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors SL-156 Housings and Contacts for Large Insulation Diameter (LID) Wire Housings Material (RoHS Compliant) UL 94V-0 rated, nylon, white Notes: 1. Accepts Standard and LID contacts. 2. Larger opening in housings eases contact insertion when using wires that have large insulation diameters (.100-.112 [2.54-2.84]). 3. Housings are not End-to-End stackable. .156 Typ. [3.96] .095 Typ. [2.41] .660 [16.76] .054 [1.37] Typ. .100 [2.54] .054 [1.37] .0365 [.927] Ref. A .250 [6.35] Note: Dim. A = 0.156 (No. of Positions - 1) 0.19 SL-156 .156 [3.96] For mateability options, see matrix on page 58. For mating half visuals, for connectors with locking ramp, see pages 46, 47, 48, 50 and 52, (49 and 51 Front Bend Headers only.) For mating half visuals, for connectors without locking ramp, see pages 46 thru 52. No. of Positions* Description Without Locking Ramp or Polarizing Tabs With Locking Ramp and without Polarizing Tabs With Locking Ramp and Polarizing Tabs Part Numbers* Housings with Larger Openings for Oversize Wire 647400 647401 (shown above) 647402 1-24 2-24 *Base Part Number Prefixes and Suffixes indicate number of contact positions, e.g. 2 Position = 0-xxxxxx-2 and 12 Position = 1-xxxxxx-2. Contacts Material and Finish .012 [0.3] bright tin plated phosphor bronze; .012 [0.3] phosphor bronze with .000030 [0.00076] gold over nickel (see chart) I .160 [4.06] I I All tin-plated contacts are post lubricated to resist fretting corrosion Maximum insulation diameter is .112 [2.85] Wire range is 18-24 AWG [0.9-0.2 mm2] and a limited 16 AWG [1.29-1.42 mm2] (2550-2800 CMA) .112 [2.84] .108 [2.74] .524 [13.30] .143 Product Specifications 108-1049-1 and 108-1049-2 Application Specification 114-1021 Hooded (Dual Wipe) (10 Amp Max. Current Rating) Application Tooling Extraction Tool Part No. 90471-1 Loose Piece Contacts -- PRO-CRIMPER II Hand Tool Part No. 91368-1 [18-24 AWG] Part No. 91369-1 [16 AWG] (For field service use only.) For CERTI-CRIMP hand tool, contact Technical Support. Strip Contacts -- AMP-O-LECTRIC Model "G" Termination Machine* Applicator 1385048-3 [18-24 AWG] Applicator 1385219-3 [16 AWG] AMP-O-LECTRIC Model "K" Termination Machine* Applicator 1385048-2 [18-24 AWG] Applicator 1385219-2 [16 AWG] Wire Size Material Plating Tin Gold RoHS Compliant Tin Gold RoHS Compliant Part Numbers For LID* Wire Strip 647406-1 647406-2 3-647406-1 647466-1 647466-2 3-647466-1 Loose Piece 647409-1 647409-2 3-647409-1 647485-1 647485-2 3-647485-1 18-24 AWG Phosphor Bronze Phosphor Bronze 16 AWG (2550-2800 CMA only) *Large Insulation Diameter (.100-.112 [2.54-2.84]) Notes: 1. For information on application tooling, call Technical Support. 2. Can not be used with Standard SL-156 Housings, must be used with LID Housings only. *For additional part numbers and information contact Technical Support. 62 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors AMP Economy Power (EP) Wire-to-Board Connector System Product Facts I .156 [3.96], .200 [5.08] and .312 [7.92] centerline Wire-to-board connectors comprised of plug housings, receptacle contacts for discrete wire, and mating post headers Hooded contact designed to accept wire with insulation diameters up to .118 [3.00] Positive locking feature built into header back wall Locking mechanism on connector housing maximizes retention Number of positions: 1 to 11 for .156 [3.96] centerline; 2 to 12 for .200 [5.08] centerline; and 2 to 5 for .312 [7.92] centerline Straight, through-hole headers Positive latch design for easier mating and unmating Polarization tabs help prevent post misalignment and mismating Low-profile mating height of .641 [16.3] for 2 to 11 positions Straight headers are end-toend stackable to conserve PCB space Header packaging: bulk pack and tube loaded Plug housings and post headers intermateable with JST VH connectors Directive 2002/95/EC (RoHS Compliant Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 R I I I I I AMP EP .156 [3.96], .200 [5.08] and .312 [7.92] I I I I I I AMP Economy Power (EP) Connectors are designed for secondary power circuit applications. They consist of wire-to-pc board plug housings (for receptacle contacts) and mating post headers. Three contact centerline spacings are available: .156 [3.96], .200 [5.08] and .312 [7.92]. During mating, the positive locking lever on the outside of the plug housing engages the mating header housing to provide for greater retention. This helps maintain reliable connections, when other non-locking type connectors could vibrate apart. This same locking lever must be depressed to unmate the connectors. The locking mechanism is also located high enough to help avoid interference with pc board clear plastic coating (potting), which is a common treatment for many home appliances. Headers with .156 [3.96] centerline are offered in 2 through 11 positions; 2 through 12 positions for .200 [5.08] centerline; and .312 [7.92] centerline are available in 2 through 5 positions. Both versions are provided in bulk pack or in tubes for automatic machines. The slim, straight, post headers are stackable endto-end for greater flexibility when designing pc board configurations. The mating height of a low-profile plug and vertical header is .642 [16.3]; even the 1-position high-profile style measures only .732 [18.6] above the pc board. Compact dimensions like these are well suited for most applications in confined spaces. Performance Characteristics Voltage Rating -- 250 VAC Current Rating -- 7.5 amp max. (2 to 11 pos.), 8 amp max. (1 pos.) Low Level Overall Resistance- Initial -- 10 m max. Final -- 20 m max. Dielectric Withstanding Voltage -- 1.5 kV AC, 1 min. Insulation Resistance -- Initial -- 1000 M min. Final -- 500 M min. Durability -- 50 mating and unmating cycles Operating Temperature -- -13F to +221F [-25C to +105C] Wire Size Range -- 18-22 AWG [0.89-0.30 mm2] Insulation Diameter -- .118 [3.00] max. I I I Technical Documents Product Specification 108-5609 Application Specification 114-5253 Instruction Sheet 411-5899 I Certified by Canadian Standards Association, File No. LR 7189 R Applications I Household appliances, garage door openers, power supplies, power connections, or other areas requiring additional connector retention 63 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors AMP Economy Power (EP) Wire-to-Board Connector System (Continued) Contacts and Plug Housings, Low-Profile Crimp, Snap-in Receptacle Contacts .083 [2.11] Material and Finish (RoHS Compliant) See chart. .055 [1.40] .362 [9.19] Related Product Data Plug Housings -- Pages 64, 67 and 69 .08 [2.1 AMP EP .156 [3.96] Wire Size Range AWG mm2 Wire Insulation Diameter Material and Finish Part Number Strip Form Loose Piece 1318912-1* AMPOMATOR CLS IV+ Lead Maker Base Part No. 356500 Applicator Part Number AMP-O-LECTRIC Terminator Model K Model G Part No. Part No. 1-471273-3 354500-1 1385286-2 1385286-3 18-22 0.89-0.30 .067-.118 1.70-3.00 Phos. Brz., 1123721-1 Pre-Tin Brass, 1123721-2 Pre-Tin 1385286-1 -- * For 18-20 AWG, use Straight Action Hand Tool (SAHT) Part Number 91579-1. Plug Housings, Low-Profile Material and Finish (RoHS Compliant) Housing -- UL 94V-0 rated nylon, natural color Note: Alternate colors available upon request. Minimums may apply. Please contact product engineer or product manager for details. .524 [13.31] .284 [7.21] Circuit No. 1 A .382 [9.70] (2 Pos.) .142 [3.61] (3-11 Pos.) .295 [7.49] .150 [3.81] .059 [1.50] Related Product Data Contacts -- see above Mating Post Headers -- Pages 65 and 66 .154 [3.91] .224 [5.69] .039 [1.00] .156 [3.96] Section X-X .039 [1.00] Number of Positions 2 3 4 5 6 7 8 9 10 11 12 Dimension A .310 [ 7.86] .465 [11.82] .621 [15.78] .777 [19.74] .933 [23.70] 1.089 [27.66] 1.245 [31.62] 1.401 [35.58] 1.557 [39.54] 1.713 [43.50] 1.878 [47.70] Part Number 1-1123722-2 1-1123722-3 1-1123722-4 1-1123722-5 1-1123722-6 1-1123722-7 1-1123722-8 1-1123722-9 1-1123722-0 1-1123722-1 1-647690-2* * Consult Product Drawing for dimensional detail. 64 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors AMP Economy Power (EP) Wire-to-Board Connector System (Continued) Straight and Right-Angle Low-Profile Post Headers .156 [3.96] Centerline Material and Finish (RoHS Compliant) Housing -- UL 94V-0 rated natural color Note: Alternate colors available upon request. Minimums may apply. Please contact product engineer or product manager for details. Post -- Tin-plated brass .335 [8.5] .268 [6.8] .077 [1.95] .077 [1.95] .156 Centerline [3.96] Straight Edge of Board .156 [3.96] Typ. .078 [1.98] Typ. A .028 [0.7] .190 [4.82] .125 [3.18] .066/.062 [1.68/1.57] .045 Sq. Post [1.14] .303 [7.7] .069/.065 [1.75/1.65] Recommended Mounting Hole Pattern for .063 [1.6] Thick PC Board Post No. 1 .244 [6.2] .118 [3.0] .146 [3.7] Related Product Data Mating Plug Housings -- Page 64 Number of Positions 2 3 4 5 6 7 8 9 10 11 12 Dimension A .310 [ 7.86] .465 [11.82] .621 [15.78] .777 [19.74] .933 [23.70] 1.089 [27.66] 1.245 [31.62] 1.401 [35.58] 1.557 [39.54] 1.713 [43.50] 1.871 [47.52] Bulk Pack 1-1123723-2 1-1123723-3 1-1123723-4 1-1123723-5 1-1123723-6 1-1123723-7 1-1123723-8 1-1123723-9 1-1123723-0 1-1123723-1 1-647689-2* Part Number Tube Loaded (Pcs. per Tube) 1-1318300-2 (61) 1-1318300-3 (40) 1-1318300-4 (30) 1-1318300-5 (24) 1-1318300-6 (20) 1-1318300-7 (17) 1-1318300-8 (15) 1-1318300-9 (13) 1-1318300-0 (12) 1-1318300-1 (11) -- Bulk Pack with Pegs 1744057-2 1744057-3 1744057-4 1744057-5 1744057-6 1744057-7 1744057-8 1744057-9 1-1744057-0 1-1744057-1 1-1744057-2 AMP EP .156 [3.96] * Consult Product Drawing for dimensional detail. .156 [3.96] Centerline Material and Finish (RoHS Compliant) Housing -- UL 94V-0 rated nylon, natural color Note: Alternate colors available upon request. Minimums may apply. Please contact product engineer or product manager for details. Post -- Tin-plated brass Right-Angle A .020 [0.50] Edge of Board .339 [8.60] .272 [6.90] .156 [3.96] .350 [8.89] .045 Sq. Post [1.14] .126 [3.20] . .079 .004 [2.00 0.10] .339 [8.60] O .065/.069 [1.65/1.75] .370 [9.40] .156 Typ. [3.96] . .126 .004 [3.20 0.10] Recommended PC Board Layout Related Product Data Mating Plug Housings -- Page 64 Post No. 1 .045 Ref. .142 [3.60] [1.14] .323 [8.20] Number of Positions 2 3 4 5 6 7 8 9 10 11 12 Dimension A .312 [ 7.92] .468 [11.88] .624 [15.84] .780 [19.80] .935 [23.76] 1.091 [27.72] 1.247 [31.68] 1.403 [35.64] 1.559 [39.60] 1.715 [43.56] 1.871 [47.52] Part Number 647676-2 647676-3 647676-4 647676-5 647676-6 647676-7 647676-8 647676-9 1-647676-0 1-647676-1 1-647676-2 65 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors AMP Economy Power (EP) Wire-to-Board Connector System (Continued) Straight and Right-Angle Low-Profile Post Headers, High Temperature .156 [3.96] Centerline Material and Finish (RoHS Compliant) Housing -- UL 94V-0 rated nylon, high temperature, natural color Note: Alternate colors available upon request. Minimums may apply. Please contact product engineer or product manager for details. Post -- Tin-plated brass .156 Typ. [3.96] Straight A .190 [4.82] Maximum Temperature Rating: 280C Edge of Board .156 Typ. [3.96] .225 [5.72] .339 [8.60] Post No. 1 .045 Sq. Post [1.14] .059 [1.51] O .065/.069 [1.65/1.75] .303 [7.70] .575 [14.60] .145 [3.69] Recommended PC Board Layout .370 [9.40] Related Product Data Mating Plug Housings -- Page 64 Number of Positions 2 3 4 5 6 7 8 9 10 11 Dimension A .312 [ 7.92] .468 [11.88] .624 [15.84] .780 [19.80] .935 [23.76] 1.091 [27.72] 1.247 [31.68] 1.403 [35.64] 1.559 [39.60] 1.715 [43.56] .323 [8.21] Part Number 1744055-2 1744055-3 1744055-4 1744055-5 1744055-6 1744055-7 1744055-8 1744055-9 1-1744055-0 1-1744055-1 AMP EP .156 [3.96] Right-Angle .156 [3.96] Centerline Material and Finish (RoHS Compliant) Housing -- UL 94V-0 rated nylon, high temperature, natural color Note: Alternate colors available upon request. Minimums may apply. Please contact product engineer or product manager for details. Post -- Tin-plated brass A .190 [4.82] Edge of Board .339 [8.60] .350 [8.89] .156 Typ. [3.96] Post No. 1 .045 Sq. Post [1.14] .303 [7.70] .059 [1.51] O .065/.069 [1.65/1.75] .370 [9.40] .156 Typ. [3.96] .617 [15.68] Recommended PC Board Layout Related Product Data Mating Plug Housings -- Page 64 .142 [3.60] .323 [8.21] Number of Positions 2 3 4 5 6 7 8 9 10 11 12 Dimension A .312 [ 7.92] .468 [11.88] .624 [15.84] .780 [19.80] .935 [23.76] 1.091 [27.72] 1.247 [31.68] 1.403 [35.64] 1.559 [39.60] 1.715 [43.56] 1.871 [47.52] Part Number 1744056-2 1744056-3 1744056-4 1744056-5 1744056-6 1744056-7 1744056-8 1744056-9 1-1744056-0 1-1744056-1 1-1744056-2 66 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors AMP Economy Power (EP) Wire-to-Board Connector System (Continued) Plug Housings and Post Headers Plug Housings .200 [5.08] Centerline Material and Finish (RoHS Compliant) Housing -- UL 94V-0 rated nylon, natural color Note: Alternate colors available upon request. Minimums may apply. Please contact product engineer or product manager for details. Number of Positions 2 3 4 5 6 7 8 9 10 11 12 A .406 [10.30] .263 [8.88] .053 Typ. [1.35] Circuit No. 1 .051 [1.30] .200 Typ. [5.08] .051 [1.30] Related Product Data Contacts -- Page 64 Mating Post Headers -- See below Dimension A .353 [ 8.98] .553 [14.06] .753 [19.14] .953 [24.22] 1.153 [29.30] 1.353 [34.38] 1.553 [39.46] 1.753 [44.54] 1.953 [49.62] 2.153 [54.70] 2.353 [59.78] Part Number 1744036-2 1744036-3 1744036-4 1744036-5 1744036-6 1744036-7 1744036-8 1744036-9 1-1744036-0 1-1744036-1 1-1744036-2 Post Headers .200 [5.08] Centerline Material and Finish (RoHS Compliant) Housing -- UL 94V-0 rated nylon, natural color Note: Alternate colors available upon request. Minimums may apply. Please contact product engineer or product manager for details. Post--Tin-plated brass A .190 [4.82] .339 [8.60] .200 Typ. [5.08] O .065/.069 [1.65/1.75] .059 [1.51] .303 [7.70] AMP EP .200 [5.08] .200 Typ. [5.08] Post No. 1 .045 Sq. Post [1.14] Recommended PC Board Layout .575 [14.60] .146 [3.70] .370 [9.40] .323 [8.21] A .190 [4.82] .339 Ref. [8.60] Edge of Board .669 Max. [17.00] Related Product Data Mating Plug Housings -- See above .200 Typ. [5.08] Post No. 1 .045 Sq. Post [1.14] .080 2 Plcs. [2.02] .303 [7.70] .059 [1.51] .370 [9.40] O .065/.069 [1.65/1.75] Recommended PC Board Layout .142 [3.60] .323 [8.21] Number of Positions 2 3 4 5 6 7 8 9 10 11 12 Dimension A .302 [ 7.68] .502 [12.76] .702 [17.84] .902 [22.92] 1.102 [28.00] 1.302 [33.08] 1.502 [38.16] 1.702 [43.24] 1.902 [48.32] 2.102 [53.40] 2.302 [58.48] Part Number Straight 1744037-2 1744037-3 1744037-4 1744037-5 1744037-6 1744037-7 1744037-8 1744037-9 1-1744037-0 1-1744037-1 1-1744037-2 Right-Angle 1744048-2 1744048-3 1744048-4 1744048-5 1744048-6 1744048-7 1744048-8 1744048-9 1-1744048-0 1-1744048-1 1-1744048-2 67 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors AMP Economy Power (EP) Wire-to-Board Connector System (Continued) Straight Post Headers, Low-Profile .312 [7.92] Centerline Material and Finish (RoHS Compliant) Housing -- UL 94V-0 rated natural color Note: Alternate colors available upon request. Minimums may apply. Please contact product engineer or product manager for details. Post -- Tin-plated brass .335 [8.5] .268 [6.8] .312 [7.92] Centerline .077 [1.95] .077 [1.95] .312 [7.92] Centerline Recommended PC Board Layout Acceptable Board Thickness .062 [1.57] A .028 [0.7] .063 +.004/-0 Dia. Punched Hole [1.60 +0.1/-0] .065 +.004/-0 Dia. Drilled Hole [1.65 +0.1/-0] .045 Sq. Post [1.14] .303 [7.7] Post No. 1 .244 [6.2] .118 [3.0] Related Product Data Mating Plug Housings -- Page 64 .146 [3.7] Number of Positions 2 3 4 5 Dimension A .465 [11.82] .777 [19.74] 1.089 [27.66] 1.401 [35.58] Bulk Pack 1-1123724-2 1-1123724-3 1-1123724-4 1-1123724-5 Part Number Tube Loaded (Pcs. per Tube) 1-1318301-2 (40) 1-1318301-3 (24) 1-1318301-4 (17) 1-1318301-5 (13) AMP EP .312 [7.92] Mating Height (Low-Profile) Mating Height .642 [16.3] 68 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors AMP Economy Power (EP) Wire-to-Board Connector System (Continued) Plug Housing and Post Header, High-Profile 1 Position Plug Housing Part Number 1-1123823-1 Material and Finish (RoHS Compliant) Housing -- UL 94V-0 rated nylon, natural color Note: Alternate colors available upon request. Minimums may apply. Please contact product engineer or product manager for details. .039 [1.0] .571 [14.5] .207 [5.3] .244 [6.2] .169 [4.3] .150 [3.8] .224 [5.7] Section X-X Related Product Data Contacts -- Page 64 Mating Post Header -- See below .528 [13.4] .118 [3.0] 1 Position Post Header, Straight Part Numbers 1-1123824-1 (Bulk Pack) 1-1318831-1 (Tube Loaded, 55 pcs. per Tube) Material and Finish (RoHS Compliant) Housing -- UL 94V-0 rated nylon, natural color Note: Alternate colors available upon request. Minimums may apply. Please contact product engineer or product manager for details. Post -- Tin-plated brass .347 .252 [8.8] [6.4] .327 Max. [8.3] Urethane Coating Area .045 [1.14] Sq. Post .128 [3.25] .337 [8.55] .118 [3.0] .189 [4.8] AMP EP High-Profile 1 Position Section X-X .146 [3.7] .063 +.004/-0 Dia. Punched Hole [1.60 +0.1/-0] .079-.051+.004/-0 .065 +.004/-0 Dia. Drilled Hole [2-1.3+0.1/-0] [1.65 +0.1/-0] Component Mounting Side .079-.032.004 [2-0.80.1] .079-.142.004 [2-3.60.1] .154 [3.9] Max. Dia. Eyelet PC Board Related Product Data Mating Plug Housing -- See above .158.004 [4.00.1] .315.004 [8.00.1] .197 [5.0] Max. Dia. Soldering Side Recommended PC Board Layout Acceptable Board Thickness .062 [1.57] Mating Height (High-Profile) Mating Height .732 [18.6] Potting Height .327 [8.3] Max. Retention Lock 69 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA Wire Selection Proper wire selection is critical to the success of a wire-toboard application. The chart identifies wires that have been evaluated and approved by the product engineering section. If you plan to use a wire not on the approved list, please submit a sample 12" length of wire to Tyco Electronics for evaluation. MTA Connectors Approved Wire Listing MTA-100 Connectors UL 1007 PVC Insulation UL 1061 Semi-Rigid PVC Insulation UL 1095 Semi-Rigid PVC Insulation UL 1371 TEFLON Insulation -- TFE UL 1429 Irradiated PVC -- X.L.P.V.C. UL 2464 PVC UL 3265 Irradiated Polyethylene -- X.L.P.E. UL 3266 Irradiated Polyethylene -- X.L.P.E. MIL-W-16878, Type B-PVC Insulation UL 1213 TEFLON Insulation--T.F.E. MTA-156 Connectors UL 1007 PVC Insulation UL 1061 Semi-Rigid PVC Insulation UL 1180 TEFLON Insulation -- T.F.E. UL 1213 TEFLON Insulation -- T.F.E. UL 1316 PVC/Nylon Wall UL 1429 Irradiated PVC -- X.L.P.V.C. UL 1430 Irradiated PVC -- X.L.P.V.C. UL 1569 PVC UL 3265 Irradiated Polyethylene -- X.L.P.E. UL 3266 Irradiated Polyethylene -- X.L.P.E. Wall .015 [0.381] .009 [0.229] .012 [0.305] .006 [0.152] .010 [0.254] .013 [0.330] .010 [0.254] .015 [0.381] .010 [0.254] .010 [0.254] .015 [0.381] .009 [0.229] .015 [0.381] 010 [0.254] .015 [0.381] .010 [0.254] .015 [0.381] .015 [0.381] .010 [0.254] .015 [0.381] Approved Wire AWG 22, 24, 26, 28 22, 24, 26, 28 24 22, 26 22, 24, 26, 28 24 22, 24 22, 24 22 22 18, 20, 22, 24 18, 20, 22, 24 22 18, 22, 24 18, 22 18, 20, 22, 24 18, 20, 22, 24 18 22 18, 20, 22, 24 AWG Metric Equivalents 18 --0.8 -0.9 mm2 20 --0.5 -0.6 mm2 22 --0.3 -0.4 mm2 24 --0.2 mm2 26 --0.12 -0.15 mm2 28 --0.08 -0.09 mm2 Product Specifications 108-1050 -- MTA-100 Connectors 108-1050-1-- MTA-100 Posted Connectors 108-1051 -- MTA-156 Connectors 108-1219 -- MTA-156 Quad Connector System 108-1065 -- MTA-156 Posted Connectors 108-1058 -- MTA-156 Card Edge Connectors Note: When selecting approved wire styles noted on this list, the MTA Application Specifications guidelines must be followed. Also, due to wire variations in insulation wall thickness, hardness and wire stranding we would recommend evaluating the wire selected before final application approval. TEFLON is a trademark of E.I. DuPont de Nemours and Company. Application Specifications 114-1019 -- MTA-100 Connectors 114-1020 -- MTA-156 Connectors 114-1031 -- MTA-100 Ribbon Cable Connector Assembly 114-1032 -- MTA-156 Ribbon Cable Connector Assembly 114-1048 -- MTA-156 Quad Connector MTA-100 Ribbon Cable Preparation .036-.046 Standard (.046-.052 Allowable for 26-28 AWG Wire Only) Dead-End Notch .036-.046 Standard (.046-.052 Allowable for 26-28 AWG Wire Only) Feed-Thru Notch .062-.080 [1.57-2.03] MTA-156 Ribbon Cable Preparation .062-.080 [1.57-2.03] Feed-Thru Notch Flush-Mount Notch MTA Wire Selection .280-.450 [7.112-11.43] .100 [2.54] (Typ.) .400-.800 [10.16-20.32] Insulation Conductor Web .400-.600 [10.16-15.24] .156 [3.96] (Typ.) .500-1.000 [12.70-25.40] Insulation Conductor Web .094 [2.39] Typ. (Max.) After Notching Ribbon Cable End View .070 [1.78] Dia. (Max.) For Mass Terminating .050 [1.27] Dia. (Max.) For Mass Terminating .064 [1.63] Typ. (Max.) After Notching The dimensions shown represent the recommended minimum and maximum for notches; the actual dimension will depend on your application requirements. Notes: 1. Cable shall be notched, as indicated in the individual ribbon cable connector assembly drawing, according to the requirements specified in these figures. Conductor shall not be exposed after notching, nor shall individual wire stands be cut or nicked. 2. U.L. Style #2651 ribbon cable is approved for use with MTA-100 and MTA-156 connectors per Application Specification 114-1031 and 114-1032. Ribbon Cable -A- .010 A Notes: 1. For MTA Cable Assemblies Contact US Engineering Cable Assembly Group. 2. For IDC Cable, see pages 71 thru 74. Per Inch of Cable Width Cable Edge-to-End Alignment (Ends of the cable shall be prepared as indicated in this figure) 70 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors IDC Ribbon Cable Product Facts I Compatible with a variety of Insulation Displacement Connectors Available on .025 [0.63], .0394 [1.00], .050 [1.27], .100 [2.54] and .156 [3.96] centerline Color code edge mark on conductor #1 Gray flame retardant flexible PVC insulation Insulation rated for temperature of -20C to +105C Recognized under the Component Program of Underwriters Laboratories Inc., File No. E53793 R I I I I I Tyco Electronics Corporation has an expanding array of MADISON CABLE planar PVC insulated product designed for compatibility with a variety of Insulation Displacement Connectors. AMP IDC terminations offer a quick, reliable, cost-effective cabling system which can be automated. The .100 [2.54] centerline cable is available in 28 to 22 AWG, either as tinned or as overcoated tinned wire, in 2 to 28 conductors. The .156 [3.96] centerline is available in 22 AWG and 18 AWG, either as tinned or overcoated tinned, in 2 to 24 conductors. IDC Ribbon Cable is produced to tighter standards than usually required for high yield insulation displacement terminations. The extra precision offers uncomplicated operation in fully automatic stripping, notching and termination equipment. IDC Ribbon Cable .050 [1.27] Centerline, IDC Ribbon Cable Product Specifications Voltage Rating -- 30 VAC Component Recognized by UL to US and Canadian Standards -- AWM Style 2651 Sizes -- 26 AWG, 7/34 Tinned copper, PVC insulation (9 - 64 conductors), 500-ft reels (Base AMP Part Number 57034) 28 AWG, 7/36 Tinned copper, PVC insulation (9 - 64 conductors), 100-ft reels (Base AMP Part Number 57040) and 500-ft reels (Base AMP Part Number 971111) 30 AWG, Other conductor counts available on request. For ordering information, call Toll-Free: 1-877-623-4766 or visit: http://www.madisoncable.com/ fsproducts.htm 71 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors .100 [2.54] Centerline, IDC Ribbon Cable, PVC Insulation Product Specifications Voltage Rating -- 300 Volts UL Recognized -- AWM Style 2651 CSA -- Available on request A .050 [1.27] Typ. B C .010 [0.25] .100 [2.54] Typ. Edge Mark Insulation -- Gray Flame Retardant Flexible PVC .007 [0.17] Minimum Insulation Thickness Temperature Rating -- -20C to +105C Flammability -- UL: VW1 No. of Conductors A Dimensions B C Part Number No. of Conductors A Dimensions B C Part Number 28 AWG 7/32 Tinned Copper 2 0.100 [2.54] 5 0.400 [10.16] 10 0.900 [22.86] 15 1.400 [35.56] 20 1.900 [48.26] 25 2.400 [60.96] 28 2.700 [68.58] 26 AWG 7/34 Tinned Copper 2 0.100 [2.54] 5 0.400 [10.16] 10 0.900 [22.86] 15 1.400 [35.56] 20 1.900 [48.26] 25 2.400 [60.96] 28 2.700 [68.58] 0.200 [5.08] 0.500 [12.70] 1.000 [25.40] 1.500 [38.10] 2.000 [50.80] 2.500 [63.50] 2.800 [71.12] 0.200 [6.08] 0.500 [12.70] 1.000 [25.40] 1.500 [38.10] 2.000 [50.80] 2.500 [63.50] 2.800 [71.12] 0.044 0.044 0.044 0.044 0.044 0.044 0.044 0.039 0.039 0.039 0.039 0.039 0.039 0.039 0.039 0.039 0.039 0.039 0.039 0.039 0.039 [1.12] [1.12] [1.12] [1.12] [1.12] [1.12] [1.12] [.99] [.99] [.99] [.99] [.99] [.99] [.99] [.99] [.99] [.99] [.99] [.99] [.99] [.99] 02WFY00006P 05WFY00006P 10WFY00006P 15WFY00006P 20WFY00006P 25WFY00006P 28WFY00006P 02WEY00008P 05WEY00004P 10WEY00012P 15WEY00002P 20WEY00008P 25WEY00008P 28WEY00008P 02WEY00007P 05WEY00007P 10WEY00007P 15WEY00007P 20WEY00007P 25WEY00007P 28WEY00007P 24 AWG 7/32 Overcoated Tinned Copper 2 0.100 [2.54] 0.200 [5.08] 5 0.400 [10.16] 0.500 [12.70] 10 0.900 [22.86] 1.000 [25.40] 15 1.400 [35.56] 1.500 [38.10] 20 1.900 [48.26] 2.000 [50.80] 25 2.400 [60.96] 2.500 [63.50] 28 2.700 [68.58] 2.800 [71.12] 22 AWG 7/30 Tinned Copper 2 0.100 [2.54] 5 0.400 [10.16] 10 0.900 [22.86[ 15 1.400 [35.56] 20 1.900 [48.26] 25 2.400 [60.96] 28 2.700 [68.58] 0.200 [5.08] 0.500 [12.70] 1.000 [25.40] 1.500 [38.10] 2.000 [50.80] 2.500 [63.50] 2.800 [71.12] 0.044 0.044 0.044 0.044 0.044 0.044 0.044 0.051 0.051 0.051 0.051 0.051 0.051 0.051 [1.12] [1.12] [1.12] [1.12] [1.12] [1.12] [1.12] [1.30] [1.30] [1.30] [1.30] [1.30] [1.30] [1.30] 02WFY00007P 05WFY00007P 10WFY00007P 15WFY00007P 20WFY00007P 25WFY00007P 28WFY00007P 02WGY00001P 05WGY00006P 10WGY00002P 15WGY00006P 20WGY00006P 25WGY00006P 28WGY00006P IDC Ribbon Cable 26 AWG 7/34 Overcoated Tinned Copper 2 0.100 [2.54] 0.200 [5.08] 5 0.400 [10.16] 0.500 [12.70] 10 0.900 [22.86] 1.000 [25.40] 15 1.400 [35.56] 1.500 [38.10] 20 1.900 [48.26] 2.000 [50.80] 25 2.400 [60.96] 2.500 [63.50] 28 2.700 [68.58] 2.800 [71.12] Other Conductor Counts Available on Request. Contact MADISON CABLE (1-877-MADISON), a Division of Tyco Electronics Corporation, for engineering questions or for order placement of this cable. 72 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors .156 [3.96] Centerline, Flat Ribbon Cable, PVC Insulation Product Specifications Voltage Rating -- 300 Volts UL Recognized -- AWM Style 2651 CSA -- Available on request B A .078 [1.98] Typ. C .010 [0.25] Edge Mark .156 [3.96] Typ. Insulation -- Gray Flame Retardant Flexible PVC .007 [0.17] Minimum Insulation Thickness Temperature Rating -- -20C to +105C Flammability -- UL: VW1 No. of Conductors A Dimensions B C Part Number 22 AWG 7/30 Tinned Copper 2 0.156 [3.96] 5 0.624 [15.85] 10 1.404 [35.66] 15 2.184 [55.47] 20 2.964 [75.29] 24 3.588 [91.14] 18 AWG 7/26 Tinned Copper 2 0.156 [3.96] 5 0.624 [15.85] 10 1.404 [35.66] 15 2.184 [55.47] 20 2.964 [75.29] 24 3.588 [91.14] 0.312 [7.92] 0.780 [19.81] 1.560 [39.62] 2.340 [59.44] 3.120 [79.25] 3.744 [95.10] 0.312 [7.92] 0.780 [19.81] 1.560 [39.62] 2.340 [59.44] 3.120 [79.25] 3.744 [95.10] 0.051 0.051 0.051 0.051 0.051 0.051 0.068 0.068 0.068 0.068 0.068 0.068 [1.30] [1.30] [1.30] [1.30] [1.30] [1.30] [1.73] [1.73] [1.73] [1.73] [1.73] [1.73] 02WGY00008P 05WGY00008P 10WGY00008P 15WGY00008P 20WGY00008P 24WGY00008P 02WJY000001P 05WJY000010P 10WJY000010P 15WJY000010P 20WJY000010P 24WJY000010P Other Conductor Counts Available on Request. Contact MADISON CABLE (1-877-MADISON), a Division of Tyco Electronics Corporation, for engineering questions or for order placement of this cable. IDC Ribbon Cable 73 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Prepared IDC Ribbon Cable In addition to bulk cable, the US Engineering Cable Assembly Group offers Prepared Cable for the .100 [2.54] and .156 [3.96] centerline cables. This can be in the form of prenotched cable on reels or cut-tolength cable segments. Prenotched 250 foot reels of cable can be produced with notches at varying increments or repeating all along the cable. The maximum width of these cables is 20 conductor for the .100 [2.54] centerline and 13 conductor for the .156 [3.96] centerline. Prepared Cable is also available with a Strip and Retain feature allowing the cable assembly to be soldered directly to the PC Board. This saves space and cost and reduces spare parts inventory. Strip and Retain on both ends is used in family board applications to maintain the IDC Ribbon Cable electrical connection when the PC Board is separated into smaller boards after soldering. Widths are limited to 20 conductors for the .100 [2.54] centerline and 13 conductors for the .156 [3.96] centerline. However, multiple cables can be placed side-by-side in a single connector. For other styles and configurations contact the product engineer or product manager. 74 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA Wire Termination Flowchart Choose the appropriate MTA Connector from the MTA Catalog 82056. Select the proper wire style and AWG for the chosen MTA Connector (Refer to pages 70-74). Choose the MTA Termination Tooling (Refer to pages 76-79). Terminate the Wire-to-MTA Connector per Application Tooling Instruction Sheet. Inspect the MTA Wire Termination per Application Specification, especially the wire depth. See illustrations: 114-13072 -- MTA-50 Connectors, 114-1019 -- MTA-100 Connectors, 114-1020 -- MTA-156 Connectors, Posted Connector, Card Edge, 114-1048 -- MTA-156 Quad Connectors, 114-1031 -- MTA-100 Ribbon Cable Connector Assembly, and 114-1032 -- MTA-156 Ribbon Cable Connector Assembly. Top of Contact B Min. Conductor Bare wires will not be visible beyond back of housing A Centerline of Conductor Bare wires will not extend above top of contact Back of Housing Insulation Strain Relief MTA Wire Termination Flowchart Connector MTA-100 Conductor Insulation will be contained within the confines of the insulation strain relief as indicated MTA-156 A .069-.087 [1.75-2.21] .090-.113 [2.29-2.87] B .040 [1.02] .060 [1.52] Adjust the Termination Tooling (if needed) per Tooling Instruction Sheet (repeat the step above). 75 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA Application Tooling Options One-At-A-Time Termination Tooling Part Numbers MTA Connector Assembly Note: Max. Insulation Outside Diameter Wire: .060 [1.52] for MTA-100 Connectors /.095 [2.41] for MTA-156 Connectors Notes: 1. A repair kit consists of a cam, a feed-slide sub-assembly and a locating pawl. Repair kits can be made available for other interchangeable heads. Consult Tyco Electronics. 2. Standard modular heads 58246-1 and 58247-1 are recommended for low volume use. 3. Extended wear modular heads 58246-2 and 58247-2 are recommended for high volume use. 4. T-Handle Maintenance Tools are for maintenance (field) use only. They are not recommended for production. 5. Some Manual Hand Tool Assemblies are available: a. Order 58579-1, comprised of Head 58246-1 with Manual Hand Tool 58074-1. b. Order 58580-1, comprised of Head 58247-1 with Manual Hand Tool 58074-1. c. Order 58639-1, comprised of Head 58638-1 with Manual Hand Tool 58074-1. Interchangeable Head and Interchangeable Head and Interchangeable Head Loose-Piece Feed Track Tape Feed Track T-Handle Manual Hand Tool 58074-1 Special Air Bench Mount Air Bench Mount Air Hand Tool 58075-1 Applicator Maintenance Tool 58338-1 Tool 58338-1 Tool Air Bench Mount Tool 58338-1 Electric Bench Electric Bench Electric Bench Machine 931800-1 Machine 931800-1 Machine 931800-1 1583503-1 58246-1 (Standard)*n 58246-2 (Ext Wear)* 58246-3 (Ribbon Cable) 58442-1 58638-1 58247-1 (Standard)** 58247-2 (Ext Wear) 58247-3 (Ribbon Cable) 58443-1 58082-1 58061-1 58392-1 **Repair Kit 856600-2 -- -- 853546-1 & 853542-1 (Base) -- -- 853547-1 & 853542-1 (Base) -- -- -- -- -- -- MTA-50 Closed End Feed Thru Closed End MTA-100 Connector Feed Thru Posted (Closed-End) Closed End MTA-156 Connector Feed Thru Posted (Closed-End) MTA-156 Closed Card-Edge End MTA-156 Closed Quad End *Repair Kit 856600-1 933567-1 -- -- 466728-1 -- -- 59803-1 59803-1 59803-1 933568-1 -- -- -- -- 466727-1 -- -- 567020-1 -- 59804-1 59804-1 59804-1 59839-1 59804-1 MTA-50 Mass Termination Tooling Part Numbers Manual Arbor Frame (with slide) Part Number 1583518-1* Upper Tooling Part Number 1583514-1* Fixture, Discrete Wire, Closed End Part Number 1583515-1 (28-26 AWG) Part Number 1583515-2 (30-28 AWG) Fixture, Discrete Wire, Feed-Thru Part Number 1583516-1 (28-26 AWG) Part Number 1583516-2 (30-28 AWG) Fixture, Ribbon Cable, Closed End or Feed-Thru Part Number 1583517-1 *Required, plus appropriate Fixture(s). Note: Max. Insulation Outside Diameter Wire: .050 [1.27] for MTA-100 Connectors /.070 [1.78] for MTA-156 Connectors MTA-100 and MTA-156 Mass Termination Tooling Part Numbers MTA Connector Assembly Interchangeable Head Part Number Used With Closed End Feed Thru Closed End (Posted) Feed Thru (Posted) Closed End -- 58644-1 (Discrete Wire) 58644-2 (Notched Cable) -- 58074-1 (Man Hd Tl) -- -- -- 58074-1 (Man Hd Tl) -- -- -- -- MTA-100 Connector -- -- -- 58646-1 (Discrete Wire) 58646-2 (Notched Cable) -- -- -- -- Harness Board Holding Fixture Used With Part Number Applicator Tooling Assembly Assembly 58242-1 -- 58242-3 58575-1 Manual Bench 58243-1 -- Tool 58024-1 58243-3 58575-1 and Tooling Assembly 58635-1 58575-1 58039-1 58636-1 58244-1 58244-3 58245-1 58245-3 59848-1 59848-3 58009-1 58009-2 58010-2 58244-1 58244-3 58245-1 58245-3 58575-1 -- 58576-1 -- 58576-1 -- 58576-1 -- 58576-1 58576-1 -- 58576-1 -- 58576-1 Manual Bench Tool 58024-1 and Tooling Assy 58040-1 58024-1 and Tooling Assy 58040-1 Interchangeable Head and Tape Feed Track Part Number Used With 854175-1 & 854200-1 (Base) -- -- -- 854176-1 & 854200-1 (Base) 312522-1 -- -- -- 312522-1 -- -- -- -- -- Application Tooling Feed Thru MTA-156 Connector Card Edge Closed End (Posted) Feed Thru (Posted) Closed End MTA-156 Quad Feed Thru Manual Bench Tool 58024-1 and Tooling Assembly 58040-1 -- -- -- -- -- -- -- -- -- 2- through 12-positions. 2- through 8-positions. 76 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA Application Tooling Options (Continued) One-At-A-Time Termination Tooling (Typical Tooling Combinations) Manual Hand Tool with Interchangeable Head Air Hand Tool with Interchangeable Head Air Bench Mount Tool with Interchangeable Head and Foot Switch Electric Bench Machine with Interchangeable Head Power Units Manual Hand Tool -- Pistol Grip Handle Part No. 58074-1 I I Air Hand Tool -- Pistol Grip Pneumatic Handle Part No. 58075-1 I I Air Bench Mount Tool -- Bench Mount Power Assembly Part No. 58338-1 I Electric Bench Machine -- IDC Power Unit Part No. 931800-1 I I I I Easy to use Ratchet control will not release the trigger until it is fully bottomed Head may be rotated for user convenience I Light weight Operates at air pressure between 40 and 70 psi [2.76 and 4.83 bar] Head may be rotated for user convenience I I May be mounted with interchangeable head pointed up or down Operated by a foot switch Operates at air pressure between 40 and 70 psi [2.76 and 4.83 bar] All electric: 120 VAC, 60 Hz, 2 A Compact, portable and quiet Operated by a foot switch Air Bench Mount Tool with Interchangeable Head and Loose-Piece Feed Track Electric Bench Machine with Interchangeable Head and Tape Feed Track AMP-O-LECTRIC Bench Machine with Special Applicator Interchangeable Heads and Applicators (Refer to page 76 for part numbers.) Interchangeable Head I I I Terminates one unstripped wire per cycle Aligns and holds the connector in place for each termination Automatically advances the connector after each termination Interchangeable Head and Loose-Piece Feed Track I I I Interchangeable Head and Tape Feed Track I I No special setup required Connectors are easily loaded into feed track Connectors are fed using a simple spring-loaded pusher I No special setup required Tape-mounted connectors are transferred from product reel to feed track by simply pulling on the free end of the carrier tape Connectors are fed using a simple spring-loaded pusher Special Applicator I Connectors are easily hand loaded into feed track I Automatically advances the connector after each termination I Cannot be cycled until the connector is properly positioned Application Tooling T-Handle Maintenance Tool 77 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA Application Tooling Options (Continued) Mass Termination Tooling (Typical Tooling Combinations) Manual Bench Tool with Applicator and Holding Fixture Air Harness Tool with Applicator Air Bench Machine 2700 lb Air Bench Machine with Ribbon Cable Notcher Assembly Power Units Manual Bench Tool -- Arbor Frame Assembly Part No. 58024-1 I I I Applicator and holding fixture can be oriented for operator convenience for closed-end or feed-thru terminations Ram height (insertion depth) is easily adjusted May be bench mounted Air Harness Tools -- Hand-Held Power Unit with Applicator Part No. 58575-1 (MTA-100) Part No. 58576-1 (MTA-156) I Air Bench Machine -- Pneumatic Unit Part No. 91112-2 I I 2700 lb Air Bench Machine -- Part No. 312522-1 I I I Applicator can be rotated 360 for orientation with holding fixture Insertion depth is easily adjusted Operates at air pressure between 75 and 95 psi [5.17 and 6.55 bar] I Operated by a foot switch Operates at air pressure between 80 and 90 psi [5.52 and 6.21 bar] Not recommended for notching cable with more than 14 conductors Operated by a foot switch Capable of exerting 2,700 lb [12,000 N] of force at minimum 80 psi [5.52 bar] air pressure May be bench mounted I I Applicators and Notcher Assemblies Ribbon Cable Notcher Assembly I I Manual Bench Tool with Applicator and Tape Feed Track I Applicator and Holding Fixture I Applicator and Tape Feed Track I I I Wires are laced into plastic combs for mass termination Trims excess wire for closed-end terminations Holding fixture may be mounted to a harness board I I Tape-mounted connectors are transferred from product reel to feed track by simply pulling on the free end of the carrier tape Connectors are fed using a simple spring-loaded pusher Feed stop easily adjusted for different connector sizes Notch cable with up to 28 conductors for .100 centerline, and 24 conductors for .156 centerline Pressure plate holds cable in position during notching Scrap conveniently removed through a chute with a blast of air from a built-in air valve Wire Size AWG 26-28 22-28 Ribbon Cable Notcher Assembly Application Tooling Part Number 854449-2 854449-4 Centerline .100 2.54 .100 2.54 .156 3.96 Used With Manual Bench Tool 58024-1 Air Bench Machine 91112-2 2700 lb Bench Machine 312522-1 AMP-O-LECTRIC Bench Machine 1-471273-3 (with Conversion Kit 690675-2) 854449-3 18-24 Use Adapter 854468-1 when putting Notcher in the AMP-O-LECTRIC Machine. Use Adapter 854468-2 when putting Notcher in the 2700 lb Air Bench Machine. 78 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MTA Application Tooling Options (Continued) Technical Documents The following is a list of technical documents covering the installation, operation, adjustment, maintenance and repair of MTA application tooling. Instruction Sheets (IS) provide instructions for assembling or applying the product. They are intended for the Manufacturing Assembler or Operator. Customer Manuals (CM) provide complete, detailed instructions on the installation, operation, adjustment, maintenance and repair of complex tools and application machines. Applicator Instructions (AI) are similar to instruction sheets (which cover products and tools), and provide instructions for installation, adjustment and maintenance of applicators used in automatic and semiautomatic machines. Hand Tools, Power Units & Accessories Manual Arbor Frame (MTA-50) Upper Tooling (MTA-50) Manual Arbor Frame Assembly Ribbon Cable Applicator, .100 Ribbon Cable Applicator, .156 Manual Hand Tool Air Bench Mount Tool Air Hand Tool (MTA-100) Air Harness Tool (MTA-156) T-Handle Maintenance Tool (MTA-100) T-Handle Maintenance Tool (MTA-156) Air Arbor Frame Assembly 1583518-1 1583514-1 58024-1 58039-1 58040-1 58074-1 58338-1 58575-1 58576-1 59803-1 59804-1 91112-2 IS 408-8812 IS 408-8812 IS 408-6923 IS 408-6685 IS 408-6701 IS 408-6790 IS 408-9393 IS 408-4260 IS 408-4260 IS 408-7907 IS 408-7907 IS 408-7763 2700 lb Air Bench Machine Terminator Assembly, "G" Term AMP-O-LECTRIC Bench Machine Conversion Kit Base Assembly Base Adapter (AMP-O-LECTRIC) Adapter (2700 lb Machine) Repair Kit Repair Kit Electric Bench Mount Tool 312522-1 354500-1 1-471273-3 690675-2 853542-1 854200-1 854468-1 854468-2 856600-1 856600-2 931800-1 CM 409-5843 CM 409-5842 CM 409-5128 IS 408-8022 IS 408-9636 IS 408-9650 IS 408-9687 IS 408-9687 IS 408-9745 IS 408-9745 CM 409-5746 One-At-A-Time Termination Tooling Interchangeable Heads MTA-50 1583503-1 IS 408-8801 MTA-100 58246-1 IS 408-6929 58246-2 IS 408-9379 58246-3 IS 408-4147 58442-1 IS 408-9603 58638-1 IS 408-4358 58247-1 58247-2 58247-3 58443-1 58061-1 58082-1 58392-1 MTA-156 IS IS IS IS IS IS IS 408-6930 408-9380 408-4146 408-9607 408-6794 408-6795 408-9450 Interchangeable Head & Loose Piece Feed Track MTA-100 MTA-156 933567-1 IS 408-9435 933568-1 IS 408-9466 Interchangeable Heads & Tape Feed Track MTA-100 MTA-156 853546-1 IS 408-9636 853547-1 IS 408-9637 Special Applicators MTA-100 MTA-156 466728-1 AI 408-8054 466727-1 AI 408-8054 567020-1 AI 408-8069 Mass Termination Tooling MTA-50 1583515-1 IS 1583515-2 IS 1583516-1 IS 1583516-2 IS 1583517-1 IS 408-8812 408-8812 408-8812 408-8812 408-8812 58242-1 58242-3 58243-1 58635-1 58636-1 58644-1 58644-2 59844-1 59845-1 59845-3 MTA-100 IS IS IS IS IS IS IS IS IS IS 408-7994 408-7994 408-7994 408-7994 408-7994 408-4406 408-4440 408-7994 408-7994 408-7994 58009-1 58009-2 58010-2 58244-1 58244-3 58245-1 58245-3 58646-1 58646-2 59848-1 59848-3 MTA-156 IS 408-7995 IS 408-7995 IS 408-7995 IS 408-7995 IS 408-7995 IS 408-7995 IS 408-7995 IS 408-4405 IS 408-4439 IS 408-7995 IS 408-7995 Die Set Assembly MTA-100 854175-1 IS 408-9667 854176-1 MTA-156 IS 408-9650 Typical Application Rates Produce 6-in. [15 cm] Long Jumpers, One 4-Position MTA-100 Connector per End, Discrete Wire Method Manual Hand Tool 58074-1 with Interchangeable Head 58246-1 Electric Bench Machine 931800-1 with Interchangeable Head 58246-1 Electric Bench Machine 931800-1 with Interchangeable Head and Loose-Piece Feed Track 933567-1 Electric Bench Machine 931800-1 with Interchangeable Head and Tape Feed Track 853546-1 and 853542-1 (Base) Terminations Per Hour -- 900 1,100 Produce 6-in. [15 cm] Long Jumpers, One 4-Position MTA-100 Connector per End, Ribbon Cable* Method 2700 lb Air Bench Machine 312522-1 with Applicator and Tape Feed Track 854175-1 and 854200-1 (Base) Terminations Per Hour 7,500 Application Tooling * Procedure: Mass terminate 12-conductor ribbon cable with three connectors per end. After terminating, separate by tearing the 12-conductor assembly into three 4-conductor assemblies. 1,250 Cable Notching Method 2700 lb Air Bench Machine 312522-1 with Ribbon Cable Notcher Assembly 854449-2 and 854468-2 (Adapter) Cable Ends Per Hour 1,000 Apply One 4-Position MTA-100 Feed-Thru Connector per Assembly, Discrete Wire Method Manual Bench Tool 58024-1 with Applicator and Holding Fixture For further information about tooling call Technical Support. Terminations Per Hour 650 79 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Part Number Index Note: This index lists all cataloged parts by base no. only. Complete part nos. (with prefixes and/or suffixes) are shown on the page(s) indicated. Part No. 02WEY00007P 02WEY00008P 02WFY00006P 02WFY00007P 02WGY00001P 02WGY00008P 02WJY000001P 05WEY00004P 05WEY00007P 05WFY00006P 05WFY00007P 05WGY00006P 05WGY00008P 05WJY000010P 10WEY00007P 10WEY00012P 10WFY00006P 10WFY00007P 10WGY00002P 10WGY00008P 10WJY000010P 15WEY00002P 15WEY00007P 15WFY00006P 15WFY00007P 15WGY00006P 15WGY00008P 15WJY000010P 20WEY00007P 20WEY00008P 20WFY00006P 20WFY00007P 20WGY00006P 20WGY00008P 20WJY000010P 24WGY00008P 24WJY000010P 25WEY00007P 25WEY00008P 25WFY00006P 25WFY00007P 25WGY00006P 28WEY00007P 28WEY00008P 28WFY00006P 28WFY00007P 28WGY00006P 57034 57040 350980 640250 640251 640252 640383 640384 640385 640387 640388 Page 72 72 72 72 72 73 73 72 72 72 72 72 73 73 72 72 72 72 72 73 73 72 72 72 72 72 73 73 72 72 72 72 72 73 73 73 73 72 72 72 72 72 72 72 72 72 72 71 71 59, 60 60 60 59, 60 46 46 47 49 48 Part No. 640389 640426 640427 640428 640429 640430 640431 640432 640433 640434 640435 640440 640441 640442 640443 640445 640452 640453 640454 640455 640456 640457 640468 640469 640470 640471 640472 640473 640474 640475 640476 640477 640478 640479 640480 640481 640550 640551 640556 640557 640558 640559 640595 640599 640600 640601 640602 640604 640605 640606 640607 640608 640620 640621 640622 640623 640629 640630 640631 640632 640633 640634 Page 49 37 37 37 37 37 37 37 37 37 37 15 15 15 15 48 21 21 23 23 24 24 15 15 15 15 37 37 37 37 37 37 37 37 37 37 16 40 41 41 41 41 39 39 39 39 39 39 39 39 39 39 15 15 15 15 42 42 41 41 41 41 Part No. 640635 640636 640637 640638 640639 640642 640643 640706 640707 640708 640709 640859 640860 640861 640862 640863 640864 640865 640866 640867 640868 641101 641106 641113 641114 641115 641118 641119 641120 641121 641122 641123 641124 641125 641126 641127 641143 641144 641145 641146 641147 641148 641149 641150 641151 641152 641153 641154 641155 641156 641157 641168 641169 641170 641171 641172 641173 641174 641175 641176 641177 641186 Page 41 17 17 17 17 16 40 59 59 17 17 56 56 56 56 56 56 56 56 56 56 57 57 46 46 47 49 48 48 49 21 21 23 23 24 24 41 41 41 41 41 37 37 37 37 37 37 37 37 37 37 39 39 39 39 39 39 39 39 39 39 17 Part No. 641187 641188 641189 641190 641191 641192 641193 641198 641199 641200 641201 641202 641203 641204 641207 641208 641209 641210 641211 641212 641213 641214 641215 641216 641217 641218 641219 641220 641221 641222 641223 641224 641225 641226 641227 641228 641229 641230 641231 641232 641233 641234 641235 641236 641237 641238 641239 641240 641241 641242 641243 641244 641283 641284 641285 641286 641287 641288 641289 641290 641291 641292 Page 17 17 17 15 15 15 15 15 15 15 15 46 46 47 49 48 48 49 21 21 23 23 24 24 37 37 37 37 37 37 37 37 37 37 39 39 39 39 39 39 39 39 39 39 15 15 15 15 15 15 15 15 56 56 56 56 56 56 56 56 56 56 Part Number Index 80 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Part Number Index (Continued) Part No. 641293 641301 641302 641303 641304 641305 641306 641307 641308 641309 641310 641311 641312 641313 641314 641425 641426 641427 641428 641429 641435 641436 641437 641438 641439 641440 641522 641523 641524 641525 641526 641533 641534 641535 641536 641537 641550 641623 641643 641644 641645 641646 641653 641654 641655 641656 641994 643067 643071 643075 643077 643498 643813 643814 643815 643816 643817 643818 643819 643820 643821 643828 Page 57 39 39 39 39 39 39 39 39 39 39 15 15 15 15 45 45 45 45 45 45 45 45 45 45 42 45 45 45 45 45 42 15 15 15 15 59 42 17 17 17 17 15 15 15 15 17 40 40 16 16 15 15 15 15 15 37 37 37 37 37 15 Part No. 643995 644020 644038 644040 644042 644043 644044 644082 644083 644284 644312 644313 644329 644370 644371 644375 644376 644377 644381 644382 644383 644387 644388 644389 644456 644457 644460 644461 644462 644463 644464 644465 644466 644467 644468 644469 644470 644471 644472 644486 644487 644488 644489 644497 644501 644502 644508 644509 644510 644511 644512 644513 644514 644540 644563 644564 644565 644566 644567 644569 644570 644572 Page 45 15 15 15 15 15 15 37 15 37 15 15 55 55 55 55 55 55 55 55 55 55 55 55 22 22 37 37 37 37 37 39 39 39 39 39 39 39 39 30 30 30 30 15 37 37 55 55 55 15 15 15 15 15 15 15 15 37 39 39 39 39 Part No. 644574 644575 644576 644577 644578 644579 644611 644612 644613 644614 644615 644616 644617 644627 644628 644629 644630 644631 644632 644633 644662 644663 644687 644694 644695 644702 644718 644720 644726 644749 644750 644751 644752 644753 644754 644755 644756 644757 644758 644759 644760 644761 644762 644763 644764 644765 644766 644767 644768 644769 644783 644791 644795 644803 644807 644809 644812 644814 644860 644861 644874 644875 Page 15 15 15 15 15 15 50 50 51 51 50 50 51 50 50 51 51 50 50 51 37 37 37 22 22 15 39 39 15 46 46 47 48 48 49 49 46 46 47 48 48 49 49 46 46 47 48 48 49 49 37 37 15 30 45 45 45 45 37 30 24 24 Part No. 644876 644877 644878 644884 644885 644886 644887 644888 644889 644890 644891 644892 644893 644894 644896 644897 644898 647000 647001 647002 647003 647004 647005 647006 647007 647008 647009 647010 647011 647012 647013 647014 647015 647016 647017 647018 647019 647020 647021 647022 647023 647030 647031 647032 647033 647047 647048 647050 647051 647075 647076 647078 647079 647106 647107 647108 647109 647114 647116 647117 647123 647124 Page 23 23 37 22 22 22 22 22 22 22 22 32 32 32 32 32 32 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 27 27 28 28 27 27 28 28 29 29 29 27 27 28 28 53 53 Part Number Index 81 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Part Number Index (Continued) Part No. 647125 647126 647127 647128 647131 647132 647133 647134 647135 647136 647139 647140 647141 647142 647143 647144 647166 647167 647168 647295 647296 647297 647298 647299 647300 647400 647401 647402 647406 647409 647466 647476 647477 Page 53 53 53 53 53 53 53 53 53 53 53 53 53 53 53 53 29 29 29 28 28 28 27 27 27 62 62 62 62 62 62 45 15 Part No. 647478 647479 647480 647481 647485 647496 647497 647609 647623 647624 647625 647626 647627 647628 647629 647630 647646 647648 647649 647651 647652 647653 647676 647689 647690 770258 770476 770522 770849 770894 971111 1123721 1123722 Page 37 39 15 45 62 39 45 25 25 25 25 25 25 26 26 26 47 52 52 26 26 26 65 65 64 59 59, 60 59 60 61 71 64 64 Part No. 1123723 1123724 1123823 1123824 1318300 1318301 1318831 1318912 1375819 1375820 1445120 1445121 1445123 1445124 1445125 1445126 1445169 1445170 1445171 1445172 1445173 1445174 1445336 1445341 1445342 1445343 1445344 1445345 1445346 1445347 1445348 1445349 1445350 Page 65 68 69 69 65 68 69 64 31 31 9 10 9 10 9 10 9 9 9 10 10 10 31 7 7 7 7 7 7 7 7 7 7 Part No. 1445351 1445352 1445353 1445354 1445355 1445356 1445357 1445358 1445359 1445360 1445361 1445362 1445363 1445364 1445365 1445366 1445367 1445368 1445369 1445370 1445371 1445372 1445373 1445374 1445375 1445376 1744017 1744020 1744036 1744037 1744048 1744055 1744056 Page 7 7 7 7 7 7 7 7 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 48 15 67 67 67 66 66 Application Tooling Part Number Index Part No. 58009 58010 58024 58039 58040 58061 58074 58075 58082 58242 58243 58244 58245 58246 58247 58338 58392 58442 58443 Page 76, 79 76, 79 76, 78, 79 76, 79 76, 79 76, 79 76, 77, 79 76, 77 76, 79 76, 79 76, 79 76, 79 76, 79 76, 79 76, 79 76, 77, 79 76, 79 76, 79 76, 79 Part No. 58517 58575 58576 58579 58614 58635 58636 58638 58639 58644 58646 59803 59804 59836 59837 59839 59845 59848 90471 Page 31 79 79 76 59 79 79 79 76 79 79 79 79 17 41 76 79 79 59 Part No. 91112 91579 312522 354500 466468 466727 466728 466747 466947 471273 567020 567373 567827 567828 567910 680211 690675 853542 853546 Page 78, 79 64 76, 78, 79 79 59 76, 79 76, 79 17 59 78, 79 76, 79 31 31 59 31 59 78, 79 76, 79 76, 79 Part No. 853547 854175 854176 854200 854449 854468 856600 931800 933567 933568 1385286 1583503 1583514 1583515 1583516 1583517 1583518 Page 76, 76, 76, 76, 78, 76, 76, 77, 76, 76, 76, 76, 76, 76, 76, 76, 79 79 79 79 78 79 79 79 79 79 64 79 79 79 79 79 79 76, 78, 76, 78, 76, 76, 76, 76, 76, 76, 76, Part Number Index 76, 82 Catalog 82056 Revised 6-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 Global Contacts Americas Argentina - Buenos Aires Phone: +54-11-4733-2200 Fax: +54-11-4733-2211 Brasil - Sao Paulo Phone: +55-11-2103-6000 Fax: +55-11-2103-6030 Chile - Santiago Phone: +56-2-345-0361 Fax: +56-2-223-1477 Canada - Toronto Phone: +905-475-6222 Fax: +905-474-5520 Product Information Center: Phone: +905-470-4425 Fax: +905-474-5525 Colombia - Bogota Phone: +57-1-319-8959 Fax: +57-1-319-8960 Mexico - Mexico City Phone: +52-55-1106-0800 +01-800-733-8926 Fax: +52-55-1106-0901 For Latin/South American Countries not shown Phone: +54-11-4733-2015 Fax: +54-11-4733-2083 United States Harrisburg, PA Phone: +1-717-564-0100 Fax: +1-717-986-7575 Product Information Center: Phone: +1-800-522-6752 Fax: +1-717-986-7575 Troy, MI Phone: +1-248-273-3359 Fax: +1-248-273-3322 Asia/Pacific Australia - Sydney Phone: +61-2-9554-2600 Fax: +61-2-9502-2556 Product Information Center: Phone: +61-2-9840-8200 Fax: +61-2-9634-6188 India - Bangalore Phone: +91-80-285-40800 Fax: +91-80-285-40820 Indonesia - Jakarta Phone: +65-6482-0311 Fax: +65-6482-1012 Japan - Kawasaki, Kanagawa Phone: +81-44-844-8111 Fax: +81-44-812-3207 Product Information Center: Phone: +81-44-844-8013 Fax: +81-44-812-3200 Korea - Seoul Phone: +82-2-3415-4500 Fax: +82-2-3486-3810 Malaysia - Selangor Phone: +60-3-7805-3055 Fax: +60-3-7805-3066 New Zealand - Auckland Phone: +64-9-634-4580 Fax: +64-9-634-4586 Philippines - Makati City Phone: +632-848-0171 Fax: +632-867-8661 People's Republic of China Hong Kong Phone: +852-2735-1628 Fax: +852-2735-0243 Shanghai Phone: +86-21-2407-1588 Fax: +86-21-2407-1599 Singapore - Singapore Phone: +65-6482-0311 Fax: +65-6482-1012 Taiwan - Taipei Phone: +886-2-8768-2788 Fax: +886-2-8768-2268 Thailand - Bangkok Phone: +66-2-955-0500 Fax: +66-2-955-0505 Vietnam - Ho Chi Minh City Phone: +84-8-930-5546 Fax: +84-8-930-3443 Europe/Middle East /Africa Austria - Vienna Phone: +43-1-905-60-0 Fax: +43-1-905-60-1333 Product Information Center: Phone: +43-1-905-60-1249 Fax: +43-1-905-60-1251 Belarus - Minsk Phone: +375 17 237 47 94 Fax: +375 17 237 47 94 Belgium - Kessel-Lo Phone: +32-16-352-300 Fax: +32-16-352-355 Bulgaria - Sofia Phone: +359-2-971-2152 Fax: +359-2-971-2153 Czech Republic and Slovakia Czech Republic - Kurim Phone: +420-541-162-111 Fax: +420-541-162-223 Product Information Center: Phone: +420-541-162-113 Fax: +420-541-162-132 Denmark - Glostrup Phone: +45-43-48-04-00 Fax: +45-43-44-14-14 Egypt - Cairo Phone: +202-419-2334 Fax: +202-417-7647 Estonia - Tartu Phone: +372-5138-274 Fax: +372-7400-779 Finland - Helsinki Phone: +358-95-12-34-20 Fax: +358-95-12-34-250 France - Cergy-Pontoise Cedex Phone: +33-1-3420-8888 Fax: +33-1-3420-8600 Product Information Center: Phone: +33-1-3420-8686 Fax: +33-1-3420-8623 France Export Divisions - Cergy-Pontoise Cedex Phone: +33-1-3420-8804 Fax: +33-1-3420-8699 Germany - Bensheim Phone: +49-6251-133-0 Fax: +49-6251-133-1600 Product Information Center: Phone: +49-6251-133-1999 Fax: +49-6251-133-1988 Greece - Athens Phone: +30-210-9370-396/397 Fax: +30-210-9370-655 Hungary - Budapest Phone: +36-1-289-1000 Fax: +36-1-289-1010 Product Information Center: Phone: +36-1-289-1016 Fax: +36-1-289-1017 Ireland - Dublin Phone: +353-1-866-5612 Fax: +353-1-866-5714 Israel - PetachTikva Phone: +972-3-929-0999 Fax: +972-3-919-1088 Italy - Collegno (Torino) Phone: +39-011-4012-111 Fax: +39-011-4031-116 Product Information Center: Phone: +39-011-4012-428 Fax: +39-011-40-287-428 Lithuania and Latvia Lithuania - Vilnius Phone: +370-5-213-1402 Fax: +370-5-213-1403 Product Information Center: Phone: +370-5-211-3016 Fax: +370-5-213-1403 Netherlands - 's-Hertogenbosch Phone: +31-73-6246-246 Fax: +31-73-6212-365 Product Information Center: Phone: +31-73-6246-999 Fax: +31-73-6246-998 Norway - Nesbru Phone: +47-66-77-88-50 Fax: +47-66-77-88-55 Poland - Warsaw Phone: +48-22-4576-700 Fax: +48-22-4576-720 Product Information Center: Phone: +48-22-4576-704 Fax: +48-22-4576-720 Romania - Bucharest Phone: +40-21-311-3479/3596 Fax: +40-21-312-0574 Russia - Moscow Phone: +7-495-790-7902 Fax: +7-495-721-1893 Product Information Center: Phone: +7-495-790-7902-404 Fax: +7-495-790-7902-401 Russia - St. Petersburg Phone: +7-812-718-8192 Fax: +7-812-718-8193 Slovenia - Ljubljana Phone: +386-1561-3270 Fax: +386-1561-3240 South Africa - Port Elizabeth Phone: +27-41-503-4500 Fax: +27-41-581-0440 Spain - Barcelona Phone: +34-93-291-0330 Fax: +34-93-201-7879 Sweden - Upplands Vasby Phone: +46-8-50-72-50-00 Fax: +46-8-50-72-50-01 Switzerland - Steinach Phone: +41-71-447-0447 Fax: +41-71-447-0444 Turkey - Istanbul Phone: +90-212-281-8181/2/3 +90-212-282-5130/5430 Fax: +90-212-281-8184 Ukraine - Kiev Phone: +380-44-206-2265 Fax: +380-44-206-2264 Product Information Center: Phone: +380-44-206-2265 Fax: +380-44-206-2264 United Kingdom - Stanmore, Middlesex Phone: +44-8706-080208 Fax: +44-208-954-6234 Product Information Center: Freephone (UK only): +0800-267-666 Phone: +44-8706-080208 Fax: +44-208-420-8095 Tyco Electronics Corporation www.tycoelectronics.com Tyco Electronics Corporation Harrisburg, PA 82056-10K-MS-FP-6-08-OG3B |
Price & Availability of 5-640426-3
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |